EOC 10 inch 40 caliber

The EOC 10 inch 40 caliber guns were a family of related guns designed by the Elswick Ordnance Company and produced by Armstrong Whitworth in the 1890s for export customers. EOC 10 inch 40 caliber guns were the primary armament of armored cruisers, ironclads and pre-dreadnought battleships built or refit during the 1890s. These guns and their licensed derivatives armed ships of the Argentine Navy, Imperial Japanese Navy, Regia Marina and Spanish Navy. They served in the Russo-Japanese War, Italo-Turkish War and World War I.

EOC 10 inch 40 caliber
Twin gun turret of an Ammiraglio di Saint Bon-class battleship
Type	Naval gun
Place of origin	United Kingdom
Service history
In service	1895–1945
Used by	Argentine Navy Imperial Japanese Navy Regia Marina Spanish Navy
Wars	Russo-Japanese War Italo-Turkish War World War I
Production history
Designer	Elswick Ordnance Company
Designed	1893
Manufacturer	Elswick Ordnance Company Stabilimenti meccanici di Pozzuoli Kure Naval Arsenal
Produced	1893
Variants	Pattern P Pattern P1 Pattern R Cannone da 254/40 A 1893 Cannone da 254/40 A 1899 10 inch 40 caliber Type 41 25 cm 40 caliber Type 41
Specifications
Mass	30.5 long tons (31.0 t)
Length	34.6 ft (10.5 m)
Barrel length	33.3 ft (10.1 m) 40 caliber
Shell	Separate-loading 85.7 lb (38.9 kg) bagged ballistite charge
Shell weight	480–500 lb (220–230 kg)
Caliber	10.0 inches (254 mm)
Elevation	-5° to +20°
Traverse	-80° to +80°
Rate of fire	About 1.5 rounds per minute
Muzzle velocity	2,460 ft/s (750 m/s)
Maximum firing range	11.2 mi (18.0 km) at +20°

History

Development of the 10 inch 40 caliber guns began in the early 1890s at the Elswick Ordnance Company located at Newcastle upon Tyne, England. They were developed for export customers and had the EOC designations of Pattern P, Pattern P1 and Pattern R. They were built-up guns with an A tube and reinforced with two rows of hoops. Originally they had a semi-automatic screw breech mechanism, which opened the breech as the gun recoiled. However, this was found unsatisfactory and was replaced by a hand worked breech.

The Italian designation for the EOC 10 inch guns was Cannone da 254/40 A Modello 1893 and Cannone da 254/40 A Modello 1899. The Modello 1893 version was a trunnion-less gun, while the Modello 1899 had trunnions. Italian single gun mounts were electrically powered, while twin mounts were hydraulically powered. In addition to guns imported from England licensed versions were produced by the Stabilimenti meccanici di Pozzuoli (Armstrong factory) at Pozzuoli, Italy.

In 1908 the Japanese designated EOC 10 inch guns as 10 inch 40 caliber Type 41. Later in 1917, they were re-designated in centimeter as 25 cm 40 caliber Type 41. In addition to guns imported from England and Italy, four licensed versions were produced at the Kure Naval Arsenal beginning in 1908. The Kure guns differed from their English and Italian counterparts by using different rifling.

Naval use

Argentine Navy

• Giuseppe Garibaldi-class cruisers - Three of the four ships of this class purchased by Argentina had a primary armament of two Pattern P guns in single gun turrets fore and aft of the superstructure.

Italian Navy

• Ammiraglio di Saint Bon-class battleships - The two ships of this class had a primary armament of four 254/40 A guns in twin turrets fore and aft of the superstructure. Both ships saw action during the Italo-Turkish War.
• Giuseppe Garibaldi-class cruisers - The three ships of this class purchased by Italy had a mixed primary armament of one 254/40 A gun in a single turret fore and two EOC 8 inch 45 caliber guns in a twin turret aft of the superstructure. All three ships saw action during the Italo-Turkish War and World War I.
• Italian ironclad Enrico Dandolo - This ship had a primary armament of four 254/40 A guns in twin turrets en echelon amidships after an 1895-1898 refit.

Japanese Navy

• Giuseppe Garibaldi-class cruisers - One of the two ships of this class purchased by Japan the Kasuga had a mixed primary armament of one Pattern R gun in a single turret fore and two EOC 8 inch 45 caliber guns in a twin turret aft of the superstructure. The other ship the Nisshin had two EOC 8 inch 45 caliber guns in twin turrets fore and aft of the superstructure. Both ships participated in the Battle of the Yellow Sea and the Battle of Tsushima during the Russo-Japanese War.

Spanish Navy

• Giuseppe Garibaldi-class cruisers - The single ship of this class purchased by Spain, the Cristóbal Colón, was designed to carry two Pattern R guns, but the Spanish Ministry of Marine rejected them and she had to rely on ten casemated 6-inch guns. Cristóbal Colón was sunk at the battle of Battle of Santiago de Cuba during the Spanish–American War.

Army Use

As the First World War settled into trench warfare on the Italian Front, the light field guns that the combatants went to war with were beginning to show their limitations when facing an enemy who was now dug into prepared Alpine positions. Indirect fire, interdiction and counter-battery fire emphasized the importance of long-range heavy artillery. In order to address the Italian Army's lack of long-range heavy artillery, surplus 254B, 254/40, 305/17, 305/40, and 305/46 naval guns were converted to land use.

These guns were mounted on the same "De Stefano" carriage for land use and the resulting guns were classified by their size in millimeters 254, their length in calibers 40 and lastly by their carriage type DS which stood for De Stefano or 254/40 DS. The De Stefano carriage was a clever, but strange looking monstrosity which looked something like a child's 4-wheeled toy-horse when the gun barrel was elevated. The carriage was a large 4-wheeled box-trail design with two non-steerable wheels on the front and two castering wheels at the rear. The wheels were fitted with detachable grousers designed by Major Crispino Bonagente for traction on soft ground and was towed in one piece by a Pavesi-Tolotti artillery tractor.

When not on the move the grousers were removed and the steel wheels rode on an inclined set of steel rails when in firing position. The steel rails were mounted on a firing platform made of wooden beams which allowed the gun 360° of traverse. When the gun fired recoil which was not absorbed by the recoil mechanism was transmitted to the wheels and the carriage rolled up the inclined rails and then rolled back into firing position. The box trail carriage was tall and wide enough that the breech of the gun was accessible at high angles of elevation without a pit being dug and the gun crew had a bucket and hoist for ammunition handling.

Ammunition

Ammunition was of separate loading bagged charge and projectile type. The bagged ballistite charge weighed 85.7 lb (38.9 kg) and projectiles weighed between 480–500 lb (220–230 kg).

The gun was able to fire:

• Armor Piercing
• Armor Piercing capped
• Common

Photo gallery

• 
  ARA Garibaldi
• 
  Top view of a twin 10-inch gun turret
• 
  A 254/40 gun on a De Stefano carriage.
• 
  A 254/40 gun in traveling position showing its castering rear wheels and Bonagente grousers.
• 
• 
• 

References

• Campbell, John (1985). Naval Weapons of World War II. Annapolis, MD: Naval Institute Press. ISBN 0-87021-459-4.
• Friedman, Norman (2011). Naval Weapons of World War One. Barnsley, South Yorkshire, UK: Seaforth. ISBN 978-1-84832-100-7.

External links

• http://www.navweaps.com/Weapons/WNJAP_10-40_EOC.php
• http://www.historicaleye.it/pozzuoli-dai-cantieri-armstrong-alla-breda-sofer/
• http://oldbritishguns.com/elswick-ordnance-co