25 cm schwerer Minenwerfer

(Redirected from 25 cm schwere Minenwerfer)

The 25 cm schwerer Minenwerfer (heavy mine launcher), often abbreviated as 25 cm sMW, was a heavy mine shell launching trench mortar developed for the Imperial German Army in the first decade of the 20th century.

25 cm schwerer Minenwerfer
25 cm schwered Minenwerfer n/A model with wheels attached, Warsaw, 2007.
TypeHeavy trench mortar
Place of originGerman Empire
Service history
In service1910–1918
Used byGerman Empire
WarsWorld War I
Production history
DesignerRheinmetall
Designed1907–09
ManufacturerRheinmetall
Produced1910–18
No. builtapprox. 1,234
Variants25 cm sMW n/A
Specifications
Mass768 kg (1,693 lb)
Barrel lengtha/A: 75 cm (2 ft 6 in) L/3
n/A: 1.25 m (4 ft 1 in) L/5

Shellseparate-loading, 4 disk charges
Calibre250 millimeters (9.8 in)
Recoilhydro-spring
Carriagebox trail
Elevation+45° to 75°
Traverse12°
Rate of fire20 rounds per hour
Muzzle velocity200 m/s (660 ft/s)
Effective firing range540 m (590 yd)
Maximum firing range970 m (1,060 yd)
Sightspanoramic

Design and development

edit

It was developed for use by engineer troops after the Siege of Port Arthur during the Russo-Japanese War of 1904–05 illustrated the usefulness of this class of weapon in destroying bunkers and fortifications immune to normal artillery. The 25 cm schwerer Minenwerfer was a muzzle-loading, rifled mortar that had a hydro-spring type recoil system. It fired either a 97 kg (214 lb) shell or a 50 kg (110 lb) mine shell; both containing far more explosive filler than ordinary artillery ammunition of the same caliber. The low muzzle velocity allowed for thinner shell walls, hence more space for filler for the same weight shell. The low velocity also allowed the use of explosives like ammonium nitratecarbon that were less shock-resistant than TNT, which was in short supply. Shells filled with these substitutes nonetheless were the cause of many premature detonations, making the Minenwerfer riskier for the gun crew than normal artillery pieces.

Service

edit

The wheels were removed and the sMW was then placed in a pit or trench at least 1.5 meters (4 ft 11 in) deep, protecting the mortar and its crew. Despite the extremely short range, the sMW proved to be potent as its massive shells were almost as effective in penetrating fortifications as the largest siege guns in the German inventory, including the 42 centimeters (17 in) Dicke Bertha (Big Bertha), a howitzer that was more than 50 times the weight of the sMW. The value of the sMW is indicated by the number in service, which increased from 44 when the war broke out, to 1,234 at its end.

In 1916, a new longer-barrelled version was put into production. This new model, which had a longer range with an L/5 barrel, was named the 25 cm schwerer Minenwerfer neuer Art (new pattern), which was abbreviated to 25 cm sMW n/A. The older, short-barrel L/3 model was then renamed 25 cm sMW a/A (alter Art) (old pattern).[1]

A middle variant, which consisted of simply adding a 500mm barrel extension to existing a/A mortars, was the 25 cm schwerer Minenwerfer 16a.[2][1]

edit

See also

edit

Comparable weapons

edit

References

edit
  1. ^ a b Tillmann Reibert. Die Entwicklung des Granatwerfers im Ersten Weltkrieg | Die Entstehung eines neuartigen Waffentyps als Reaktion auf die Bedingungen des Stellungskrieges [The development of the grenade launcher in the First World War | The emergence of a new type of weapon as a reaction to the conditions of trench warfare] (PDF) (PhD thesis) (in German). University of Hamburg.
  2. ^ Bernard Plumier. "Surviving Gun File #171". passioncompassion1418.com.
edit