The Akaflieg Stuttgart fs24, nicknamed Phönix (German: "Phoenix"), was a glider designed and built in West Germany from 1951.

fs24 Phönix
fs24 in the Deutsches Museum in Munich
General information
TypeSailplane
National originWest Germany
ManufacturerAkaflieg Stuttgart
Designer
Number built9
History
First flight27 November 1957

Design and development

edit

The fs24 was the first glider to use fibreglass in its construction. The development of modern aerofoil sections for gliders required very accurate reproduction with smooth surfaces, using tolerances that were extremely difficult to achieve using conventional wood or metal construction, but could be achieved by using composite materials laid up in a mould.

The design of the fs24 was started at Akaflieg Stuttgart, (Akademische Fliegergruppe - academic flying group), by Richard Eppler and Hermann Nägele in 1951. Originally it was constructed of balsa wood with a strengthened outer layer of paper and glue layers, which proved unsatisfactory. The project was abandoned until a grant for further research was received from the state of Baden-Württemberg. By then glass fibre reinforced polyester resin was available and so it was redesigned using a balsa wood/glass fibre sandwich, with the load-bearing points and the edge of the cockpit canopy strengthened with plywood.

The first flight was made on 27 November 1957, and good performance and excellent handling were demonstrated, especially in weak thermal conditions. The prototype had a conventional tail unit and a bumper instead of a conventional undercarriage. Airbrakes were fitted on the underside of the wing trailing edges.

Bölkow built eight fs24s, designated Phönix T, differing in the use of a T-tail and retractable undercarriage.[1]

Variants

edit
fs24 Phönix
16m sailplane certified in January 1959 and manufactured by Akademische Fliegergruppe Stuttgart
fs24 Phönix TO
16m sailplane with a T-tail certified in May 1960 and manufactured by Apparatebau Nabern.
fs24 Phönix T
16m sailplane certified in April 1961 and manufactured by Apparatebau Nabern.

Surviving aircraft

edit

The prototype fs24 Phönix is on display at the Deutsches Museum in Munich, Germany.[2]

D-8353 is part of the collection of the Deutsches Segelflugmuseum at Wasserkuppe, Germany.[3]

Specifications

edit
 
FS 24 Stamp

Data from The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde[4][5]

General characteristics

  • Crew: 1
  • Length: 6.84 m (22 ft 5 in)
  • Wingspan: 16 m (52 ft 6 in)
  • Height: 0.95 m (3 ft 1 in)
  • Wing area: 14.36 m2 (154.6 sq ft)
  • Aspect ratio: 17.83
  • Airfoil: EC 86 (-3) - 914
  • Empty weight: 161.7 kg (356 lb)
  • Max takeoff weight: 265 kg (584 lb)

Performance

  • Stall speed: 43 km/h (27 mph, 23 kn)
  • Never exceed speed: 140 km/h (87 mph, 76 kn)
  • Rough air speed max: 100 km/h (62.1 mph; 54.0 kn)
  • Aerotow speed: 100 km/h (62.1 mph; 54.0 kn)
  • Winch launch speed: 90 km/h (55.9 mph; 48.6 kn)
  • g limits: +4 -2
  • Maximum glide ratio: ~37 at 77–80.2 km/h (47.8–49.8 mph; 41.6–43.3 kn)
  • Rate of sink: 0.53 m/s (104 ft/min) at 69.2 km/h (43.0 mph; 37.4 kn)
  • Wing loading: 18.5 kg/m2 (3.8 lb/sq ft)

See also

edit

Aircraft of comparable role, configuration, and era

Related lists

References

edit

Notes

edit
  1. ^ Akaflieg Stuttgart 90 Jahre Forschen-Bauen-Fliegen (in German) (1st ed.). Stuttgart: Akaflieg Stuttgart e.V. 2016. pp. 187–196.
  2. ^ "Akaflieg Stuttgart fs-24 Phönix, 1957". Archived from the original on 23 September 2015. Retrieved 13 June 2013.
  3. ^ "Bölkow fs-24 "Phönix T0"". Archived from the original on 5 March 2016. Retrieved 13 June 2013.
  4. ^ Shenstone, B.S.; K.G. Wilkinson; Peter Brooks (1958). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs dans Le Monde (in French and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 51–54.
  5. ^ "fs 24 - Phönix". Stuttgart University. Retrieved 13 June 2013.

Bibliography

edit
edit