Wikipedia

Allotropes of sulfur

(Redirected from Allotropes of sulphur)

The element sulfur exists as many allotropes. In number of allotropes, sulfur is second only to carbon.[1] In addition to the allotropes, each allotrope often exists in polymorphs (different crystal structures of the same covalently bonded Sn molecules) delineated by Greek prefixes (α, β, etc.).[2]

Cyclo-octasulfur (cyclo-S8 or cyclooctasulfane), the most prevalent allotrope of sulfur in nature.

Furthermore, because elemental sulfur has been an item of commerce for centuries, its various forms are given traditional names. Early workers identified some forms that have later proved to be single or mixtures of allotropes. Some forms have been named for their appearance, e.g. "mother of pearl sulfur", or alternatively named for a chemist who was pre-eminent in identifying them, e.g. "Muthmann's sulfur I" or "Engel's sulfur".[2][3]

The most commonly encountered form of sulfur is the orthorhombic polymorph of S8, which adopts a puckered ring – or "crown" – structure. Two other polymorphs are known, also with nearly identical molecular structures.[4] In addition to S8, sulfur rings of 6, 7, 9–15, 18, and 20 atoms are known.[5] At least five allotropes are uniquely formed at high pressures, two of which are metallic.[6]

The number of sulfur allotropes reflects the relatively strong S−S bond of 265 kJ/mol.[1] Furthermore, unlike most elements, the allotropes of sulfur can be manipulated in solutions of organic solvents and are analysed by HPLC.[7]

Phase diagram

edit
 
A historic phase diagram of sulfur. A phase diagram from 1975, presenting data through 1970. The ordinate is pressure in kilobars (kbar). and the abscissa is temperature in kelvins (K). (The temperatures 200, 400, 600, and 800 K correspond to the approximate temperatures of −73, 127, 327, and 527 °C, respectively.) The Roman numerals I-XII refer to known solid phases identified by "volumetric, optical, and electrical resistance techniques," and letters A-E to putative distinct liquid "phases" identified by differential thermal analysis. Phase information is based on the work of G. C. Vezzoli, et al., as reviewed by David Young; as Young notes, "The literature on the allotropy of sulfur presents the most complex and confused situation of all the elements."[8][9] Phase information are limited to ≤50 kbar and thus omitting metallic phases.[10]

The pressure-temperature (P-T) phase diagram for sulfur is complex (see image). The region labeled I (a solid region), is α-sulfur.[11]

High-pressure solid allotropes

edit

In a high-pressure study at ambient temperatures, four new solid forms, termed II, III, IV, V have been characterized, where α-sulfur is form I.[11] Solid forms II and III are polymeric, while IV and V are metallic (and are superconductive below 10 K and 17 K, respectively).[12] Laser irradiation of solid samples produces three sulfur forms below 200–300 kbar (20–30 GPa).[13]

Solid cyclo allotrope preparation

edit

Two methods exist for the preparation of the cyclo-sulfur allotropes. One of the methods, which is most famous for preparing hexasulfur, is to treat hydrogen polysulfides with polysulfur dichloride:

H2Sx + SyCl2 → cyclo-Sx+y + 2 HCl

A second strategy uses titanocene pentasulfide as a source of the S2−5 unit. This complex is easily made from polysulfide solutions:[14]

[NH4]2S5 + (η5-C5H5)2TiCl2 → (η5-C5H5)2TiS5 + 2 [NH4]Cl

Titanocene pentasulfide reacts with polysulfur chloride:[15]

(η5-C5H5)2TiS5 + SyCl2 → cyclo-Sy+5 + (η5-C5H5)2TiCl2

Solid cyclo-sulfur allotropes

edit

Cyclo-hexasulfur, cyclo-S6

edit
Main article: Hexasulfur
 
Cyclo-hexasulfur, cyclo-S6

This allotrope was first prepared by M. R. Engel in 1891 by treating thiosulfate with HCl.[5] Cyclo-S6 is orange-red and forms a rhombohedral crystal.[16] It is called ρ-sulfur, ε-sulfur, Engel's sulfur and Aten's sulfur.[2] Another method of preparation involves the reaction of a polysulfane with sulfur monochloride:[16]

H2S4 + S2Cl2 → cyclo-S6 + 2 HCl (dilute solution in diethyl ether)

The sulfur ring in cyclo-S6 has a "chair" conformation, reminiscent of the chair form of cyclohexane. All of the sulfur atoms are equivalent.[16]

Cyclo-heptasulfur, cyclo-S7

edit
 
Structure of cyclo-S7.

It is a bright yellow solid. Four (α-, β-, γ-, δ-) forms of cyclo-heptasulfur are known.[17] Two forms (γ-, δ-) have been characterized. The cyclo-S7 ring has an unusual range of bond lengths of 199.3–218.1 pm. It is said to be the least stable of all of the sulfur allotropes.[18]

Cyclo-octasulfur, cyclo-S8

edit
Main article: Octasulfur

Octasulfur contains puckered S8 rings, and is known in three forms that differ only in the way the rings are packed in the crystal.

α-Sulfur

edit

α-Sulfur is the form most commonly found in nature.[4] When pure it has a greenish-yellow colour (traces of cyclo-S7 in commercially available samples make it appear yellower). It is practically insoluble in water and is a good electrical insulator with poor thermal conductivity. It is quite soluble in carbon disulfide: 35.5 g/100 g solvent at 25 °C. It has an orthorhombic crystal structure.[4] α-Sulfur is the predominant form found in "flowers of sulfur", "roll sulfur" and "milk of sulfur".[19] It contains S8 puckered rings, alternatively called a crown shape. The S–S bond lengths are all 203.7 pm and the S-S-S angles are 107.8° with a dihedral angle of 98°.[16] At 95.3 °C, α-sulfur converts to β-sulfur.[4]

β-Sulfur

edit

β-Sulfur is a yellow solid with a monoclinic crystal form and is less dense than α-sulfur. It is unusual because it is only stable above 95.3 °C; below this temperature it converts to α-sulfur. β-Sulfur can be prepared by crystallising at 100 °C and cooling rapidly to slow down formation of α-sulfur.[5] It has a melting point variously quoted as 119.6 °C[20] and 119.8 °C but as it decomposes to other forms at around this temperature the observed melting point can vary. The 119 °C melting point has been termed the "ideal melting point" and the typical lower value (114.5 °C) when decomposition occurs, the "natural melting point".[20]

γ-Sulfur

edit

γ-Sulfur was first prepared by F.W. Muthmann in 1890. It is sometimes called "nacreous sulfur" or "mother of pearl sulfur" because of its appearance. It crystallises in pale yellow monoclinic needles. It is the densest form of the three. It can be prepared by slowly cooling molten sulfur that has been heated above 150 °C or by chilling solutions of sulfur in carbon disulfide, ethyl alcohol or hydrocarbons.[5] It is found in nature as the mineral rosickyite.[21] It has been tested in carbon fiber-stabilized form as a cathode in lithium-sulfur (Li-S) batteries and was observed to stop the formation of polysulfides that compromise battery life.[22]

Cyclo-Sn (n = 9–15, 18, 20)

edit
 
Cyclo-dodecasulfur, cyclo-S12

These allotropes have been synthesised by various methods for example, treating titanocene pentasulfide and a dichlorosulfane of suitable sulfur chain length, Sn−5Cl2:[17]

(η5-C5H5)2TiS5 + Sn−5Cl2 → cyclo-Sn + (η5-C5H5)2TiCl2

or alternatively treating a dichlorosulfane, Sn−mCl2 and a polysulfane, H2Sm:[17]

Sn−mCl2 + H2Sm → cyclo-Sn + 2 HCl

S12, S18, and S20 can also be prepared from S8.[20] With the exception of cyclo-S12, the rings contain S–S bond lengths and S-S-S bond angle that differ one from another.[16]

Cyclo-S12 is the most stable cyclo-allotrope. Its structure can be visualised as having sulfur atoms in three parallel planes, 3 in the top, 6 in the middle and three in the bottom.[23]

Two forms (α-, β-) of cyclo-S9 are known, one of which has been characterized.[24]

Two forms of cyclo-S18 are known where the conformation of the ring is different. To differentiate these structures, rather than using the normal crystallographic convention of α-, β-, etc., which in other cyclo-Sn compounds refer to different packings of essentially the same conformer, these two conformers have been termed endo- and exo-.[25]

Cyclo-S6·cyclo-S10 adduct

edit

This adduct is produced from a solution of cyclo-S6 and cyclo-S10 in CS2. It has a density midway between cyclo-S6 and cyclo-S10. The crystal consists of alternate layers of cyclo-S6 and cyclo-S10. This material is a rare example of an allotrope that contains molecules of different sizes.[26]

Catena sulfur forms

edit

The term "Catena sulfur forms" refers to mixtures of sulfur allotropes that are high in catena (polymer chain) sulfur. The naming of the different forms is very confusing and care has to be taken to determine what is being described because some names are used interchangeably.[2]

Amorphous sulfur

edit

Amorphous sulfur is the quenched product from molten sulfur hotter than the λ-transition at 160 °C, where polymerization yields catena sulfur molecules.[2] (Above this temperature, the properties of the liquid melt change remarkably. For example, the viscosity increases more than 10000-fold as the temperature increases through the transition[2][27]). As it anneals, solid amorphous sulfur changes from its initial glassy form, to a plastic form, hence its other names of plastic, and glassy or vitreous sulfur. The plastic form is also called χ-sulfur.[2] Amorphous sulfur contains a complex mixture of catena-sulfur forms mixed with cyclo-forms.[28]

Insoluble sulfur

edit

Insoluble sulfur is obtained by washing quenched liquid sulfur with CS2.[29] It is sometimes called polymeric sulfur, μ-S or ω-S.[2]

Fibrous (φ-) sulfur

edit

Fibrous (φ-) sulfur is a mixture of the allotropic ψ- form and γ-cyclo-S8.[30]

ω-Sulfur

edit

ω-Sulfur is a commercially available product prepared from amorphous sulfur that has not been stretched prior to extraction of soluble forms with CS2. It sometimes called "white sulfur of Das" or supersublimated sulfur. It is a mixture of ψ-sulfur and lamina sulfur. The composition depends on the exact method of production and the sample's history. One well known commercial form is "Crystex". ω-sulfur is used in the vulcanization of rubber.[19]

λ-Sulfur

edit

λ-Sulfur is molten sulfur just above the melting temperature. It is a mixture containing mostly cyclo-S8.[2] Cooling λ-sulfur slowly gives predominantly β-sulfur.[31]

μ-Sulfur

edit

μ-Sulfur is the name applied to solid insoluble sulfur and the melt prior to quenching.[29]

π-Sulfur

edit

π-Sulfur is a dark-coloured liquid formed when λ-sulfur is left to stay molten. It contains mixture of Sn rings.[20]

Biradical catena (S∞) chains

edit

This term is applied to biradical catena-chains in sulfur melts or the chains in the solid.[32]

Solid catena allotropes

edit
 
Two parallel monatomic sulfur chains grown inside a single-wall carbon nanotube (CNT, a) Zig-zag (b) and straight (c) S chains inside double-wall CNTs.[33]

The production of pure forms of catena-sulfur has proved to be extremely difficult. Complicating factors include the purity of the starting material and the thermal history of the sample.

ψ-Sulfur

edit

This form, also called fibrous sulfur or ω1-sulfur,[2] has been well characterized. It has a density of 2.01 g·cm−3 (α-sulfur 2.069 g·cm−3) and decomposes around its melting point of 104 °C. It consists of parallel helical sulfur chains. These chains have both left and right-handed "twists" and a radius of 95 pm. The S–S bond length is 206.6 pm, the S-S-S bond angle is 106° and the dihedral angle is 85.3°, (comparable figures for α-sulfur are 203.7 pm, 107.8° and 98.3°).[27]

Lamina sulfur

edit

Lamina sulfur has not been well characterized but is believed to consist of criss-crossed helices. It is also called χ-sulfur or ω2-sulfur.[2]

High-temperature gaseous allotropes

edit

Monatomic sulfur can be produced from photolysis of carbonyl sulfide.[34]

Disulfur, S2

edit
Main article: Disulfur

Disulfur, S2, is the predominant species in sulfur vapour above 720 °C (a temperature above that shown in the phase diagram); at low pressure (1 mmHg) at 530 °C, it comprises 99% of the vapor.[citation needed] It is a triplet diradical (like dioxygen and sulfur monoxide), with an S−S bond length of 188.7 pm.[citation needed] The blue colour of burning sulfur is due to the emission of light by the S2 molecule produced in the flame.[35]

The S2 molecule has been trapped in the compound [S2I4]2+([EF6]−)2 (E = As, Sb) for crystallographic measurements, produced by treating elemental sulfur with excess iodine in liquid sulfur dioxide.[citation needed] The [S2I4]2+ cation has an "open-book" structure, in which each [I2]+ ion donates the unpaired electron in the π* molecular orbital to a vacant orbital of the S2 molecule.[citation needed]

Trisulfur, S3

edit
Main article: Trisulfur

S3 is found in sulfur vapour, comprising 10% of vapour species at 440 °C and 10 mmHg. It is cherry red in colour, with a bent structure, similar to ozone, O3.[35]

Tetrasulfur, S4

edit

S4 has been detected in the vapour phase, but it has not been well characterized. Diverse structures (e.g. chains, branched chains and rings) have been proposed.[citation needed]

Theoretical calculations suggest a cyclic structure.[36]

Pentasulfur, S5

edit

Pentasulfur has been detected in sulfur vapours but has not been isolated in pure form.[37]

List of allotropes and forms

edit

Allotropes are in Bold.

Formula/name Common name Other names[2] Notes
S2 disulfur A diatomic gas with a triplet ground state like dioxygen.[35]
S3 trisulfur A cherry red triatomic gas with a bent ozone-like structure.[27]
S4 tetrasulfur Structure not determined but calculations indicate it to be cyclo-S4.[38]
cyclo-S5 cyclo-pentasulfur Not yet isolated, only detected in sulfur vapour.[37]
cyclo-S6 ρ-sulfur cyclo-hexasulfur, "ε-sulfur", "Engel's" sulfur, "Aten's sulfur" The ring adopts a chair form in the solid.[5]
cyclo-S6·cyclo-S10 adduct A mixed crystal with alternating layers of cyclo-S6 and cyclo-S10.[26]
cyclo-S7 α-, β-, γ-, δ- cycloheptasulfur Four forms known, two(γ-, δ- ) characterized.[18]
cyclo-S8 α-sulfur "orthorhombic sulfur" "rhombic sulfur", "flowers of sulfur", "roll sulfur" "milk of sulfur", "Muthmann's sulfur I" Yellow solid consisting of S8 puckered rings. The thermodynamically stable form at ordinary temperatures.[4]
cyclo-S8 β-sulfur "monoclinic sulfur" "prismatic sulfur" "Muthmann's sulfur II" Yellow crystalline solid, consisting of S8 puckered rings. Only stable above 95.3 °C, it reverts to α-sulfur at room temperature.[5]
cyclo-S8 γ-sulfur "nacreous sulfur" "mother of pearl sulfur" "Gernez’s sulfur" or "Muthmann's sulfur III". Light yellow solid, crystal monoclinic, consisting of S8 puckered rings.[5] Found in nature as the rare mineral rosickyite.[21]
cyclo-Sn
n = 9–15, 18, 20		 cyclo-(nona; deca; undeca; dodeca; trideca; tetradeca; pentadeca; octadeca; eicosa)sulfur Pure forms all allotropes, cyclo-S9 has four forms, cyclo-S18 has two forms. Generally synthesised rather than obtained by treatment of another form of elemental sulfur.[23]
catena-Sx fibrous (ψ) sulfur Well characterized, contains parallel helical sulfur chains and is difficult to obtain pure.[27]
catena-Sx lamina sulfur Not well characterized, contains helical chains partially crossed.
amorphous sulfur "plastic sulfur" Quenched molten sulfur at first solidifies to amorphous or glassy sulfur. Consists of a mixture of catena sulfur and cyclo sulfur.
insoluble sulfur Quenched liquid sulfur with soluble species extracted with CS2. Sometimes called polymeric sulfur, μ-S or ω-S.
φ-sulfur A mixture of allotropic ψ-sulfur and cyclo forms mainly γ-cyclo-S8.[30]
ω-sulfur insoluble sulfur A mixture of chains with a minimum of soluble species.[29]
λ-sulfur Light yellow mobile liquid formed when β-sulfur first melts at 119.6 °C. Consists of S8 rings.[20]
μ-sulfur The dark-coloured viscous liquid formed when π-sulfur is heated and the solid when cooled. Contains a mixture of polymeric chains.[20]
π-sulfur Dark-coloured liquid that develops as λ-sulfur is left molten. Contains mixture of Sn rings.[20]
High-pressure forms of α-sulfur S-II, S-III, S-IV, S-V and others Four high-pressure phases (at ambient temperature) including two that are metallic and become superconducting at low temperature[11][12] and some additional phases photo-induced below 20–30 GPa.

References

edit
  1. ^ a b Greenwood, 652
  2. ^ a b c d e f g h i j k l Theilig, Eilene (1982). A primer on sulfur for the planetary geologist. NASA Contractor Report 3594, Grant NAGW-132, Office of Space Science and Applications, Washington, DC, USA: National Aeronautics and Space Administration, Scientific and Technical Information Branch. p. 4.
  3. ^ Steudel, 17
  4. ^ a b c d e Greenwood, 654
  5. ^ a b c d e f g Greenwood, 655
  6. ^ Steudel, 59
  7. ^ Tebbe, F. N.; Wasserman, E.; Peet, W. G.; Vatvars, A.; Hayman, A. C. (1982). "Composition of Elemental Sulfur in Solution: Equilibrium of S6, S7, and S8 at Ambient Temperatures". Journal of the American Chemical Society. 104 (18): 4971. doi:10.1021/ja00382a050.
  8. ^ Young, David A. (1975) "Phase Diagrams of the Elements", pp. 14–16 in Lawrence Livermore National Laboratory Report UCRL-51902, Contract No. W-7405-Eng-48, U.S. Energy Research & Development Administration, Springfield, VA, USA: U.S. Department of Commerce, National Technical Information Service.
  9. ^ Vezzoli, Gary C.; Zeto, Robert J. (1970). "Ring → Chain high-pressure polymorphic transformation in sulfur and the accompanying change from insulating to modest semiconducting behavior". Inorganic Chemistry. 9 (11): 2478. doi:10.1021/ic50093a020.
  10. ^ Hemley, Russell J.; Struzhkin, Viktor V.; Mao, Ho-Kwang; Timofeev, Yuri A. (1997). "Superconductivity at 10–17 K in compressed sulphur". Nature. 390 (6658): 382. Bibcode:1997Natur.390..382S. doi:10.1038/37074. S2CID 4428316.
  11. ^ a b c Degtyareva O; Gregoryanz E; Somayazulu M; Ho-Kwang Mao; Hemley R J (2005). "Crystal structure of superconducting phases of S and Se". Phys. Rev. B. 71 (21): 214104. arXiv:cond-mat/0501079. Bibcode:2005PhRvB..71u4104D. doi:10.1103/PhysRevB.71.214104. S2CID 119503734.
  12. ^ a b Gregoryanz E; Struzhkin V; Hemley, R J; Eremets, M I; Mao Ho-Kwang; Timofeev Y A (2002). "Superconductivity in the chalcogens up to multimegabar pressures". Physical Review B. 65 (6): 064504. arXiv:cond-mat/0108267. Bibcode:2002PhRvB..65f4504G. doi:10.1103/PhysRevB.65.064504. S2CID 5826674.
  13. ^ Steudel, 63
  14. ^ Shaver, Alan; Mccall, James M.; Marmolejo, Gabriela (1990). "Cyclometallapolysulfanes (And Selanes) of Bis(η 5 -Cyclopentadienyl) Titanium(IV), Zirconium(IV), Molybdenum(IV), and Tungsten(IV)". Inorganic Syntheses. Vol. 27. pp. 59–65. doi:10.1002/9780470132586.ch11. ISBN 9780470132586.
  15. ^ Housecroft, Catherine E.; Sharpe, Alan G. (2008). "Chapter 16: The group 16 elements". Inorganic Chemistry, 3rd Edition. Pearson. p. 498. ISBN 978-0-13-175553-6.
  16. ^ a b c d e Greenwood, 656
  17. ^ a b c Greenwood, 657
  18. ^ a b Steudel, 6
  19. ^ a b Steudel, 15
  20. ^ a b c d e f g Wiberg, Egon; Holleman, Arnold Frederick (2001). Inorganic Chemistry. Elsevier. ISBN 0-12-352651-5.
  21. ^ a b Steudel, 7
  22. ^ Pai, Rahul; Singh, Arvinder; Tang, Maureen H.; Kalra, Vibha (10 February 2022). "Stabilization of gamma sulfur at room temperature to enable the use of carbonate electrolyte in Li-S batteries". Communications Chemistry. 5 (1): 17. doi:10.1038/s42004-022-00626-2. ISSN 2399-3669. PMC 9814344. PMID 36697747. S2CID 246704531.
  23. ^ a b Greenwood, 658
  24. ^ Steudel, 8
  25. ^ Steudel, 13, 37
  26. ^ a b Steudel, 9
  27. ^ a b c d Greenwood, 660
  28. ^ Steudel, 42
  29. ^ a b c Steudel, 3
  30. ^ a b Steudel, 43
  31. ^ Steudel, 26
  32. ^ Greenwood, 662
  33. ^ Fujimori, Toshihiko; Morelos-Gómez, Aarón; Zhu, Zhen; Muramatsu, Hiroyuki; Futamura, Ryusuke; Urita, Koki; Terrones, Mauricio; Hayashi, Takuya; Endo, Morinobu; Young Hong, Sang; Chul Choi, Young; Tománek, David; Kaneko, Katsumi (2013). "Conducting linear chains of sulphur inside carbon nanotubes". Nature Communications. 4: 2162. Bibcode:2013NatCo...4.2162F. doi:10.1038/ncomms3162. PMC 3717502. PMID 23851903.
  34. ^ Eberhard Leppin and Klaus Gollnick (1970), "Direct photolysis of carbonyl sulfide in solution" I (Mechanism) and II (Reactions); Journal of the American Chemical Society vol. 92 issue 8, pp. 2217–2227. doi:10.1021/ja00711a004 and 10.1021/ja00711a005.
  35. ^ a b c Greenwood, 661
  36. ^ Steudel 2004.
  37. ^ a b Steudel 2004, p. 126.
  38. ^ Wong, Ming Wah; Steudel, Ralf (2003). "Structure and spectra of tetrasulfur S4 – an ab initio MO study". Chemical Physics Letters. 379 (1–2): 162–169. Bibcode:2003CPL...379..162W. doi:10.1016/j.cplett.2003.08.026.

Bibliography

edit
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=Allotropes_of_sulfur&oldid=1254820213"