1-Naphthol, or α-naphthol, is a organic compound with the formula C10H7OH. It is a fluorescent white solid. 1-Naphthol differs from its isomer 2-naphthol by the location of the hydroxyl group on the naphthalene ring. The naphthols are naphthalene homologues of phenol. Both isomers are soluble in simple organic solvents. They are precursors to a variety of useful compounds.[2]

1-Naphthol
Names
Preferred IUPAC name
Naphthalen-1-ol
Other names
1-Hydroxynaphthalene; 1-Naphthalenol; α-Naphthol
Identifiers
3D model (JSmol)
1817321
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.001.791 Edit this at Wikidata
EC Number
  • 201-969-4
69192
KEGG
UNII
  • InChI=1S/C10H8O/c11-10-7-3-5-8-4-1-2-6-9(8)10/h1-7,11H checkY
    Key: KJCVRFUGPWSIIH-UHFFFAOYSA-N checkY
  • InChI=1/C10H8O/c11-10-7-3-5-8-4-1-2-6-9(8)10/h1-7,11H
    Key: KJCVRFUGPWSIIH-UHFFFAOYAZ
  • Oc2cccc1ccccc12
Properties
C10H8O
Molar mass 144.17 g/mol
Appearance Colorless or white solid
Density 1.10 g/cm3
Melting point 95 to 96 °C (203 to 205 °F; 368 to 369 K)
Boiling point 278 to 280 °C (532 to 536 °F; 551 to 553 K)
-98.2·10−6 cm3/mol
Hazards
GHS labelling:[1]
GHS05: CorrosiveGHS06: ToxicGHS07: Exclamation markGHS09: Environmental hazard
Danger
H302, H311, H312, H315, H317, H318, H335, H410, H412
P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P317, P302+P352, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P332+P317, P333+P317, P361+P364, P362+P364, P391, P403+P233, P405, P501
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Production

edit

1-Naphthol is prepared by two main routes.[2] In one method, naphthalene is nitrated to give 1-nitronaphthalene, which is hydrogenated to the amine followed by hydrolysis:

C10H8 + HNO3 → C10H7NO2 + H2O
C10H7NO2 + 3H2 → C10H7NH2 + 2H2O
C10H7NH2 + H2O → C10H7OH + NH3

Alternatively, naphthalene is hydrogenated to tetralin, which is oxidized to 1-tetralone, which undergoes dehydrogenation.

Reactions

edit

Some reactions of 1-naphthol are explicable with reference to its tautomerism, which produces a small amount of the keto tautomer.[citation needed]

 

One consequence of this tautomerism is the Bucherer reaction, the ammonolysis of 1-naphthol to give 1-aminonaphthalene.

1-Naphthol biodegrades via formation of 1-naphthol-3,4-oxide, which converts to 1,4-naphthoquinone.[3]

The 4-position of 1-naphthol is susceptible to electrophilic attack. This regioselective reaction is exploited in the preparation of diazo dyes, which are form using diazonium salts. Reduction of the diazo derivatives gives 4-amino-1-naphthol.[4][5]

Partial reduction of 1-naphthol gives the tetrahydro derivative, leaving intact the phenol ring.[6] Full hydrogenation is catalyzed by rhodium.[7]

Applications and occurrence

edit

1-Naphthol is a precursor to a variety of insecticides including carbaryl and pharmaceuticals including nadolol[8][9] as well as for the antidepressant sertraline[10] and the anti-protozoan therapeutic atovaquone.[11] It undergoes azo coupling to give various azo dyes, but these are generally less useful than those derived from 2-naphthol.[2][12]

1-Naphthol is a metabolite of the insecticide carbaryl and naphthalene. Along with TCPy, it has been shown to decrease testosterone levels in adult men.[13]

Other uses

edit

1-Naphthol is used in each of the following chemical tests, which predate the use of spectroscopic and chromatographic methods:

Safety

edit

1-Naphthol has been described as "moderately toxic".[2]

References

edit
  1. ^ "1-Naphthol". pubchem.ncbi.nlm.nih.gov.
  2. ^ a b c d Booth, Gerald (2005). "Naphthalene Derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a17_009. ISBN 978-3527306732.. full-text PDF
  3. ^ Yoshito Kumagai; Yasuhiro Shinkai; Takashi Miura; Arthur K. Cho (2011). "The Chemical Biology of Naphthoquinones and Its Environmental Implications". Annual Review of Pharmacology and Toxicology. 52: 221–47. doi:10.1146/annurev-pharmtox-010611-134517. PMID 21942631.
  4. ^ J. B. Conant; R. E. Lutz; B. B. Corson (1923). "1,4-Aminonaphthol Hydrochloride". Organic Syntheses. 3: 7. doi:10.15227/orgsyn.003.0007.
  5. ^ Louis F. Fieser (1937). "1,2-Aminonaphthol Hydrochloride". Organic Syntheses. 17: 9. doi:10.15227/orgsyn.017.0009.
  6. ^ C. David Gutsche; Hugo H. Peter (1957). "Ar-Tetrahydro-a-Naphthol". Organic Syntheses. 37: 80. doi:10.15227/orgsyn.037.0080.
  7. ^ A. I. Meyers; W. N. Beverung; R. Gault (1971). "Hydrogenation of Aromatic Nuclei: 1-Decalol". Organic Syntheses. 51: 103. doi:10.15227/orgsyn.051.0103.
  8. ^ M.E. Condon; et al. (1978). "Nondepressant β-adrenergic blocking agents. 1. Substituted 3-amino-1-(5,6,7,8-tetrahydro-1-naphthoxy)-2-propanols". Journal of Medicinal Chemistry (in German). 21 (9): 913–922. doi:10.1021/jm00207a014. PMID 31485.
  9. ^ DE 2258995, F.R. Hauck, C.M. Cimarusti, V.L. Narayan, "2,3-cis-1,2,3,4-Tetrahydro-5[2-hydroxy-3-(tert.-butylamino)-propoxy]-2,3-naphthalindiol", published 1973-06-07, assigned to E.R. Squibb & Sons, Inc. 
  10. ^ K. Vukics; T. Fodor; J. Fischer; I. Fellevári; S. Lévai (2002), "Improved industrial synthesis of antidepressant Sertraline", Org. Process Res. Dev. (in German), vol. 6, no. 1, pp. 82–85, doi:10.1021/op0100549
  11. ^ B.N. Roy; G.P. Singh; P.S. Lathi; M.K. Agarwal (2013). "A novel process for synthesis of Atovaquone" (PDF). Indian J. Chem. (in German). 52B: 1299–1312. Archived from the original (PDF) on 30 May 2022.
  12. ^ C. Kaiser; T. Jen; E. Garvey; W.D. Bowen; D.F. Colella; J.R. Wardell Jr. (1977). "Adrenergic agents. 4. Substituted phenoxypropanolamine derivatives as potential β-adrenergic agonists". Journal of Medicinal Chemistry (in German). 20 (5): 687–689. doi:10.1021/jm00215a014. PMID 16136.
  13. ^ Meeker, John D.; Ryan, Louise; Barr, Dana B.; Hauser, Russ (January 2006). "Exposure to Nonpersistent Insecticides and Male Reproductive Hormones". Epidemiology. 17 (1): 61–68. doi:10.1097/01.ede.0000190602.14691.70. PMID 16357596. S2CID 24829926.
edit