South African Class 6G 4-6-0

This article is about one of several different Cape Government Railways locomotive types to be designated "6th Class". For the others, see Cape Government Railways 6th Class locomotives.

The South African Railways Class 6G 4-6-0 of 1901 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

CGR 6th Class 4-6-0 1901 Schenectady South African Class 6G 4-6-0
Ex CGR 6th Class no. 263, SAR Class 6G no. 607
Type and origin Power type Steam Designer Cape Government Railways Schenectady Locomotive Works Builder Schenectady Locomotive Works Serial number 5646-5653 Model CGR 6th Class Build date 1901 Total produced 8
Specifications Configuration: ​  • Whyte 4-6-0 (Tenwheeler)  • UIC 2'Cn2 Driver 2nd coupled axle Gauge 3 ft 6 in (1,067 mm) Cape gauge Leading dia. 28+1⁄2 in (724 mm) Coupled dia. 54 in (1,372 mm) Tender wheels 33+1⁄2 in (851 mm) as built 34 in (864 mm) retyred Wheelbase 44 ft 11+3⁄4 in (13,710 mm) ​  • Axle spacing (Asymmetrical) 1-2: 4 ft 9 in (1,448 mm) 2-3: 6 ft 7 in (2,007 mm)  • Engine 21 ft 2 in (6,452 mm)  • Leading 6 ft (1,829 mm)  • Coupled 11 ft 4 in (3,454 mm)  • Tender 14 ft 5 in (4,394 mm)  • Tender bogie 5 ft (1,524 mm) Length: ​  • Over couplers 51 ft 5+3⁄4 in (15,691 mm) Height 12 ft 8 in (3,861 mm) Frame type Bar Axle load 12 LT 15 cwt (12,950 kg) ​  • Leading 12 LT (12,190 kg)  • 1st coupled 11 LT 9 cwt 2 qtr (11,660 kg)  • 2nd coupled 12 LT 15 cwt (12,950 kg)  • 3rd coupled 12 LT 6 cwt (12,500 kg)  • Tender bogie Bogie 1: 15 LT 16 cwt (16,050 kg) Bogie 2: 17 LT 6 cwt (17,580 kg)  • Tender axle 8 LT 13 cwt (8,789 kg) Adhesive weight 36 LT 10 cwt 2 qtr (37,110 kg) Loco weight 48 LT 10 cwt 2 qtr (49,300 kg) Tender weight 33 LT 2 cwt (33,630 kg) Total weight 81 LT 12 cwt 2 qtr (82,930 kg) Tender type WE (2-axle bogies) WE, WG permitted Fuel type Coal Fuel capacity 5 LT (5.1 t) Water cap. 2,800 imp gal (12,700 L) Firebox: ​  • Type Round-top  • Grate area 18.6 sq ft (1.73 m2) Boiler: ​  • Pitch 6 ft 11 in (2,108 mm)  • Diameter 4 ft 11 in (1,499 mm)  • Tube plates 11 ft 4+3⁄4 in (3,473 mm)  • Small tubes 195: 2 in (51 mm) Boiler pressure 180 psi (1,241 kPa) Safety valve Ramsbottom 3 in (76 mm) Heating surface: ​  • Firebox 111.5 sq ft (10.36 m2)  • Tubes 1,155 sq ft (107.3 m2)  • Total surface 1,266.5 sq ft (117.66 m2) Cylinders Two Cylinder size 17+1⁄2 in (444 mm) bore 26 in (660 mm) stroke Valve gear Stephenson Valve type Richardson balanced slide Valve travel 5 in (127 mm) Valve lap 1 in (25 mm) Loco brake Steam Train brakes Vacuum Couplers Johnston link-and-pin AAR knuckle (1930s)
Performance figures Tractive effort 19,910 lbf (88.6 kN) @ 75%
Career Operators Cape Government Railways South African Railways Class CGR 6th Class, SAR Class 6G Number in class 8 Numbers CGR 262-269 SAR 606-613 Delivered 1901 First run 1901 Withdrawn 1961
The 2nd coupled axle had flangeless wheels

In 1901, eight redesigned 6th Class 4-6-0 steam locomotives were placed in service by the Cape Government Railways. In 1912, when they were assimilated into the South African Railways, they were renumbered and designated Class 6G.

Manufacturer

The original Cape 6th Class locomotive was designed at the Salt River works of the Cape Government Railways (CGR) in 1893, at the same time as the 7th Class.

Three new versions of the 6th Class locomotive entered service on the CGR in 1901, two American-built and one British-built. Of the two American-built versions, one was designed and built by the Schenectady Locomotive Works to the specifications of the CGR locomotive department. They were consequently somewhat different in appearance from the earlier Cape 6th Class locomotives. Eight locomotives were built and delivered, numbered in the range from 262 to 269 and allocated to the Western System.

Characteristics

While these engines were also built on bar frames like the previous two 6th Class versions, they were slightly larger, with larger boilers and with 17+1⁄2 inches (444 millimetres) diameter cylinders compared to the 17 inches (432 millimetres) diameter cylinders of all earlier 6th Class locomotives. Like the two Class 6F locomotives, a visually obvious distinguishing feature was their higher mounted running boards without the need for coupled wheel fairings.

The locomotive was equipped with Richardson balanced slide valves. The boiler barrel and the outside of the firebox were of Coatesville steel. The boiler feed was by two Cape pattern Gresham & Craven's no. 8 injectors, while the engine used Gresham & Craven's patent sanding gear and a Nathan no. 8 double sight feed cylinder lubricator. It had steam brakes on two pairs of coupled wheels, while the Type WE tender was equipped with a vacuum brake for itself and the train. The whistles were one 3 inches (76 millimetres) and one 4 inches (102 millimetres) Star Chime no. 3 types.

The firebox was 95 inches (2,413 millimetres) long, 28+1⁄2 inches (724 millimetres) wide, 62+1⁄2 inches (1,588 millimetres) deep in front and 48+1⁄2 inches (1,232 millimetres) deep at the back. The firebox itself was of copper, with a rocking style firegrate and a hopper-type ash pan.

The smokebox was equipped with openings on its sides near the front, with covers which each had a handle by which it could be opened with a half turn to give direct access to the inside of the smokebox. This was most likely to facilitate cleaning of the spark arrestor screens to overcome clogging without having to open the smokebox door.

Class 6 sub-classes

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.

When these eight locomotives were assimilated into the South African Railways (SAR) in 1912, they were renumbered in the range from 606 to 613 and designated Class 6G.

The rest of the CGR’s 6th Class locomotives, together with 6th Class locomotives which had been inherited from the Oranje-Vrijstaat Gouwerment-Spoorwegen (OVGS) via the Imperial Military Railways (IMR) and the Central South African Railways (CSAR), were grouped into thirteen more sub-classes by the SAR. The 4-6-0 locomotives became SAR Classes 6, 6A to 6F, 6H and 6J to 6L, the 2-6-2 locomotives became Class 6Y and the 2-6-4 locomotives became Class 6Z.

Service

The Class 6 series of locomotives were introduced primarily as passenger locomotives, but when the class became displaced by larger and more powerful locomotive classes, it literally became a Jack-of-all-trades. It went on to see service in all parts of the country, except in Natal, and was used on all types of traffic.

The Class 6G remained in service for sixty years, the last one being withdrawn from service at East London in 1961.

Illustration

• 
  Schenectady works picture of the Class 6G