Chi (unit)

(Redirected from Chek (unit))

The chi (Tongyong Pinyin chih) is a traditional Chinese unit of length. Although it is often translated as the "Chinese foot", its length was originally derived from the distance measured by a human hand, from the tip of the thumb to the tip of the forefinger, and is similar to the ancient span. It first appeared during China's Shang dynasty approximately 3,000 years ago and has since been adopted by other East Asian cultures such as Japan (shaku), Korea (ja/cheok), and Vietnam (thước). Its present value is standardized at around one-third metre (1 ft 1 in), although the exact standards vary among the mainland of the People's Republic of China, its special administrative region of Hong Kong, and Taiwan.

Chi
Chinese name
Chinese
Transcriptions
Standard Mandarin
Hanyu Pinyinchǐ
Bopomofoㄔˇ
Wade–Gilesch'ih3
Tongyong Pinyinchǐh
Yue: Cantonese
Yale Romanizationchek
Jyutpingcek3
Japanese name
Kanji
Kanaしゃく
Transcriptions
Revised Hepburnshaku
Korean name
Hangul
Hanjan/a
Transcriptions
Revised Romanizationja
McCune–Reischauercha
Alternative Korean name
Hangul
Hanja
Transcriptions
Revised Romanizationcheok
McCune–Reischauerch'ŏk
Chi (China)
Wooden ruler of the western Han dynasty, unearthed at Jinguan Pass Site in Jinta County
General information
Unit systemtraditional Chinese unit
Unit oflength
Conversions
1 chi (china) in ...... is equal to ...
   metric (SI) units   1/3 m
~333.3 mm
   imperial/US units   ~13.123 in
Chek (Hong Kong)
a section of an old Hong Kong ruler, showing the last (10th) cun of a chi. One can see that the chi in that jurisdiction was exactly equal to ⁠14+5/8 of an inch. A metric ruler is shown next to it for comparison
General information
Unit systemtraditional Chinese unit
Unit oflength
Conversions
1 chek (hong kong) in ...... is equal to ...
   metric (SI) units   371.475 mm
   imperial/US units   ⁠14+5/8 in
Chi (Taiwan)
Unit systemtraditional Taiwan unit
Unit oflength
Conversions
1 chi (taiwan) in ...... is equal to ...
   metric (SI) units   1033 m
~303.0 mm
   imperial/US units   ~11.930 in

In its ancient and modern forms, the chi is divided into 10 smaller units known as cun (the "Chinese inch"). 10 chi are equal to 1 zhàng.[1]

Modern values

edit

In the People's Republic of China, since 1984, the chi has been defined as exactly 1/3 of a metre, i.e., 33+13 cm (13.1 in). However, in the Hong Kong SAR the corresponding unit, pronounced tsek (cek3) in Cantonese, is defined as exactly 0.371475 m (1 ft 2.6250 in) or 1 7/32 ft.[2] The two units are sometimes referred to in English as "Chinese foot" and "Hong Kong foot".

In Taiwan, chi is the same as the Japanese shaku, i.e., 1033 metre (11.93 in).[citation needed]

Historical values

edit

The study of ancient rulers and other artifacts whose size in the contemporary chi was known allowed modern researchers to surmise that during the 2nd century BC to 3rd century AD the (Qin dynasty to Han dynasty to the Three Kingdoms period), the value of the chi varied between 23.1 and 24.3 cm (9.1 and 9.6 in).[3] Even earlier, during the Warring States era, the value of chi was essentially the same.[4]

It is thought that the ancient Chinese astronomers also used chi as an angular unit; modern analysis of historical records indicates that it may have been equal to one degree.[5]

In the 19th century, the value of the chi, depending on the part of the country and the application, varied between 31 and 36 cm (12 and 14 in). According to an 1864 British report, in most of China the chi used by engineers in public works was equal to 12.71 inches (32.3 cm), the surveyors' chi was 12.058 inches (30.63 cm), while the value generally used for measuring distances was 12.17 inches (30.9 cm). In Guangzhou, however, the chi used for local trade varied from 14.625 to 14.81 inches (37.15 to 37.62 cm) – i.e., very close to the modern chek. The value fixed by a Sino-British treaty for the purposes of customs duties in Hong Kong was 14.1 inches (36 cm).[6]

Usage in Chinese language

edit

Due to its long history and its widespread usage, chi (along with cun) has also seen metaphorical usages in the Chinese language. For example, chi cun (Chinese: 尺寸), a word made up of the units chi and cun, refers to the dimensions of an object, while the idiom "dé cùn jìn chǐ" (simplified Chinese: 得寸进尺; traditional Chinese: 得寸進尺; lit. 'gaining a cun and asking for a chi') means "extremely greedy".

In informal use in China, chi is also sometimes used to refer to the United States customary foot or British imperial foot.

References

edit
  1. ^ Shuowen Jiezi (説文解字), "尺,所以指尺䂓榘事也。" East Asian usually makes spanning with his/her thumb and forefinger, instead of pinkie.
  2. ^ Cap. 68A WEIGHTS AND MEASURES ORDER ─ SCHEDULE WEIGHTS AND MEASURES CONVERSION TABLE (Hong Kong e-Legislation)
  3. ^ Shen, Kangshen; Crossley, John N.; Lun, Anthony Wah-Cheung; Liu, Hui (1999). The nine chapters on the mathematical art: companion and commentary. Oxford University Press. p. 8. ISBN 0-19-853936-3.
  4. ^ Ssu-Ma, Ch'ien (2008), The Grand Scribe's Records: The Memoirs of Han China, Part 1. Volume 8 of The Grand Scribe's Records, Indiana University Press, pp. xliv–xlv, ISBN 978-0-253-34028-3
  5. ^ Liu, C. Y. (1987). "A Research on the Implication of Zhang-Chi in Ancient Chinese Astronomical Records". Acta Astronomica Sinica. 28 (4): 402. Bibcode:1987AcASn..28..397L.
  6. ^ Carrington, Robert C. (1864). Foreign measures and their English values. Potter. p. 22.
edit

See also

edit