The Chorleywood bread process (CBP) is a method of efficient dough production to make yeasted bread quickly, producing a soft, fluffy loaf. Compared to traditional bread-making processes, CBP uses more yeast, added fats, chemicals, and high-speed mixing to allow the dough to be made with lower-protein wheat, and produces bread in a shorter time. It was developed by Bill Collins, George Elton and Norman Chamberlain of the British Baking Industries Research Association at Chorleywood in 1961. As of 2009[update], 80% of bread made in the United Kingdom used the process.[1]
For millennia, bread had been made from wheat flour by manually kneading dough with a raising agent (typically yeast) leaving it to ferment before it was baked. In 1862 a cheaper industrial-scale process was developed by John Dauglish, using water with dissolved carbon dioxide instead of yeast. Dauglish's method, used by the Aerated Bread Company that he set up, dominated commercial bread baking for a century until the yeast-based Chorleywood process was developed.[citation needed]
Some protein is lost during traditional bulk fermentation of bread; this does not occur to the same degree in mechanically developed doughs, allowing CBP to use lower-protein wheat.[2][3] This feature had an important impact in the United Kingdom where, at the time, few domestic wheat varieties were of sufficient quality to make high-quality bread; the CBP permitted a much greater proportion of lower-protein domestic wheat to be used in the grist.[4]
Description
editThe Chorleywood bread process allows the use of lower-protein wheats and reduces processing time,[5] the system being able to produce a loaf of bread from flour to sliced and packaged form in about three and a half hours. This is achieved through the addition of vitamin C, fat, yeast, and intense mechanical working by high-speed mixers, not feasible in a small-scale kitchen.
Flour, water, yeast, salt, and fat (if used) are mixed together, along with minor ingredients common to many bread-making techniques, such as vitamin C, emulsifiers and enzymes. The dough is then mechanically mixed for about three minutes. The high-shear mixing generates high temperatures in the dough, which is cooled in some advanced mixers using a cooling jacket. Chilled water or ice may also be used to counteract the temperature rise during high-speed mixing. Air pressure in the mixer headspace can be controlled to keep gas bubbles at the desired size and number. Typical operating regimes are pressure followed by vacuum, and atmospheric followed by vacuum. The pressure control during mixing affects the fineness of crumb texture in the finished bread.
In typical high-volume bread-production, the dough is cut into individual pieces and allowed to "recover" for 5–8 minutes (intermediate proofing). Each piece of dough is then shaped, placed in a baking tin and moved to the humidity- and temperature-controlled proofing chamber, where it sits for about 45–50 minutes. It is then baked for 17–25 minutes at 450 °F (about 230 °C). After baking, the loaves are removed from the baking tin and then go to the cooler, where, about two hours later, they are made ready for despatch, sliced and packaged if required.[6] In UK-standard bread, the dough piece is "cross-panned" at the moulding stage; this involves cutting the dough piece into four and turning each piece by 90° before placing it in the baking tin. Cross-panned bread appears to have a finer and whiter crumb texture than the elliptical shape of the crumb bubble structure resulting from a different orientation,[clarification needed] is easier to slice, and tends to be more resistant to tearing when spreading products such as butter on the surface.
As of 2009[update], 80% of bread made in the United Kingdom, Australia, New Zealand, and India, used the process. Many smaller bakers use the CBP to mix their dough which they then process by hand.[citation needed]
Since the introduction of the process, many UK domestic wheat varieties have been improved. Flour suitable for traditional high-quality pan bread (12–13.5% protein) can now be sourced in the United Kingdom. Before the development of the CBP, UK bread was reliant on imported wheat, particularly from North America.[citation needed]
Criticism
editOver the past decade, there has been a significant shift in the UK bread market, characterized by a growing preference for artisan and "posh" breads over the traditional Chorleywood Process white sliced loaf. Artisan bakeries have expanded, offering breads that are increasingly popular despite their higher prices. This trend reflects a broader consumer desire for healthier and tastier bread options, even in economic downturns. While the traditional white sliced loaf remains popular, its sales have been declining, and the market has diversified with a wide variety of bread types, indicating a move away from the uniformity of Chorleywood Process bread.[7]
References
edit- ^ Morris, Chris (1 November 2011). "Chorleywood Bread Process". Campden BRI. Archived from the original on 4 October 2011.
The CBP is responsible for over 80% of the bread produced in the UK and is used in every corner of the world. This course will be focusing on all the principles of CBP production from choice of ingredient to the theory behind the mechanical development of the dough. Delegates will go away with a full understanding of the process and how to obtain the best results for their breads.
- ^ Fox, Brian A.; Cameron, Allan G. (1978). Food Science — A Chemical approach. Hodder & Soughton Educational. ISBN 0-340-20962-3.
- ^ Brennan, James (2006). Food Processing Handbook. Wiley-VCH. p. 239. ISBN 3-527-30719-2.
- ^ "History of bread – 20th century". The Federation of Bakers. Archived from the original on 11 July 2007. Retrieved 20 July 2007.
- ^ "Chorleywood: The bread that changed Britain". bbc.com. 7 June 2011. Retrieved 25 July 2023.
- ^ Czapp, Katherine (16 July 2006). "Against the Grain". The Weston A. Price Foundation. Retrieved 16 January 2018.
- ^ "A tale of two breads". BBC News. 28 November 2012. Retrieved 25 July 2024.