DECSYSTEM-20

(Redirected from DEC-20)

The DECSYSTEM-20 was a family of 36-bit Digital Equipment Corporation PDP-10 mainframe computers running the TOPS-20 operating system and was introduced in 1977.

DECSYSTEM-20
DECSYSTEM-20 KL-10 (1974) at the Living Computer Museum
Also known asPDP-20
DeveloperDigital Equipment Corporation
Product familyProgrammed Data Processor
TypeMainframe computer
Release date1977; 47 years ago (1977)
Operating systemTOPS-20
PlatformDEC 36-bit
RelatedPDP-10
DECSYSTEM-2020 front panel
2 DECSYSTEM-2020 KS-10s (1979) at the Living Computer Museum

PDP-10 computers running the TOPS-10 operating system were labeled DECsystem-10 as a way of differentiating them from the PDP-11. Later on, those systems running TOPS-20 (on the KL10 PDP-10 processors) were labeled DECSYSTEM-20 (the block capitals being the result of a lawsuit brought against DEC by Singer,[citation needed] which once made a computer called "The System Ten").[1] The DECSYSTEM-20 was sometimes called PDP-20, although this designation was never used by DEC.

Models

edit

The following models were produced:

  • DECSYSTEM-2020: KS10 bit-slice processor with up to 512 kilowords of solid state RAM (The ADP OnSite version of the DECSYSTEM-2020 supported 1 MW of RAM)
  • DECSYSTEM-2040: KL10 ECL processor with up to 1024 kilowords of magnetic core RAM
  • DECSYSTEM-2050: KL10 ECL processor with 2k words of cache and up to 1024 kilowords of RAM
  • DECSYSTEM-2060: KL10 ECL processor with 2k words of cache and up to 4096 kilowords of solid state memory
  • DECSYSTEM-2065: DECSYSTEM-2060 with MCA25 pager (double-sized (1024 entry) two-way associative hardware page table)
 
Introduction and Reference Card for the DECSYSTEM-20 at Columbia University, 1980. The DECSYSTEM-20 was the mainstay of computing at Columbia from 1977 through 1988.[2]

The only significant difference the user could see between a DECsystem-10 and a DECSYSTEM-20 was the operating system and the color of the paint. Most (but not all) machines sold to run TOPS-10 were painted "Blasi Blue",[3] whereas most TOPS-20 machines were painted "Terracotta" (often mistakenly called "Chinese Red" or orange; the actual name of the color on the paint cans was Terra Cotta[3]).

There were some significant internal differences between the earlier KL10 Model A processors, used in the earlier DECsystem-10s running on KL10 processors, and the later KL10 Model Bs, used for the DECSYSTEM-20s. Model As used the original PDP-10 memory bus, with external memory modules. The later Model B processors used in the DECSYSTEM-20 used internal memory, mounted in the same cabinet as the CPU. The Model As also had different packaging; they came in the original tall PDP-10 cabinets, rather than the short ones used later on for the DECSYSTEM-20.

The last released implementation of DEC's 36-bit architecture was the single cabinet DECSYSTEM-2020, using a KS10 processor.

The DECSYSTEM-20 was primarily designed and used as a small mainframe for timesharing. That is, multiple users would concurrently log on to individual user accounts and share use of the main processor to compile and run applications. Separate disk allocations were maintained for all users by the operating system, and various levels of protection could be maintained by for System, Owner, Group, and World users. A model 2060, for example, could typically host up to 40 to 60 simultaneous users before exhibiting noticeably delayed response time.

Remaining machines

edit

The Living Computer Museum of Seattle, Washington, maintained a 2065 running TOPS-10, which was available to interested parties via SSH upon registration (at no cost) at their website.

References

edit
  1. ^ "Singer System 10". Computerworld. March 21, 1977. p. 75.
  2. ^ da Cruz, Frank. "Columbia University DECSYSTEM-20". Columbia University Computing History. Columbia University. Retrieved November 13, 2022.
  3. ^ a b North, Don (November 21, 2006). "Re: dec cabinet paint (and/was "11/34 done")". classiccmp (Mailing list).

Further reading

edit
edit