In chemistry, dehydrogenation is a chemical reaction that involves the removal of hydrogen, usually from an organic molecule. It is the reverse of hydrogenation. Dehydrogenation is important, both as a useful reaction and a serious problem. At its simplest, it's a useful way of converting alkanes, which are relatively inert and thus low-valued, to olefins, which are reactive and thus more valuable. Alkenes are precursors to aldehydes (R−CH=O), alcohols (R−OH), polymers, and aromatics.[1] As a problematic reaction, the fouling and inactivation of many catalysts arises via coking, which is the dehydrogenative polymerization of organic substrates.[2]
Enzymes that catalyze dehydrogenation are called dehydrogenases.
In metal manufacturing and repairs, dehydrogenation is a thermal treatment which consists in removing the hydrogen absorbed by an object during an electrochemical or chemical process, performed in a specific oven at a temperature of 180–200 °C (360–390 °F) for a minimum time of 2 hours.[citation needed]
Heterogeneous catalytic routes
editStyrene
editDehydrogenation processes are used extensively to produce aromatics in the petrochemical industry. Such processes are highly endothermic and require temperatures of 500 °C and above.[1][3] Dehydrogenation also converts saturated fats to unsaturated fats. One of the largest scale dehydrogenation reactions is the production of styrene by dehydrogenation of ethylbenzene. Typical dehydrogenation catalysts are based on iron(III) oxide, promoted by several percent potassium oxide or potassium carbonate.[4]
- C6H5CH2CH3 → C6H5CH=CH2 + H2
Other alkenes
editThe cracking processes especially fluid catalytic cracking and steam cracker produce high-purity mono-olefins from paraffins. Typical operating conditions use chromium (III) oxide catalyst at 500 °C. Target products are propylene, butenes, and isopentane, etc. These simple compounds are important raw materials for the synthesis of polymers and gasoline additives.[citation needed]
Oxidative dehydrogenation
editRelative to thermal cracking of alkanes, oxidative dehydrogenation (ODH) is of interest for two reasons: (1) undesired reactions take place at high temperature leading to coking and catalyst deactivation, making frequent regeneration of the catalyst unavoidable, (2) thermal dehydrogenation is expensive as it requires a large amount of heat. Oxidative dehydrogenation (ODH) of n-butane is an alternative to classical dehydrogenation, steam cracking and fluid catalytic cracking processes.[5][6]
Formaldehyde is produced industrially by oxidative dehydrogenation of methanol. This reaction can also be viewed as a dehydrogenation using O2 as the acceptor. The most common catalysts are silver metal, iron(III) oxide,[7] iron molybdenum oxides [e.g. iron(III) molybdate] with a molybdenum-enriched surface,[8] or vanadium oxides. In the commonly used formox process, methanol and oxygen react at ca. 250–400 °C (480–750 °F) in the presence of iron oxide in combination with molybdenum and/or vanadium to produce formaldehyde according to the chemical equation:[9]
- CH3OH + O2 → 2 CH2O + 2 H2O
Homogeneous catalytic routes
editA variety of dehydrogenation processes have been described for organic compounds. These dehydrogenation is of interest in the synthesis of fine organic chemicals.[10] Such reactions often rely on transition metal catalysts.[11][12] Dehydrogenation of unfunctionalized alkanes can be effected by homogeneous catalysis. Especially active for this reaction are pincer complexes.[13][14]
Stoichiometric processes
editDehydrogenation of amines to nitriles can be accomplished using a variety of reagents, such as iodine pentafluoride (IF
5).[citation needed]
In typical aromatization, six-membered alicyclic rings, e.g. cyclohexene, can be aromatized in the presence of hydrogenation acceptors. The elements sulfur and selenium promote this process. On the laboratory scale, quinones, especially 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) are effective.[citation needed]
Main group hydrides
edit
The dehydrogenative coupling of silanes has also been developed.[15]
- n PhSiH3 → [PhSiH]n + n H2
The dehydrogenation of amine-boranes is related reaction. This process once gained interests for its potential for hydrogen storage.[16]
References
edit- ^ a b Wittcoff, Harold A.; Reuben, Bryan G.; Plotkin, Jeffrey S. (2004). Industrial Organic Chemicals, Second Edition - Wittcoff - Wiley Online Library. doi:10.1002/0471651540. ISBN 9780471651543.
- ^ Guisnet, M.; Magnoux, P. (2001). "Organic chemistry of coke formation". Applied Catalysis A: General. 212 (1–2): 83–96. doi:10.1016/S0926-860X(00)00845-0.
- ^ Survey of Industrial Chemistry | Philip J. Chenier | Springer. ISBN 9780471651543.
- ^ Denis H. James William M. Castor, "Styrene" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005.
- ^ Ajayi, B. P.; Jermy, B. Rabindran; Ogunronbi, K. E.; Abussaud, B. A.; Al-Khattaf, S. (2013-04-15). "n-Butane dehydrogenation over mono and bimetallic MCM-41 catalysts under oxygen free atmosphere". Catalysis Today. Challenges in Nanoporous and Layered Materials for Catalysis. 204: 189–196. doi:10.1016/j.cattod.2012.07.013.
- ^ Polypropylene Production via Propane Dehydrogenation part 2, Technology Economics Program. by Intratec. 2012. ISBN 978-0615702162.
- ^ Wang, Chien-Tsung; Ro, Shih-Hung (2005-05-10). "Nanocluster iron oxide-silica aerogel catalysts for methanol partial oxidation". Applied Catalysis A: General. 285 (1): 196–204. doi:10.1016/j.apcata.2005.02.029. ISSN 0926-860X.
- ^ Dias, Ana Paula Soares; Montemor, Fátima; Portela, Manuel Farinha; Kiennemann, Alain (2015-02-01). "The role of the suprastoichiometric molybdenum during methanol to formaldehyde oxidation over Mo–Fe mixed oxides". Journal of Molecular Catalysis A: Chemical. 397: 93–98. doi:10.1016/j.molcata.2014.10.022. ISSN 1381-1169.
- ^ Reuss, Günther; Disteldorf, Walter; Gamer, Armin Otto; Hilt, Albrecht (2000). "Formaldehyde". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a11_619. ISBN 3-527-30673-0.
- ^ Yeung, Charles S.; Dong, Vy M. (2011). "Catalytic Dehydrogenative Cross-Coupling: Forming Carbon−Carbon Bonds by Oxidizing Two Carbon−Hydrogen Bonds". Chemical Reviews. 111 (3): 1215–1292. doi:10.1021/cr100280d. PMID 21391561.
- ^ Dobereiner, Graham E.; Crabtree, Robert H. (2010). "Dehydrogenation as a Substrate-Activating Strategy in Homogeneous Transition-Metal Catalysis". Chemical Reviews. 110 (2): 681–703. doi:10.1021/cr900202j. PMID 19938813.
- ^ Choi, Jongwook; MacArthur, Amy H. Roy; Brookhart, Maurice; Goldman, Alan S. (2011). "Dehydrogenation and Related Reactions Catalyzed by Iridium Pincer Complexes". Chemical Reviews. 111 (3): 1761–1779. doi:10.1021/cr1003503. PMID 21391566.
- ^ "1". Alkane C-H Activation by Single-Site Metal Catalysis | Pedro J. Pérez | Springer. pp. 1–15.
- ^ Findlater, Michael; Choi, Jongwook; Goldman, Alan S.; Brookhart, Maurice (2012-01-01). Pérez, Pedro J. (ed.). Alkane C-H Activation by Single-Site Metal Catalysis. Catalysis by Metal Complexes. Springer Netherlands. pp. 113–141. doi:10.1007/978-90-481-3698-8_4. ISBN 9789048136971.
- ^ Aitken, C.; Harrod, J. F.; Gill, U. S. (1987). "Structural studies of oligosilanes produced by catalytic dehydrogenative coupling of primary organosilanes". Can. J. Chem. 65 (8): 1804–1809. doi:10.1139/v87-303.
- ^ Staubitz, Anne; Robertson, Alasdair P. M.; Manners, Ian (2010). "Ammonia-Borane and Related Compounds as Dihydrogen Sources". Chemical Reviews. 110 (7): 4079–4124. doi:10.1021/cr100088b. PMID 20672860.