Stylus (computing)

(Redirected from Digital stylus)

In computing, a stylus (or stylus pen) is a small pen-shaped instrument whose tip position on a computer monitor can be detected. It is used to draw, or make selections by tapping. While devices with touchscreens such as laptops, smartphones, game consoles,[1] and graphics tablets[2] can usually be operated with a fingertip, a stylus can provide more accurate and controllable input.[3]

several styluses; (l to r) PalmPilot Professional, Fossil Wrist PDA, Nokia 770, Audiovox XV6600, HP Jornada 520, Sharp Zaurus 5500, Fujitsu Lifebook P-1032

History

edit

The earliest computer-related usage for a stylus was in 1643 with Pascal's calculator.[4] The device had rotary dials that rotated in accordance with the selected numbers; with gears, drums, and clever engineering, it was capable of addition, subtraction, multiplication and division (using 9's constant). A stylus was used to turn the dials.

Later devices of this type include the Arithmometer, in the 1860s; and the Addiator, in 1920.[5] The Addiator was a pocket mechanical adding machine that used a stylus to move tiny rigid slices of sheet-metal that were enclosed in a case. On the side of a slice of metal there were numbers that became visible to display the result. It was capable of addition, subtraction, multiplication and division. In 1967 there was a HEXADAT model,[6] which allowed 4-function math to be applied to hexadecimal numbers for use in programming. The first use of a stylus in an electronic computing device was the Stylator, demonstrated by Tom Dimond in 1957.[7][8]

Types

edit

Capacitive

edit

Capacitive (also called passive) styluses emulate a finger by using a tip made of rubber or conductive foam; or metal such as copper. They do not need to be powered and can be used on any multi-touch surface that a finger can be used, typically capacitive screens that are common in smart phones and tablet computers. Stylus tips made of rubber or foam are often large, making it rather difficult to get precise notes or drawings.

Capacitive styluses work by distorting the screen’s electrostatic field.[9] Screens that receive input from a capacitive stylus (as well as human fingers) can't register pressure applied by the pen; tilting of the pen; and can't distinguish between a capacitive stylus, your finger, or a resting palm as input - it will register all of these touches as marks on the screen.

Capacitive styluses are made of a conductive material (typically as a metal rod or barrel) to transmit electrical charge between the hand and a rubber[10] or metal tip such as copper. Being free of any digital components, capacitive styluses can be cost effective to manufacture. DIY capacitive styluses can also be made with materials found at home.[11]

Capacitive screens are very widely used on smart phones and multi-touch surfaces, where simultaneous use of several fingers is detected.[12] Capacitive styluses tend to work on any multi-touch surface that accepts input from a finger.

Active

edit

Active (also called digital[2]) styluses include digital components or circuitry inside the pen that communicates with a digitizer on the touch device. This communication allows for advanced features such as pressure sensitivity, tilt, programmable buttons, palm detection, eraser tips, memorizing settings, and writing data transmission. In order for an active stylus to function, its digital component protocol must match the digitizer technology it is interacting with. Active styluses are powered by a removable or chargeable battery, or operate passively by inductance.

Active styluses use different protocols by different manufacturers in order to communicate with the digitizer of a graphic tablet or multi-touch device. The digital protocol of the pen must match the device digitizer, otherwise input from the pen will not register on the device.

Resistive

edit

A resistive stylus works by applying pressure to the screen, causing two layers (a conductive and a resistive layer) to make contact. This registers as a touch input.[citation needed]

edit

See also

edit

References

edit
  1. ^ "Giz Explains: The Magic Behind Touchscreens". Gizmodo. 13 August 2008. Archived from the original on 26 November 2009. Retrieved 3 November 2009.
  2. ^ a b Shelly, Gary B.; Misty E. Vermaat (2009). Discovering Computers: Fundamentals. Cengage Learning. ISBN 978-0-495-80638-7. Archived from the original on 15 February 2017. Retrieved 3 November 2009.
  3. ^ Charles Arthur (20 October 2009). "Windows Mobile: where's the love? And where's the sales figure?". The Guardian. London. Archived from the original on 11 October 2016.
  4. ^ "CNUM - 8KU54-2.5 : P.245 - im.249".
  5. ^ "Addiator - Rechnerlexikon".
  6. ^ "Addiator Hexadat - Rechnerlexikon".
  7. ^ Dimond, Tom (1957-12-01). "Devices for reading handwritten characters". Proceedings of Eastern Joint Computer Conference. pp. 232–237. Archived from the original on 2008-07-05. Retrieved 2008-08-23.
  8. ^ Dimond, T. L. (1958). "Devices for Reading Handwritten Characters". December 9–13, 1957 Eastern Joint Computer Conference: Computers with Deadlines to Meet. Association for Computing Machinery: 232–237. doi:10.1145/1457720.1457765. S2CID 17961928.
  9. ^ Kazmeyer, Milton (September 28, 2018). "How Does a Stylus Pen Work?". Techwalla. Retrieved June 1, 2020.
  10. ^ "The Science Behind Capacitive Styluses". Nelson-Miller, Inc. 2019-07-15. Retrieved 2020-06-01.
  11. ^ Bell, Donald. "How to make a capacitive stylus (photos)". CNET. Retrieved 2020-06-01.
  12. ^ Brandon, John (15 December 2008). "The Age of Touch Computing: A Complete Guide". PC World. Archived from the original on 27 December 2017.
edit