This article needs additional citations for verification. (September 2008) |
In computer programming, digraphs and trigraphs are sequences of two and three characters, respectively, that appear in source code and, according to a programming language's specification, should be treated as if they were single characters. Trigraphs have been removed from the C++ language, and will be from C as of C23, thus likely aren't used much in practice in C already, nor in any other mainstream language (use of them in the language J is an exception). In the modern world of Unicode/UTF-8 (even just with ASCII) there's no need for trigraphs in language design, which were considered a burden, and neither really digraphs, that likely have very few users, at least in those languages.
Various reasons exist for using digraphs and trigraphs: keyboards may not have keys to cover the entire character set of the language, input of special characters may be difficult, text editors may reserve some characters for special use and so on. Trigraphs might also be used for some EBCDIC code pages that lack characters such as { and }.
History
editThe basic character set of the C programming language is a subset of the ASCII character set that includes nine characters which lie outside the ISO 646 invariant character set. This can pose a problem for writing source code when the encoding (and possibly keyboard) being used does not support any of these nine characters. The ANSI C committee invented trigraphs as a way of entering source code using keyboards that support any version of the ISO 646 character set.[1]
Implementations
editTrigraphs are not commonly encountered outside compiler test suites.[2] Some compilers support an option to turn recognition of trigraphs off, or disable trigraphs by default and require an option to turn them on. Some can issue warnings when they encounter trigraphs in source files. Borland supplied a separate program, the trigraph preprocessor (TRIGRAPH.EXE), to be used only when trigraph processing is desired (the rationale was to maximise speed of compilation).
Language support
editDifferent systems define different sets of digraphs and trigraphs, as described below.
ALGOL
editEarly versions of ALGOL predated the standardized ASCII and EBCDIC character sets, and were typically implemented using a manufacturer-specific six-bit character code. A number of ALGOL operations either lacked codepoints in the available character set or were not supported by peripherals, leading to a number of substitutions including := for ← (assignment) and >= for ≥ (greater than or equal).
Pascal
editThe Pascal programming language supports digraphs (., .), (* and *) for [, ], { and } respectively. Unlike all other cases mentioned here, (* and *) were and still are in wide use. However, many compilers treat them as a different type of commenting block rather than as actual digraphs, that is, a comment started with (* cannot be closed with } and vice versa.
J
editThe J programming language is a descendant of APL but uses the ASCII character set rather than APL symbols. Because the printable range of ASCII is smaller than APL's specialized set of symbols, . (dot) and : (colon) characters are used to inflect ASCII symbols, effectively interpreting unigraphs, digraphs or rarely trigraphs as standalone "symbols".[3]
Unlike the use of digraphs and trigraphs in C and C++, there are no single-character equivalents to these in J.
C
edit| Trigraph | Equivalent |
|---|---|
??= |
#
|
??/ |
\
|
??' |
^
|
??( |
[
|
??) |
]
|
??! |
|
|
??< |
{
|
??> |
}
|
??- |
~
|
The C preprocessor (used for C and with slight differences in C++; see below) replaces all occurrences of the nine trigraph sequences in this table by their single-character equivalents before any other processing (until C23[4]).[5][6]
A programmer may want to place two question marks together yet not have the compiler treat them as introducing a trigraph. The C grammar does not permit two consecutive ? tokens, so the only places in a C file where two question marks in a row may be used are in multi-character constants, string literals, and comments. This is particularly a problem for the classic Mac OS, where the constant '????' may be used as a file type or creator.[7] To safely place two consecutive question marks within a string literal, the programmer can use string concatenation "...?""?..." or an escape sequence "...?\?...".
??? is not itself a trigraph sequence, but when followed by a character such as - it will be interpreted as ? + ??-, as in the example below which has 16 ?s before the /.
The ??/ trigraph can be used to introduce an escaped newline for line splicing; this must be taken into account for correct and efficient handling of trigraphs within the preprocessor. It can also cause surprises, particularly within comments. For example:
// Will the next line be executed????????????????/
a++;
which is a single logical comment line (used in C++ and C99), and
/??/
* A comment *??/
/
which is a correctly formed block comment. The concept can be used to check for trigraphs as in the following C99 example, where only one return statement will be executed.
int trigraphsavailable() // returns 0 or 1; language standard C99 or later
{
// are trigraphs available??/
return 0;
return 1;
}
| Digraph | Equivalent |
|---|---|
<: |
[
|
:> |
]
|
<% |
{
|
%> |
}
|
%: |
#
|
In 1994, a normative amendment to the C standard, C95,[8][9] included in C99, supplied digraphs as more readable alternatives to five of the trigraphs.
Unlike trigraphs, digraphs are handled during tokenization, and any digraph must always represent a full token by itself, or compose the token %:%: replacing the preprocessor concatenation token ##. If a digraph sequence occurs inside another token, for example a quoted string, or a character constant, it will not be replaced.
C++
edit| Token | Equivalent |
|---|---|
compl |
~
|
not |
!
|
bitand |
&
|
bitor |
|
|
and |
&&
|
or |
||
|
xor |
^
|
and_eq |
&=
|
or_eq |
|=
|
xor_eq |
^=
|
not_eq |
!=
|
C++ (through C++14, see below) behaves like C, including the C99 additions, but with additional tokens listed in the table.[10]
As a note, %:%: is treated as a single token, rather than two occurrences of %:.
In the sequence <:: if the subsequent character is neither : nor >, the < is treated as a preprocessing token by itself and not as the first character of the alternative token <:. This is done so certain uses of templates are not broken by the substitution.
The C++ Standard makes this comment with regards to the term "digraph":[11]
The term "digraph" (token consisting of two characters) is not perfectly descriptive, since one of the alternative preprocessing-tokens is
%:%:and of course several primary tokens contain two characters. Nonetheless, those alternative tokens that aren't lexical keywords are colloquially known as "digraphs".
Trigraphs were proposed for deprecation in C++0x, which was released as C++11.[12] This was opposed by IBM, speaking on behalf of itself and other users of C++,[13] and as a result trigraphs were retained in C++11. Trigraphs were then proposed again for removal (not only deprecation) in C++17.[14] This passed a committee vote, and trigraphs (but not the additional tokens) are removed from C++17 despite the opposition from IBM.[15] Existing code that uses trigraphs can be supported by translating from the source files (parsing trigraphs) to the basic source character set that does not include trigraphs.[14]
RPL
editHewlett-Packard calculators supporting the RPL language and input method provide support for a large number of trigraphs (also called TIO codes) to reliably transcribe non-seven-bit ASCII characters of the calculators' extended character set[16][17][18] on foreign platforms, and to ease keyboard input without using the CHARS application.[19][20][17][18] The first character of all TIO codes is a \, followed by two other ASCII characters vaguely resembling the glyph to be substituted.[19][20][17][18][21] All other characters can be entered using the special \nnn TIO code syntax with nnn being a three-digit decimal number (with leading zeros if necessary) of the corresponding code point (thereby formally representing a tetragraph).[19][17][18]
Application support
editVim
editThe Vim text editor supports digraphs for actual entry of text characters, following RFC 1345. The entry of digraphs is bound to Ctrl+K by default.[22] The list of all possible digraphs in Vim can be displayed by typing :dig.
GNU Screen
editGNU Screen has a digraph command, bound to Ctrl+A Ctrl+V by default.[23]
Lotus
editLotus 1-2-3 for DOS uses Alt+F1 as compose key to allow easier input of many special characters of the Lotus International Character Set (LICS)[24] and Lotus Multi-Byte Character Set (LMBCS).
See also
edit
References
edit- ^ Rationale for International Standard—Programming Languages—C (PDF). Revision 5.10. pp. 20–21.
- ^ Jones, Derek M. "Sentence 117". The New C Standard: An Economic and Cultural Commentary.
- ^ Hui, Roger. "Vocabulary". jsoftware.com. Archived from the original on 2019-04-02. Retrieved 2015-04-16.
- ^ "Removing trigraphs??!" (PDF).
- ^ British Standards Institute (2003). The C Standard - Incorporating TC1 - BS ISO/IEC 9899:1999. John Wiley & Sons. ISBN 0-470-84573-2.
- ^ "Rationale for International Standard - Programming Languages - C" (PDF). 5.10. April 2003. Archived (PDF) from the original on 2016-06-06. Retrieved 2010-10-17.
- ^ "File Basics". whitefiles.org. Retrieved 2024-05-08.
- ^ ISO/IEC 9899:1990/Amd 1:1995 - Programming languages — C — Amendment 1: C Integrity. March 1995. Retrieved 2024-05-30.
- ^ Clive D.W. Feather (2010-09-12). "A brief description of Normative Addendum 1".
- ^ Stroustrup, Bjarne (1994-03-29). Design and Evolution of C++ (1 ed.). Addison-Wesley Publishing Company. ISBN 0-201-54330-3.
- ^ Du Toit, Stefanus, ed. (2012-01-16). "Working Draft, Standard for Programming Language C++" (PDF). N3337. Archived (PDF) from the original on 2019-05-08. Retrieved 2019-05-08.
- ^ "C++0X, CD 1, National Body Comments" (PDF). 2009-01-30. SC22/WG21 N2837 comment UK 11. Archived (PDF) from the original on 2017-08-01. Retrieved 2019-05-12.
- ^ Wong, Michael; Tong, Hubert; Klarer, Robert; McIntosh, Ian; Mak, Raymond; Cambly, Christopher; LaBonté, Alain (2009-06-19). "Comment on Proposed Trigraph Deprecation" (PDF). N2910. Archived (PDF) from the original on 2017-08-01. Retrieved 2019-05-12.
- ^ a b Smith, Richard (2014-05-06). "Removing trigraphs??!". N3981. Archived from the original on 2018-07-09. Retrieved 2019-05-12.
- ^ Wong, Michael; Tong, Hubert; Bhakta, Rajan; Inglis, Derek (2014-10-10). "IBM comment on preparing for a Trigraph-adverse future in C++17" (PDF). IBM paper N4210. Archived (PDF) from the original on 2018-09-11. Retrieved 2019-05-12.
- ^ HP 82240B Infrared Printer (1 ed.). Corvallis, OR, USA: Hewlett-Packard. August 1989. HP reorder number 82240-90014.
- ^ a b c d HP 48G Series – User's Guide (UG) (8 ed.). Hewlett-Packard. December 1994 [1993]. pp. 2–5, 27–16. HP 00048-90126, (00048-90104). Archived from the original on 2016-08-06. Retrieved 2015-09-06. [1]
- ^ a b c d HP 50g / 49g+ / 48gII graphing calculator advanced user's reference manual (AUR) (2 ed.). Hewlett-Packard. 2009-07-14 [2005]. pp. J-1, J-2. HP F2228-90010. Archived from the original on 2018-07-08. Retrieved 2015-10-10. Searchable PDF
- ^ a b c "HP RPL TIO Table". holyjoe.org. Archived from the original on 2016-05-23. Retrieved 2015-01-23.
- ^ a b Heinz, Sr., Michael W. (2005). "HP-ASCII and Trigraphs". Archived from the original on 2016-08-02. Retrieved 2016-08-02.
- ^ Finseth, Craig A. (2012-02-25). "chars". Archived from the original on 2017-12-21. Retrieved 2017-12-21.
- ^ "Vim documentation: *digraphs-default*". 2011-01-15. Archived from the original on 2018-12-20. Retrieved 2019-05-12.
- ^ "Digraph - Screen User's Manual". Archived from the original on 2018-12-31. Retrieved 2019-05-12.
- ^ "Appendix F". HP 95LX User's Guide (PDF) (2 ed.). Corvallis, OR, USA: Hewlett-Packard Company, Corvallis Division. June 1991 [March 1991]. F0001-90003. Archived (PDF) from the original on 2016-11-28. Retrieved 2016-11-27.