Carbon negative architecture is architecture whose construction, operation and eventual demolition results in more atmospheric carbon and greenhouse gases removed from the atmosphere than that which is emitted as consequence of the same.[1] This is achieved by rigorous planning, regenerative architectural design and on-site carbon sequestration. Such buildings go beyond the carbon-neutral or net-zero approach, which simply means that buildings can still emit CO2 as long as the operators offset (or remove) those emissions from the atmosphere by the same amount in other places.[2]
Significance
edit
The construction industry emits a large amount of carbon dioxide every year. Concrete, the most used building material globally, accounts for 5% of global annual CO2 emissions due its carbon-extensive production process.[4] In 2023, global carbon emissions were 36.8 billion tons[5] meaning the concrete construction industry alone emitted 1.84 billion tons of CO2 in 2023, more than most countries besides China, the European Union (as a collective), the United States and India.[3]
Features
editCarbon negative buildings try to produce their own renewable energy while avoiding the use of fossil fuels during construction and in the materials used. Oftentimes, these materials can sequester carbon within themselves such as with novel building materials such as hempcrete and other bio-based construction materials, which store carbon within plants and turn said plant matter into building materials, allowing the building to act as a carbon sink. Additionally, by effectively controlling air flow and temperature inside the building through proper ventilation, insulation and breathability, energy efficiency is improved and the carbon output of the building is reduced as a result.[6]
Examples
editCarbon negative architecture is still novel in terms of complete architecture projects; however, there are some completed projects that move toward and accomplish carbon neutral/carbon negative construction practices. The Unisphere building, located in Maryland and unrelated to the Unisphere statue in New York, worked towards this goal. The Unisphere is a private building project sponsored by the United Therapeutics Corporation. The building was completed in 2018, and had a carbon neutral building process by using electricity generated from solar panels on site as well as designing the building for low energy consumption. The building features basement operations which help to naturally cool the building using the earth.[7]
Another example of carbon negative architecture is the Tecla house, a 3D printed small house, produced with a slurry composed primarily of clay alongside other materials such as pieces of rice plants, silt & sand and hydraulic lime. Additionally, wooden support beams uphold the structure of the building. The Tecla house is a prototype currently undergoing more testing.[8]
See also
editReferences
edit- ^ DeWeerdt, Sarah (2020-11-17). "The rise of the carbon-negative building". Anthropocene Magazine. Retrieved 2022-05-23.
- ^ Allen, Jessica. "Net-zero, carbon-neutral, carbon-negative ... confused by all the carbon jargon? Then read this". The Conversation. Retrieved 2021-05-20.
- ^ a b "The changing landscape of global emissions – CO2 Emissions in 2023 – Analysis". IEA. Retrieved 2024-10-24.
- ^ Crow, James Mitchell (2008-03-08). "The concrete conundrum" (PDF). Royal Society of Chemistry. Retrieved 2024-10-24.
- ^ JV. "Fossil CO2 emissions at record high in 2023". Global Carbon Budget. Retrieved 2024-10-24.
- ^ "10 Stages to a Passive Solar Building from Design to Build | Smart Cities Dive". www.smartcitiesdive.com. Retrieved 2024-11-13.
- ^ Faloon, Kelly L. (2019-06-04). "The Unisphere: Urban Test Case for Commercial Net Zero Buildings". HPAC Engineering. Retrieved 2024-10-24.
- ^ "Mario Cucinella Architects and WASP creates 3D-printed sustainable housing prototype". Dezeen. 2021-04-23. Retrieved 2024-11-13.