Daihatsu H-series engine

The Daihatsu H-series engine is a range of four-stroke four-cylinder, internal combustion piston engines, designed by Daihatsu, which is a subsidiary of Toyota. These engines were produced from 1987 through 2009. Ranging from 1.3 L up to 1.6 L, these four-cylinder engines were built with lightness in mind, featuring a hollow crankshaft and camshaft, and the weight of a four-cylinder engine (1.3 L HC) is similar to the 1.0 L three-cylinder CB engines.[1] The H-series engine has aluminium engine blocks and cylinder heads, timing belt driven heads, water-cooled engine cooling system, equipped with both carburetors (earlier models) and Multi-Point Fuel Injection (later models) and only available in 16-valve SOHC design.

Daihatsu H engine
Overview
ManufacturerDaihatsu
Production1987–2009[2]
Layout
ConfigurationInline-4 cylinder
Displacement1.3 L (1,295 cc)
1.5 L (1,498 cc)
1.6 L (1,589 cc)
Cylinder bore76.0 mm (2.99 in)
Piston stroke71.4 mm (2.81 in)
82.6 mm (3.25 in)
87.6 mm (3.45 in)
Cylinder block materialAluminium alloy[3]
Cylinder head materialAluminium alloy[3]
ValvetrainSOHC 16-valve
Compression ratio9.0–10.5:1
RPM range
Max. engine speed6000-6500rpm
Combustion
Fuel systemCarburettor
Fuel injection
Fuel typePetrol
Cooling systemWater-cooled
Output
Power output73–125 PS (72–123 hp; 54–92 kW)
Torque output95–144 N⋅m (9.7–14.7 kg⋅m; 70–106 lbf⋅ft)
Chronology
SuccessorDaihatsu K3 engine
Toyota 3SZ engine

HC (1.3 L)

edit
Based from Japanese Wikipedia article

The engine first appeared in Daihatsu Charade G102/112 in 1987 and was discontinued in 2009. The displacement is 1.3 L (1295 cc), bore and stroke is 76.0 mm x 71.4 mm.[4] Available with carburettor (HC-C/F) and fuel injection (HC-E/EJ). The compression ratio is between 9.0:1 to 9.5:1. Maximum power is between 73–94 PS (72–93 hp; 54–69 kW) at 6000–6500 rpm with 92–118 N⋅m (9.4–12.0 kg⋅m; 68–87 lbf⋅ft) of torque at 3200–4500 rpm. This engine was later replaced by the K3 engine.

Applications:

HD (1.6 L)

edit
Based from Japanese Wikipedia article

First appeared in Daihatsu Applause in June 1989 and discontinued in 2008. The displacement was increased to 1.6 L (1589 cc) by increasing the stroke size of the HC engine to 87.6 mm but retaining the same 76.0 mm bore size.[4] Available with carburettor (HD-C/F1) or fuel injection (HD-E/E1/EG/EP). The compression ratio is between 9.5:1 to 10.5:1. Maximum power is between 82–125 PS (81–123 hp; 60–92 kW) at 5600–6300 rpm with 115–144 N⋅m (11.7–14.7 kg⋅m; 85–106 lbf⋅ft) at 3200–4800 rpm of torque.

Applications:

HE (1.5 L)

edit

The HE engine first appeared in the Daihatsu Charade (G203/213) in 1993 and was discontinued in 2007. The displacement was decreased to 1.5 L (1498 cc) by decreasing the stroke size of HD engine to 82.6 mm but retained the same 76.0 mm bore size.[4] The compression ratio is 9.5:1. Maximum power is between 81–100 PS (80–99 hp; 60–74 kW) at 5600–6300 rpm with 112–127 N⋅m (11.4–13.0 kg⋅m; 83–94 lbf⋅ft) at 3200–3600 rpm of torque. This engine was later replaced by the Toyota 3SZ-VE engine.

Applications:

See also

edit

References

edit
  1. ^ Jongeneel, Jeroen (1988-12-10). "Auto test: Daihatsu Charade 1.3i TXF 4WD". Auto Visie (in Dutch) (25). Amsterdam: BV Uitgeversmaatschappij Bonaventura: 29.
  2. ^ "2004 DAIHATSU HIJET MAXX S91RP-PMREM". OtoFacts. Archived from the original on 2020-04-12. Retrieved 2020-04-12.
  3. ^ a b Giebran El Rizani, Nabiel (2019-09-30). "Berminat Beli Daihatsu Taruna? Perhatikan Penyakit yang Sering Dialami (Interested in Taruna? Pay attention to these problems)" (in Indonesian). Jip.Gridoto.com. Retrieved 2020-04-14.
  4. ^ a b c Dayat, Jal (2019-08-02). "Kelebihan dan kekurangan Daihatsu Espass (The advantages and disadvantages of Daihatsu Espass)" (in Indonesian). Jaldayat.com. Retrieved 2020-04-14.
  5. ^ Alfan, Charis (2016-05-21). "Shelby Patriot (Daihatsu Zebra S90)" (in Indonesian). Mobil Motor Lama. Retrieved 2020-04-12.