Polyethylene wax can be used as a dispersant, slip agent, resin additive, and mold release agent.[1] As an oxidised product, OPEW is authorized in the EU as E number reference E914 only for the surface treatment of some fruits.[2]
There are a variety of methods for producing Polyethylene wax. Polyethylene wax can be made by direct polymerization of ethylene under special conditions that control molecular weight and chain branching of the final polymer. Another method involves thermal and/or mechanical decomposition of high molecular weight polyethylene resin to create lower molecular weight fractions. A third method involves separation of the low molecular weight fraction from a production stream of high molecular weight polymer. These last two methods produce very low molecular weight fractions that should be removed to avoid a product with low flash point that can result in flammability, migration, equipment build up, fouling and other safety and processing issues. Volatiles in these un refined waxes can also account for significant yield loss during processing
Polyethylene wax may be used as lubricant additive to the PVC pipes.[3]
References
edit- ^ "HI-WAX™ Polyethylene Wax". Mitsui Chemicals.
- ^ "Scientific Opinion on the re-evaluation of oxidised polyethylene wax (E 914) as a food additive". EFSA Journal. 13 (6): 4145. 2015. doi:10.2903/j.efsa.2015.4145.
- ^ "PE WAX USING IN PVC PIPES". Aras Petrochemical Co. 2023-03-30. Retrieved 2024-03-17.
 | This material-related article is a stub. You can help Wikipedia by expanding it. |