DescriptionKORG MONOTRON - Serial CV Interface - Installed 2 (by Nick Ames).jpg
The board is small enough to fit inside a Korg Monotron. I used a 3.5mm jack to get the control signal in. The output is wired to the junction of R5 and the ribbon controller, and power comes from an unpopulated decoupling capacitor in the middle of the board.
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.