Wikipedia

Acyl chloride

(Redirected from Formyl chloride)
This article is about the functional group. For the chemical compound, see Acetyl chloride.

In organic chemistry, an acyl chloride (or acid chloride) is an organic compound with the functional group −C(=O)Cl. Their formula is usually written R−COCl, where R is a side chain. They are reactive derivatives of carboxylic acids (R−C(=O)OH). A specific example of an acyl chloride is acetyl chloride, CH3COCl. Acyl chlorides are the most important subset of acyl halides.

General chemical structure of an acyl chloride

Nomenclature

edit

Where the acyl chloride moiety takes priority, acyl chlorides are named by taking the name of the parent carboxylic acid, and substituting -yl chloride for -ic acid. Thus:

acetic acid (CH3COOH) → acetyl chloride (CH3COCl)
benzoic acid (C6H5COOH) → benzoyl chloride (C6H5COCl)
butyric acid (C3H7COOH) → butyryl chloride (C3H7COCl)

(Idiosyncratically, for some trivial names, -oyl chloride substitutes -ic acid. For example, pivalic acid becomes pivaloyl chloride and acrylic acid becomes acryloyl chloride. The names pivalyl chloride and acrylyl chloride are less commonly used, although they are arguably more logical.)

When other functional groups take priority, acyl chlorides are considered prefixes — chlorocarbonyl-:[1]

acetic acid (CH3COOH) → (chlorocarbonyl)acetic acid (ClOCCH2COOH)

Properties

edit

Lacking the ability to form hydrogen bonds, acyl chlorides have lower boiling and melting points than similar carboxylic acids. For example, acetic acid boils at 118 °C, whereas acetyl chloride boils at 51 °C. Like most carbonyl compounds, infrared spectroscopy reveals a band near 1750 cm−1.

The simplest stable acyl chloride is acetyl chloride; formyl chloride is not stable at room temperature, although it can be prepared at –60 °C or below.[2][3]

Acyl chlorides hydrolyze (react with water) to form the corresponding carboxylic acid and hydrochloric acid:

 
 
Structure of 3,5-dinitrobenzoyl chloride with selected bond distances (picometers) and bond angles shown in red.[4]

Synthesis

edit

Industrial routes

edit

The industrial route to acetyl chloride involves the reaction of acetic anhydride with hydrogen chloride:[5]

 

Propionyl chloride is produced by chlorination of propionic acid with phosgene:[6]

 

Benzoyl chloride is produced by the partial hydrolysis of benzotrichloride:[7]

 

Similarly, benzotrichlorides react with carboxylic acids to the acid chloride. This conversion is practiced for the reaction of 1,4-bis(trichloromethyl)benzene to give terephthaloyl chloride:

 

Laboratory methods

edit

Thionyl chloride

edit

In the laboratory, acyl chlorides are generally prepared by treating carboxylic acids with thionyl chloride (SOCl2).[8] The reaction is catalyzed by dimethylformamide and other additives.[9][10]

 

Thionyl chloride[11]⁠ is a well-suited reagent as the by-products (HCl, SO2) are gases and residual thionyl chloride can be easily removed as a result of its low boiling point (76 °C).

Phosphorus chlorides

edit

Phosphorus trichloride (PCl3) is popular,[12] although excess reagent is required.[9] Phosphorus pentachloride (PCl5) is also effective,[13][14] but only one chloride is transferred:

 

Oxalyl chloride

edit

Another method involves the use of oxalyl chloride:

 

The reaction is catalysed by dimethylformamide (DMF), which reacts with oxalyl chloride to give the Vilsmeier reagent, an iminium intermediate that which reacts with the carboxylic acid to form a mixed imino-anhydride. This structure undergoes an acyl substitution with the liberated chloride, forming the acid anhydride and releasing regenerated molecule of DMF.[10] Relative to thionyl chloride, oxalyl chloride is more expensive but also a milder reagent and therefore more selective.

 

Other laboratory methods

edit

Acid chlorides can be used as a chloride source.[15] Thus acetyl chloride can be distilled from a mixture of benzoyl chloride and acetic acid:[9]

 

Other methods that do not form HCl include the Appel reaction:[16]

 

Another is the use of cyanuric chloride:[17]

 

Reactions

edit

Acyl chloride are reactive, versatile reagents.[18] Acyl chlorides have a greater reactivity than other carboxylic acid derivatives like acid anhydrides, esters or amides:

 

Acyl chlorides hydrolyze, yielding the carboxylic acid:

 

This hydrolysis is usually a nuisance rather than intentional.

edit

Acid chlorides are useful for the preparation of amides, esters, anhydrides. These reactions generate chloride, which can be undesirable.Acyl chlorides are used to prepare acid anhydrides, amides and esters, by reacting acid chlorides with: a salt of a carboxylic acid, an amine, or an alcohol, respectively.

 
 
 

Acid halides are the most reactive acyl derivatives, and can easily be converted into any of the others. Acid halides will react with carboxylic acids to form anhydrides. If the structure of the acid and the acid chloride are different, the product is a mixed anhydride. First, the carboxylic acid attacks the acid chloride (1) to give tetrahedral intermediate 2. The tetrahedral intermediate collapses, ejecting chloride ion as the leaving group and forming oxonium species 3. Deprotonation gives the mixed anhydride, 4, and an equivalent of HCl.

 

Alcohols and amines react with acid halides to produce esters and amides, respectively, in a reaction formally known as the Schotten-Baumann reaction.[19] Acid halides hydrolyze in the presence of water to produce carboxylic acids, but this type of reaction is rarely useful, since carboxylic acids are typically used to synthesize acid halides. Most reactions with acid halides are carried out in the presence of a non-nucleophilic base, such as pyridine, to neutralize the hydrohalic acid that is formed as a byproduct.

Mechanism

edit

The alcoholysis of acyl halides (the alkoxy-dehalogenation) is believed to proceed via an SN2 mechanism (Scheme 10).[20]⁠ However, the mechanism can also be tetrahedral or SN1 in highly polar solvents[21]⁠ (while the SN2 reaction involves a concerted reaction, the tetrahedral addition-elimination pathway involves a discernible intermediate).[22]

 

Bases, such as pyridine or N,N-dimethylformamide, catalyze acylations.[14][10] These reagents activate the acyl chloride via a nucleophilic catalysis mechanism. The amine attacks the carbonyl bond and presumably[23]⁠ first forms a transient tetrahedral intermediate, then forms a quaternary acylammonium salt by the displacement of the leaving group. This quaternary acylammonium salt is more susceptible to attack by alcohols or other nucleophiles.

 

The use of two phases (aqueous for amine, organic for acyl chloride) is called the Schotten-Baumann reaction. This approach is used in the preparation of nylon via the so-called nylon rope trick.[24]⁠

Reactions with carbanions

edit

Acid halides react with carbon nucleophiles, such as Grignards and enolates, although mixtures of products can result. While a carbon nucleophile will react with the acid halide first to produce a ketone, the ketone is also susceptible to nucleophilic attack, and can be converted to a tertiary alcohol. For example, when benzoyl chloride (1) is treated with two equivalents of a Grignard reagent, such as methyl magnesium bromide (MeMgBr), 2-phenyl-2-propanol (3) is obtained in excellent yield. Although acetophenone (2) is an intermediate in this reaction, it is impossible to isolate because it reacts with a second equivalent of MeMgBr rapidly after being formed.[25]

 

 
A Weinreb amide.

Unlike most other carbon nucleophiles, lithium dialkylcuprates – often called Gilman reagents – can add to acid halides just once to give ketones. The reaction between an acid halide and a Gilman reagent is not a nucleophilic acyl substitution reaction, however, and is thought to proceed via a radical pathway.[26] The Weinreb ketone synthesis can also be used to convert acid halides to ketones. In this reaction, the acid halide is first converted to an N–methoxy–N–methylamide, known as a Weinreb amide. When a carbon nucleophile – such as a Grignard or organolithium reagent – adds to a Weinreb amide, the metal is chelated by the carbonyl and N–methoxy oxygens, preventing further nucleophilic additions.[27]

Carbon nucleophiles such as Grignard reagents, convert acyl chlorides to ketones, which in turn are susceptible to the attack by second equivalent to yield the tertiary alcohol. The reaction of acyl halides with certain organocadmium reagents stops at the ketone stage.[28] The reaction with Gilman reagents also afford ketones, reflecting the low nucleophilicity of these lithium diorganocopper compounds.[14]

Reduction

edit

Acyl chlorides are reduced by lithium aluminium hydride and diisobutylaluminium hydride to give primary alcohols. Lithium tri-tert-butoxyaluminium hydride, a bulky hydride donor, reduces acyl chlorides to aldehydes, as does the Rosenmund reduction using hydrogen gas over a poisoned palladium catalyst.[29]

 
The Rosenmund reduction

Acylation of arenes

edit

In the Friedel–Crafts acylation, acid halides act as electrophiles for electrophilic aromatic substitution. A Lewis acid – such as zinc chloride (ZnCl2), iron(III) chloride (FeCl3), or aluminum chloride (AlCl3) – coordinates to the halogen on the acid halide, activating the compound towards nucleophilic attack by an activated aromatic ring. For especially electron-rich aromatic rings, the reaction will proceed without a Lewis acid.[30][12][14]

 

Because of the harsh conditions and the reactivity of the intermediates, this otherwise quite useful reaction tends to be messy, as well as environmentally unfriendly.

Oxidative addition

edit

Acyl chlorides react with low-valent metal centers to give transition metal acyl complexes. Illustrative is the oxidative addition of acetyl chloride to Vaska's complex, converting square planar Ir(I) to octahedral Ir(III):[31]

 

Hazards

edit

Low molecular weight acyl chlorides are often lachrymators, and they react violently with water, alcohols, and amines.

References

edit
  1. ^ Nomenclature of Organic Chemistry, R-5.7.6 Acid halides
  2. ^ Sih, John C. (2001-04-15), "Formyl Chloride", in John Wiley & Sons, Ltd (ed.), Encyclopedia of Reagents for Organic Synthesis, John Wiley & Sons, Ltd, doi:10.1002/047084289x.rf026, ISBN 9780471936237
  3. ^ Richard O.C. Norman; James M. Coxon (16 September 1993). Principles of Organic Synthesis, 3rd Edition. CRC Press. p. 371. ISBN 978-0-7487-6162-3.
  4. ^ Wang, Hong-Yong; Xie, Min-Hao; Luo, Shi-Neng; Zou, Pei; Liu, Ya-Ling (2009). "3,5-Dinitrobenzoyl chloride". Acta Crystallographica Section E. 65 (10): o2460. Bibcode:2009AcCrE..65o2460W. doi:10.1107/S1600536809036228. PMC 2970283. PMID 21577915.
  5. ^ US patent 5672749, Phillip R. DeVrou, W. Bryan Waites, Robert E. Young, "Process for preparing acetyl chloride" 
  6. ^ Samel, Ulf-Rainer; Kohler, Walter; Gamer, Armin Otto; Keuser, Ullrich (2005). "Propionic acid and derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_223. ISBN 978-3527306732.
  7. ^ Maki, Takao; Takeda, Kazuo (2002). "Benzoic acid and derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a03_555. ISBN 978-3527306732.
  8. ^ Helferich, B.; Schaefer, W. (1929). "n-Butyrl chloride". Organic Syntheses. 9: 32. doi:10.15227/orgsyn.009.0032.
  9. ^ a b c Martin Ansell (1972). "Preparation of acyl halides". In Saul Patai (ed.). Acyl Halides. PATAI'S Chemistry of Functional Groups. pp. 35–68. doi:10.1002/9780470771273.ch2. ISBN 9780470771273.
  10. ^ a b c Clayden, Jonathan (2001). Organic chemistry. Oxford: Oxford University Press. pp. 276–296. ISBN 0-19-850346-6.
  11. ^ J. S. Pizey, Synthetic Reagents, Vol. 1, Halsted Press, New York, 1974.
  12. ^ a b Allen, C. F. H.; Barker, W. E. (1932). "Desoxybenzoin". Organic Syntheses. 12: 16. doi:10.15227/orgsyn.012.0016.
  13. ^ Adams, Roger (1923). "p-Nitrobenzoyl Chloride". Organic Syntheses. 3: 75. doi:10.15227/orgsyn.003.0075.
  14. ^ a b c d Boyd, Robert W.; Morrison, Robert (1992). Organic Chemistry. Englewood Cliffs, N.J: Prentice Hall. pp. 666–762. ISBN 0-13-643669-2.
  15. ^ L. P. Kyrides (1940). "Fumaryl Chloride". Organic Syntheses. 20: 51. doi:10.15227/orgsyn.020.0051.
  16. ^ "Triphenylphosphine-carbon tetrachloride Taschner, Michael J. e-EROS: Encyclopedia of Reagents for Organic Synthesis, 2001
  17. ^ K. Venkataraman; D. R. Wagle (1979). "Cyanuric chloride : a useful reagent for converting carboxylic acids into chlorides, esters, amides and peptides". Tetrahedron Lett. 20 (32): 3037–3040. doi:10.1016/S0040-4039(00)71006-9.
  18. ^ Sonntag, Norman O. V. (1953-04-01). "The Reactions of Aliphatic Acid Chlorides". Chemical Reviews. 52 (2): 237–416. doi:10.1021/cr60162a001. ISSN 0009-2665.
  19. ^ Kürti, László; Barbara Czakó (2005). Strategic Applications of Named Reactions in Organic Synthesis. London: Elsevier Academic Press. p. 398. ISBN 0124297854.
  20. ^ Bentley, T. William; Llewellyn, Gareth; McAlister, J. Anthony (January 1996). "SN2 Mechanism for Alcoholysis, Aminolysis, and Hydrolysis of Acetyl Chloride". The Journal of Organic Chemistry. 61 (22): 7927–7932. doi:10.1021/jo9609844. ISSN 0022-3263. PMID 11667754.
  21. ^ C. H. Bamford and C. F. H. Tipper, Comprehensive Chemical Kinetics: Ester Formation and Hydrolysis and Related Reactions, Elsevier, Amsterdam, 1972.
  22. ^ Fox, Joseph M.; Dmitrenko, Olga; Liao, Lian-an; Bach, Robert D. (October 2004). "Computational Studies of Nucleophilic Substitution at Carbonyl Carbon: the S N 2 Mechanism versus the Tetrahedral Intermediate in Organic Synthesis". The Journal of Organic Chemistry. 69 (21): 7317–7328. doi:10.1021/jo049494z. ISSN 0022-3263. PMID 15471486.
  23. ^ Hubbard, Patricia; Brittain, William J. (February 1998). "Mechanism of Amine-Catalyzed Ester Formation from an Acid Chloride and Alcohol". The Journal of Organic Chemistry. 63 (3): 677–683. doi:10.1021/jo9716643. ISSN 0022-3263. PMID 11672060.
  24. ^ Morgan, Paul W.; Kwolek, Stephanie L. (April 1959). "The nylon rope trick: Demonstration of condensation polymerization". Journal of Chemical Education. 36 (4): 182. Bibcode:1959JChEd..36..182M. doi:10.1021/ed036p182. ISSN 0021-9584.
  25. ^ McMurry 1996, pp. 826–827.
  26. ^ Cite error: The named reference mcmurry was invoked but never defined (see the help page).
  27. ^ Kürti and Czakó 2005, p. 478.
  28. ^ David A. Shirley (2011). "The Synthesis of Ketones from Acid Halides and Organometallic Compounds of Magnesium, Zinc, and Cadmium". Org. Reactions: 28–58. doi:10.1002/0471264180.or008.02. ISBN 978-0471264187.
  29. ^ William Reusch. "Carboxylic Acid Derivatives". VirtualText of Organic Chemistry. Michigan State University. Archived from the original on 2016-05-16. Retrieved 2009-02-19.
  30. ^ Kürti and Czakó 2005, p. 176.
  31. ^ Hartwig, John (2010). Organotransition Metal Chemistry: From Bonding to Catalysis. New York: University Science Books. p. 1160. ISBN 978-1-938787-15-7.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Acyl_chloride&oldid=1254626187"