Geological formation

(Redirected from Geologic formation)

A geological formation, or simply formation, is a body of rock having a consistent set of physical characteristics (lithology) that distinguishes it from adjacent bodies of rock, and which occupies a particular position in the layers of rock exposed in a geographical region (the stratigraphic column). It is the fundamental unit of lithostratigraphy, the study of strata or rock layers.[1][2]

A geologic cross section of the Grand Canyon. Black numbers correspond to groups of formations and white numbers correspond to formations (click on picture for more information)

A formation must be large enough that it can be mapped at the surface or traced in the subsurface. Formations are otherwise not defined by the thickness of their rock strata, which can vary widely. They are usually, but not universally, tabular in form. They may consist of a single lithology (rock type), or of alternating beds of two or more lithologies, or even a heterogeneous mixture of lithologies, so long as this distinguishes them from adjacent bodies of rock.[1][2]

The concept of a geologic formation goes back to the beginnings of modern scientific geology. The term was used by Abraham Gottlob Werner in his theory of the origin of the Earth, which was developed over the period from 1774 to his death in 1817.[3] The concept became increasingly formalized over time and is now codified in such works as the North American Stratigraphic Code and its counterparts in other regions.[4]

Geologic maps showing where various formations are exposed at the surface are fundamental to such fields as structural geology, allowing geologists to infer the tectonic history of a region or predict likely locations for buried mineral resources.[5]

Defining formations

edit
 
The Permian through Jurassic strata of the Colorado Plateau area of southeastern Utah demonstrate the principles of stratigraphy. These strata make up much of the famous prominent rock formations in widely spaced protected areas such as Capitol Reef National Park and Canyonlands National Park. From top to bottom: Rounded tan domes of the Navajo Sandstone, layered red Kayenta Formation, cliff-forming, vertically jointed, red Wingate Sandstone, slope-forming, purplish Chinle Formation, layered, lighter-red Moenkopi Formation, and white, layered Cutler Formation sandstone. Picture from Glen Canyon National Recreation Area, Utah.
 
Uluru (Ayers Rock) in Australia is underlain by the Mutitjulu Arkose, a formation composed almost entirely of a single lithology (arkosic sandstone).
 
The Summerville Formation is composed of alternating thin beds of two lithologies, mudstone and sandstone, penetrated by veins of a third lithology, gypsum.

The boundaries of a formation are chosen to give it the greatest practical lithological consistency. Formations should not be defined by any criteria other than lithology. The lithology of a formation includes characteristics such as chemical and mineralogical composition, texture, color, primary depositional structures, fossils regarded as rock-forming particles, or other organic materials such as coal or kerogen. The taxonomy of fossils is not a valid lithological basis for defining a formation. [2]

The contrast in lithology between formations required to justify their establishment varies with the complexity of the geology of a region. Formations must be able to be delineated at the scale of geologic mapping normally practiced in the region; the thickness of formations may range from less than a meter to several thousand meters.[2]

Geologic formations are typically named after a permanent natural or artificial feature of the geographic area in which they were first described. The name consists of the geographic name plus either "Formation" or a descriptive name. Examples include the Morrison Formation, named for the town of Morrison, Colorado, and the Kaibab Limestone, named after the Kaibab Plateau of Arizona. The names must not duplicate previous formation names, so, for example, a newly designated formation could not be named the Kaibab Formation, since the Kaibab Limestone is already established as a formation name. The first use of a name has precedence over all others, as does the first name applied to a particular formation.[6]

As with other stratigraphic units, the formal designation of a formation includes a stratotype which is usually a type section. A type section is ideally a good exposure of the formation that shows its entire thickness. If the formation is nowhere entirely exposed, or if it shows considerably lateral variation, additional reference sections may be defined. Long-established formations dating to before the modern codification of stratigraphy, or which lack tabular form (such as volcanic formations), may substitute a type locality for a type section as their stratotype. The geologist defining the formation is expected to describe the stratotype in sufficient detail that other geologists can unequivocally recognize the formation.[7]

Although formations should not be defined by any criteria other than primary lithology, it is often useful to define biostratigraphic units on paleontological criteria, chronostratigraphic units on the age of the rocks, and chemostratigraphic units on geochemical criteria, and these are included in stratigraphic codes.[8]

Usefulness of formations

edit

The concept of formally defined layers or strata is central to the geologic discipline of stratigraphy, and the formation is the fundamental unit of stratigraphy. Formations may be combined into groups of strata or divided into members. Members differ from formations in that they need not be mappable at the same scale as formations, though they must be lithologically distinctive where present.[9]

The definition and recognition of formations allow geologists to correlate geologic strata across wide distances between outcrops and exposures of rock strata. Formations were at first described as the essential geologic time markers, based on their relative ages and the law of superposition. The divisions of the geological time scale were described and put in chronological order by the geologists and stratigraphers of the 18th and 19th centuries.[10]

Geologic formations can be usefully defined for sedimentary rock layers, low-grade metamorphic rocks, and volcanic rocks. Intrusive igneous rocks and highly metamorphosed rocks are generally not considered to be formations, but are described instead as lithodemes.[11]

Other uses of the term

edit

"Formation" is also used informally to describe the odd shapes (forms) that rocks acquire through erosional or depositional processes. Such a formation is abandoned when it is no longer affected by the geologic agent that produced it. Some well-known cave formations include stalactites and stalagmites.

See also

edit

Footnotes

edit

References

edit
  • Boggs, Sam Jr. (1987). Principles of sedimentology and stratigraphy (1st ed.). Merrill Pub. Co. ISBN 0675204879.
  • Frank, Adams Dawson (1938). The Birth and Development of the Geological Sciences. Baltimore: The Williams & Wilkins Company.
  • North American Commission on Stratigraphic Nomenclature (November 2005). "North American Stratigraphic Code" (PDF). AAPG Bulletin. 89 (11): 1547–1591. Bibcode:2005BAAPG..89.1547.. doi:10.1306/07050504129. Retrieved 8 August 2020.
  • Ghosh, S.K. (1993). Structural geology : fundamentals and modern developments (1st ed.). Pergamon Press. ISBN 0-08-041879-1.

Further reading

edit
  • Brookfield, Michael E. (2008). Principles of Stratigraphy. John Wiley & Sons. pp. 111–114, 200. ISBN 9780470693223.
  • Rey, Jacques; Simone Galeotti, eds. (2008). Stratigraphy : terminology and practice. Paris, France: Editions OPHRYS. ISBN 9782710809104.
edit