Half-speed mastering is a technique occasionally used when cutting the acetate lacquers from which phonograph records are produced. The cutting machine platter is run at half of the usual speed (16 2⁄3 rpm for 33 1⁄3 rpm records) while the signal to be recorded is fed to the cutting head at half of its regular playback speed.[1]
The reasons for using this technique vary, but it is generally used for improving the high-frequency response of the finished record.[2] By halving the speed during cutting, very high frequencies that are difficult to cut become much easier to cut since they are now mid-range frequencies.[3]
Mobile Fidelity Sound Lab used half-speed mastering for its Original Master Recording LP's.
References
edit- ^ Hoffman, Charles (December 22, 2018). "Half-Speed Mastering Explained". sonicscoop.com. Retrieved 2021-02-19. [dead link]
- ^ "All You Need To Know about Half Speed Mastering | uDiscover". uDiscover Music. Retrieved 2021-08-13.
- ^ Henshall, Marc (May 7, 2019). "What is Half-Speed Mastering?". www.yoursoundmatters.com. Retrieved 2021-02-19.
 | This sound technology article is a stub. You can help Wikipedia by expanding it. |