In mathematics, de Rham cohomology (named after Georges de Rham) is a tool belonging both to algebraic topology and to differential topology, capable of expressing basic topological information about smooth manifolds in a form particularly adapted to computation and the concrete representation of cohomology classes. It is a cohomology theory based on the existence of differential forms with prescribed properties.

Vector field corresponding to a differential form on the punctured plane that is closed but not exact, showing that the de Rham cohomology of this space is non-trivial.

On any smooth manifold, every exact form is closed, but the converse may fail to hold. Roughly speaking, this failure is related to the possible existence of "holes" in the manifold, and the de Rham cohomology groups comprise a set of topological invariants of smooth manifolds that precisely quantify this relationship.[1]

The integration on forms concept is of fundamental importance in differential topology, geometry, and physics, and also yields one of the most important examples of cohomology, namely de Rham cohomology, which (roughly speaking) measures precisely the extent to which the fundamental theorem of calculus fails in higher dimensions and on general manifolds.
— Terence Tao, Differential Forms and Integration[2]

Definition

edit

The de Rham complex is the cochain complex of differential forms on some smooth manifold M, with the exterior derivative as the differential:

 

where Ω0(M) is the space of smooth functions on M, Ω1(M) is the space of 1-forms, and so forth. Forms that are the image of other forms under the exterior derivative, plus the constant 0 function in Ω0(M), are called exact and forms whose exterior derivative is 0 are called closed (see Closed and exact differential forms); the relationship d2 = 0 then says that exact forms are closed.

In contrast, closed forms are not necessarily exact. An illustrative case is a circle as a manifold, and the 1-form corresponding to the derivative of angle from a reference point at its centre, typically written as (described at Closed and exact differential forms). There is no function θ defined on the whole circle such that is its derivative; the increase of 2π in going once around the circle in the positive direction implies a multivalued function θ. Removing one point of the circle obviates this, at the same time changing the topology of the manifold.

One prominent example when all closed forms are exact is when the underlying space is contractible to a point or, more generally, if it is simply connected (no-holes condition). In this case the exterior derivative   restricted to closed forms has a local inverse called a homotopy operator.[3][4] Since it is also nilpotent,[3] it forms a dual chain complex with the arrows reversed[5] compared to the de Rham complex. This is the situation described in the Poincaré lemma.

The idea behind de Rham cohomology is to define equivalence classes of closed forms on a manifold. One classifies two closed forms α, β ∈ Ωk(M) as cohomologous if they differ by an exact form, that is, if αβ is exact. This classification induces an equivalence relation on the space of closed forms in Ωk(M). One then defines the k-th de Rham cohomology group   to be the set of equivalence classes, that is, the set of closed forms in Ωk(M) modulo the exact forms.

Note that, for any manifold M composed of m disconnected components, each of which is connected, we have that

 

This follows from the fact that any smooth function on M with zero derivative everywhere is separately constant on each of the connected components of M.

de Rham cohomology computed

edit

One may often find the general de Rham cohomologies of a manifold using the above fact about the zero cohomology and a Mayer–Vietoris sequence. Another useful fact is that the de Rham cohomology is a homotopy invariant. While the computation is not given, the following are the computed de Rham cohomologies for some common topological objects:

The n-sphere

edit

For the n-sphere,  , and also when taken together with a product of open intervals, we have the following. Let n > 0, m ≥ 0, and I be an open real interval. Then

 

The n-torus

edit

The  -torus is the Cartesian product:  . Similarly, allowing   here, we obtain

 

We can also find explicit generators for the de Rham cohomology of the torus directly using differential forms. Given a quotient manifold   and a differential form   we can say that   is  -invariant if given any diffeomorphism induced by  ,   we have  . In particular, the pullback of any form on   is  -invariant. Also, the pullback is an injective morphism. In our case of   the differential forms   are  -invariant since  . But, notice that   for   is not an invariant  -form. This with injectivity implies that

 

Since the cohomology ring of a torus is generated by  , taking the exterior products of these forms gives all of the explicit representatives for the de Rham cohomology of a torus.

Punctured Euclidean space

edit

Punctured Euclidean space is simply   with the origin removed.

 

The Möbius strip

edit

We may deduce from the fact that the Möbius strip, M, can be deformation retracted to the 1-sphere (i.e. the real unit circle), that:

 

de Rham theorem

edit

Stokes' theorem is an expression of duality between de Rham cohomology and the homology of chains. It says that the pairing of differential forms and chains, via integration, gives a homomorphism from de Rham cohomology   to singular cohomology groups   de Rham's theorem, proved by Georges de Rham in 1931, states that for a smooth manifold M, this map is in fact an isomorphism.

More precisely, consider the map

 

defined as follows: for any  , let I(ω) be the element of   that acts as follows:

 

The theorem of de Rham asserts that this is an isomorphism between de Rham cohomology and singular cohomology.

The exterior product endows the direct sum of these groups with a ring structure. A further result of the theorem is that the two cohomology rings are isomorphic (as graded rings), where the analogous product on singular cohomology is the cup product.

Sheaf-theoretic de Rham isomorphism

edit

For any smooth manifold M, let   be the constant sheaf on M associated to the abelian group  ; in other words,   is the sheaf of locally constant real-valued functions on M. Then we have a natural isomorphism

 

between the de Rham cohomology and the sheaf cohomology of  . (Note that this shows that de Rham cohomology may also be computed in terms of Čech cohomology; indeed, since every smooth manifold is paracompact Hausdorff we have that sheaf cohomology is isomorphic to the Čech cohomology   for any good cover   of M.)

Proof

edit

The standard proof proceeds by showing that the de Rham complex, when viewed as a complex of sheaves, is an acyclic resolution of  . In more detail, let m be the dimension of M and let   denote the sheaf of germs of  -forms on M (with   the sheaf of   functions on M). By the Poincaré lemma, the following sequence of sheaves is exact (in the abelian category of sheaves):

 

This long exact sequence now breaks up into short exact sequences of sheaves

 

where by exactness we have isomorphisms   for all k. Each of these induces a long exact sequence in cohomology. Since the sheaf   of   functions on M admits partitions of unity, any  -module is a fine sheaf; in particular, the sheaves   are all fine. Therefore, the sheaf cohomology groups   vanish for   since all fine sheaves on paracompact spaces are acyclic. So the long exact cohomology sequences themselves ultimately separate into a chain of isomorphisms. At one end of the chain is the sheaf cohomology of   and at the other lies the de Rham cohomology.

edit

The de Rham cohomology has inspired many mathematical ideas, including Dolbeault cohomology, Hodge theory, and the Atiyah–Singer index theorem. However, even in more classical contexts, the theorem has inspired a number of developments. Firstly, the Hodge theory proves that there is an isomorphism between the cohomology consisting of harmonic forms and the de Rham cohomology consisting of closed forms modulo exact forms. This relies on an appropriate definition of harmonic forms and of the Hodge theorem. For further details see Hodge theory.

Harmonic forms

edit

If M is a compact Riemannian manifold, then each equivalence class in   contains exactly one harmonic form. That is, every member   of a given equivalence class of closed forms can be written as

 

where   is exact and   is harmonic:  .

Any harmonic function on a compact connected Riemannian manifold is a constant. Thus, this particular representative element can be understood to be an extremum (a minimum) of all cohomologously equivalent forms on the manifold. For example, on a 2-torus, one may envision a constant 1-form as one where all of the "hair" is combed neatly in the same direction (and all of the "hair" having the same length). In this case, there are two cohomologically distinct combings; all of the others are linear combinations. In particular, this implies that the 1st Betti number of a 2-torus is two. More generally, on an  -dimensional torus  , one can consider the various combings of  -forms on the torus. There are   choose   such combings that can be used to form the basis vectors for  ; the  -th Betti number for the de Rham cohomology group for the  -torus is thus   choose  .

More precisely, for a differential manifold M, one may equip it with some auxiliary Riemannian metric. Then the Laplacian   is defined by

 

with   the exterior derivative and   the codifferential. The Laplacian is a homogeneous (in grading) linear differential operator acting upon the exterior algebra of differential forms: we can look at its action on each component of degree   separately.

If   is compact and oriented, the dimension of the kernel of the Laplacian acting upon the space of k-forms is then equal (by Hodge theory) to that of the de Rham cohomology group in degree  : the Laplacian picks out a unique harmonic form in each cohomology class of closed forms. In particular, the space of all harmonic  -forms on   is isomorphic to   The dimension of each such space is finite, and is given by the  -th Betti number.

Hodge decomposition

edit

Let   be a compact oriented Riemannian manifold. The Hodge decomposition states that any  -form on   uniquely splits into the sum of three L2 components:

 

where   is exact,   is co-exact, and   is harmonic.

One says that a form   is co-closed if   and co-exact if   for some form  , and that   is harmonic if the Laplacian is zero,  . This follows by noting that exact and co-exact forms are orthogonal; the orthogonal complement then consists of forms that are both closed and co-closed: that is, of harmonic forms. Here, orthogonality is defined with respect to the L2 inner product on  :

 

By use of Sobolev spaces or distributions, the decomposition can be extended for example to a complete (oriented or not) Riemannian manifold.[6]

See also

edit

Citations

edit
  1. ^ Lee 2013, p. 440.
  2. ^ Tao, Terence (2007) "Differential Forms and Integration" Princeton Companion to Mathematics 2008. Timothy Gowers, ed.
  3. ^ a b Edelen, Dominic G. B. (2011). Applied exterior calculus (Revised ed.). Mineola, N.Y.: Dover Publications. ISBN 978-0-486-43871-9. OCLC 56347718.
  4. ^ Warner, Frank W. (1983). Foundations of differentiable manifolds and Lie groups. New York: Springer. ISBN 0-387-90894-3. OCLC 9683855.
  5. ^ Kycia, Radosław Antoni (2020). "The Poincare Lemma, Antiexact Forms, and Fermionic Quantum Harmonic Oscillator". Results in Mathematics. 75 (3): 122. arXiv:1908.02349. doi:10.1007/s00025-020-01247-8. ISSN 1422-6383. S2CID 199472766.
  6. ^ Jean-Pierre Demailly, Complex Analytic and Differential Geometry Ch VIII, § 3.

References

edit
edit