Pressure washing or power washing is the use of high-pressure water spray to remove loose paint, mold, grime, dust, mud, and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a mechanical pressure washer is expressed in gallons or liters per minute,[1] often designed into the pump and not variable. The pressure, expressed in pounds per square inch, pascals, or bar, is designed into the pump but can be varied by adjusting the unloader valve or using specialized nozzle tips. Machines that produce pressures from 750 to 30,000 psi (5 to 200 MPa) or more are available.
The terms pressure washing and power washing are used interchangeably in many scenarios, and there is some debate as to whether they are actually different processes.
An industrial pressure washing surface cleaner is a tool consisting of two to four high-pressure jets on a rotating bar that swivels when water is flowing. Some systems involve a wheeled circular shroud which is moved along the surface which protects the user from spray and debris. This action creates a uniformed cleaning pattern that can clean flat surfaces at a rapid rate. Many cheap household/consumer grade systems typically use a single orifice which cannot be altered for spray pattern.
Hydro-jet cleaning is a more powerful form of power washing, employed to remove buildup and debris in tanks and lines.[2]
Areas of use
editPressure washing is employed by businesses and homeowners to reduce allergies, minimize hazards, and improve aesthetics. A pressure washer is used to clean residential surfaces such as gutters, roofs, decks, paved areas, siding, cladding, and windows. They are also used to clean commercial surfaces such as office buildings, churches, schools, hospitals, and other large buildings.[3]
Equipment
edit
There are 2 main types of pressure washers. Hot water pressure washers and cold water pressure washers. Each have their own purpose. [4] Hot water pressure washers are best for washing flatwork (concrete driveways, walkways, etc) that can have grease or oil residue. They are best to use when cleaning parking garages, drive thru's, and gas stations. Hot water is achieved with the use of a burner unit. Hot water helps emulsify grease and oil on surfaces and helping to remove it quicker. Cold water machines are most commonly used to wash residential areas. Siding, gutters, roofs, decks, and windows can all be cleaned effectively with the use of a cold water pressure washer.
Surface cleaners are pressure wash tools that facilitate the even cleaning of larger flat surface areas. There are many models available that attach to the end of a pressure washer wand. A surface cleaner has a disc shaped housing covering a rotating bar with a nozzle at each end. In use, the high pressure water is split into two steams which emerge through nozzles at the ends of the bar, directing the jets against the surface to be cleaned and inducing rotation of the bar. When the unit is moved over the surface the rotating jets clean a swathe a little smaller than the circular cover, which confines splashback and reduces noise. Larger models may have castors to maintain clearance and allow easy control of movement over reasonably smooth surfaces. Smaller versions may rely on a ring of plastic bristles for the same purpose.[5] The water enters the surface cleaner through a trigger gun at the top of the handle bar, travels through a hose, the swivel, and the bar ending up passing through specifically sized nozzles to spray the surface and remove dirt and grime.
Nozzles
editPressure washer nozzles alter the direction of flow and velocity of the water. Nozzles allow users to reach a greater distance or apply more pressure to a difficult-to-clean surface. Nozzles are color-coded for easy identification, with black nozzles covering the widest degree (65°) and red nozzles covering the least (0°). Great care should be taken when using a 0° nozzle as it can cause injury to both the user and passersby, as well as damage to surfaces.[6] Nozzles are sized based on the flow rate (GPM) and delivery pressure (PSI) of the machine.[7]
High-pressure water jetting
editHigh-pressure water jetting, also called hydrojetting, is a variation in which the pressure can be significantly higher (up to 1,400 bars (20,000 psi)) than consumer models, and is sufficiently hazardous that special precautions are necessary for acceptable safety. High-pressure water jetting also has applications in cutting a wide range of materials with very low heat input or dust production, and can be effective underwater.[8][9]
Some advantages of this technology for use in the oil and gas production industry are that it has a low fire and explosion hazard and the waste products are relatively easy to dispose of. It is used for cleaning tanks, pipes, sieves, filters and heat exchangers, for removal of coatings, corrosion products, scale, old paint, burned materials, biological fouling, and many insoluble substances, with little or no damage to the substrate when the appropriate pressure is used. These procedures can be done above and under water.[10]
See also
edit- Briggs & Stratton – American manufacturing company
- Kärcher – German company known for its high-pressure cleaners
- Nilfisk – Danish cleaning equipment company
- Reverse graffiti – Method of creating images on surfaces by removing dirt
- Washdown
References
edit- ^ "PRESSURE WASHER PSI VS GPM: WHAT'S MORE IMPORTANT?". Pro Tools Review. Retrieved 2023-11-01.
- ^ Blaxter & Russell; J. H. S. Blaxter; Frederick S. Russell (1984). Advances in Marine Biology, Volume 21. Academic Press. p. 33. ISBN 0-12-026121-9.
- ^ Robison, Jeff (2023-06-21). "Signs Your Commercial Building Needs Pressure Washing". Retrieved 2023-10-27.
- ^ "Which Pressure Washer is Right for You? Hot Water Pressure Washer vs. Cold Water". Mi-T-M Blog. 2022-10-08. Retrieved 2023-10-27.
- ^ "The Best Pressure Washer Surface Cleaners Tested in 2023". Bob Vila. 2021-05-28. Retrieved 2023-10-27.
- ^ "Pressure Washer Safety". cdc.gov. Retrieved 2021-02-23.
- ^ "Nozzle Chart – ENVIROSPEC". envirospec.com. Retrieved 2023-10-27.
- ^ "About High-pressure Water Jetting Systems and Their Applications". www.bestline.co.za. Retrieved 26 February 2024.
- ^ "High pressure hydrojetting catalogue 2018" (PDF). pressurejet.com. Retrieved 27 January 2014.
- ^ "High pressure water jetting in the oil and gas industry" (PDF). s1.kaercher-media.com. Retrieved 26 February 2024.
Further reading
edit- Steel Structures Painting Council (1995), Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating. Pittsburgh, PA. SSPC
- U.S. Water Jet Technology Association, Recommended Practices for the Use of Manually Operated High-Pressure Water Jetting Equipment, St. Louis, MO: US Water Jet Technology Association, 1987