Impact ionization

(Redirected from Impact ionisation)

Impact ionization is the process in a material by which one energetic charge carrier can lose energy by the creation of other charge carriers. For example, in semiconductors, an electron (or hole) with enough kinetic energy can knock a bound electron out of its bound state (in the valence band) and promote it to a state in the conduction band, creating an electron-hole pair. For carriers to have sufficient kinetic energy a sufficiently large electric field must be applied,[1] in essence requiring a sufficiently large voltage but not necessarily a large current.

An example of an incoming electron impact ionizing to produce a new electron-hole pair

If this occurs in a region of high electrical field then it can result in avalanche breakdown. This process is exploited in avalanche diodes, by which a small optical signal is amplified before entering an external electronic circuit. In an avalanche photodiode the original charge carrier is created by the absorption of a photon.

The impact ionization process is used in modern cosmic dust detectors like the Galileo Dust Detector[2] and dust analyzers Cassini CDA,[3] Stardust CIDA and the Surface Dust Analyser[4] for the identification of dust impacts and the compositional analysis of cosmic dust particles.

In some sense, impact ionization is the reverse process to Auger recombination.

Avalanche photodiodes (APD) are used in optical receivers before the signal is given to the receiver circuitry the photon is multiplied with the photocurrent and this increases the sensitivity of the receiver since photocurrent is multiplied before encountering of the thermal noise associated with the receiver circuit.

See also

edit

References

edit
  1. ^ Sze, S.M. (1981). Physics of Semiconductor Devices. John Wiley & Sons. p. 45. ISBN 0-471-05661-8.
  2. ^ Grün, E.; et al. (May 1992). "The Galileo Dust Detector". Space Science Reviews. 60 (1–4): 317-340. Bibcode:1992SSRv...60..317G. doi:10.1007/BF00216860. Retrieved 3 February 2022.
  3. ^ Srama, R.; et al. (September 2004). "The Cassini Cosmic Dust Analyzer". Space Science Reviews. 114 (1–4): 465-518. Bibcode:2004SSRv..114..465S. doi:10.1007/s11214-004-1435-z. Retrieved 3 February 2022.
  4. ^ Kempf, Sascha; et al. (May 2012). "Linear high resolution dust mass spectrometer for a mission to the Galilean satellites". Planetary and Space Science. 65 (1): 10–20. Bibcode:2012P&SS...65...10K. doi:10.1016/j.pss.2011.12.019.
edit