The Object Module Format (OMF) is an object file format used primarily for software intended to run on Intel 80x86 microprocessors. It was originally developed by Intel around 1975–1977 for ISIS-II, targeting the 8-bit 8080/8085 processors.[1][2][3][4] This variant later became known as OMF-80. As OMF-86 it was adapted to the 16-bit 8086 processor in 1978.[5]
| Filename extension | .omf, .obj |
|---|---|
| Developed by | Tool Interface Standards Committee |
| Type of format | Object file |
Version 4.0 of OMF for the 8086 family was released in 1981 under the name Relocatable Object Module Format,[6][3][4] and is perhaps best known to DOS users as an .OBJ file. Versions for the 80286 (OMF-286)[7][8] and the 32-bit 80386 processors (OMF-386)[9][10][3] were introduced in 1981 and 1985, respectively. It has since been standardized by the Tool Interface Standards Committee[11] and was also extended by Microsoft[12] and IBM (IBM-OMF). Intel also adapted the format to the 8051 microcontroller (OMF-51[13] and AOMF).
File format
editMany object file formats consist of a set of tables, such as the relocation table, which are either stored on fixed positions in the file, like the a.out format, or are pointed to by the header, like the ELF format. The "sections", code, data area, etc., are stored as contiguous areas of bytes within such files.
The Relocatable Object Module Format, however, was designed to require minimal memory when linking, and consists of a series of records that have the following format:
| Size | Contents |
|---|---|
| 1 byte | Record type, for example relocation information |
| 2 bytes | Data length (N+1) |
| N bytes | Data (varies depending on the record type) |
| 1 byte | Checksum or 0 |
There is a wide variety of record types because of consolidation of OMF variants from several vendors, and because of adding such features as 32-bit code and dynamic linking. These are important record types:
- COMENT - (88h) Comment, which may also contain control information.
- EXTDEF - (8Ch) Defines external references
- PUBDEF - (90h/91h) Identifies external symbols in this module
- SEGDEF - (98h/99h) Identifies segments
- GRPDEF - (9Ah) Identifies groups of segments, for example MS-DOS
DGROUP - FIXUPP - (9Ch/9Dh) Fixup or relocation records
- LEDATA - (A0h/A1h) Contains text of a code or data section
- COMDEF - (B0h) Uninitialized common data
- COMDAT - (C2h/C3h) Initialized common data
- MODEND - (8Ah/8Bh) Indicates end of module
There is no header containing file offsets, such as a pointer to a symbol table, in the file; a linker must completely parse the object file to extract all the information.
In the OMF format the data of one section is not necessarily stored as contiguous bytes in the file, instead it can be represented by multiple records. The file format specification (version 1.1) says that this must be done for sections larger than 1 KiB. Records containing relocation information (fixups) must be stored immediately following the data records of the section they apply to, so the section data and the relocation information is "mixed" in the file.
The file format provides special records (LIDATA) that allow compression of repeating data sequences in an object file. It also provides the possibility to store the symbol name of the entry point of the later executable file in one object file.
The file format can also be used as library file format.
Use
editThe file format is the most important object file format under DOS, 16-bit Windows, and 16-bit and 32-bit OS/2.[14][15]
Few toolchains use the 32-bit version of the OMF format. For example, the Watcom C toolchain allows generating code for targets that use 32-bit segmented memory layouts; Iron Spring PL/I can generate code for OS/2 32-bit flat memory layouts.
The Embarcadero Delphi compiler used this format when generating obj files for C++. It was the only format of object files that could be linked to a program or unit written in Object Pascal prior to version XE2 of Delphi, which introduced support of COFF format, along with 64-bit Windows target.
See also
edit- Common Object File Format (COFF)
- Executable and Linkable Format (ELF)
- a.out
- Object file
- Object Module Format (VME) (OMF as used by ICL VME)
- Object Module Format (Apple) (OMF as used by ORCA / Apple IIGS)
References
edit- ^ MCS 80/85 Absolute Object File Formats (PDF) (Technical specification). Santa Clara, California, USA: Intel Corporation. 1977. Product Number 9800183B. Archived from the original (PDF) on 2017-06-27. (16 pages)
- ^ MCS 80/85 Relocatable Object Module Formats (PDF) (Technical specification). Santa Clara, California, USA: Intel Corporation. March 1981. Product Number 121747-001. A33S/381/S00 IP. Archived (PDF) from the original on 2023-11-25. Retrieved 2023-11-25. (42 pages)
- ^ a b c Burgett, Kenneth "Ken" (2017-11-10). "Development of Intel ISIS Operating System - An interview with Ken Burgett". Archived from the original on 2023-11-24. Retrieved 2023-11-25.
A good friend of mine, Bruce, got the job of developing the Object Module Format (OMF) for the 8080, and the upcoming 8086. This piece of work would live on for years, since MS-DOS used it with little or no modifications […] It was a good piece of work and it was updated in 1985 to support the 80386 32-bit flat address mode. […] The OMF gave us a good roadmap for the design of the linker, which knitted object modules together, and the locator, which processed the relocatable code into a fixed memory image, with a defined entry point, since that was how ISIS handled load modules. The locator was also built to enable mapping of a linked module into a set of EPROM images, so they could be programmed by a prom-burner.
[1][2] - ^ a b Necasek, Michal (2020-07-25) [2020-07-09]. "How Old Is OMF?". OS/2 Museum. Archived from the original on 2023-11-25. Retrieved 2023-11-25.
- ^ External Product Specification, 8086 Object Module Formats. Intel Corporation. 1978-12-19.
- ^ "8086 Relocatable Object Module Formats" (PDF). Version 4.0. Santa Clara, California, USA: Intel Corporation. November 1981. Product Number 121748-001. ark:/13960/t07w7pz4b. Archived (PDF) from the original on 2023-11-25. Retrieved 2020-02-08. [3][4][5] (124 pages)
- ^ iAPX 286 System Builder User's Guide (PDF). Santa Clara, California, USA: Intel Corporation. September 1981. Order Number 121711-001. Archived (PDF) from the original on 2023-11-26. Retrieved 2023-11-26. [6] (90 pages)
- ^ "iAPX 286 Object Module Format". iAPX 286 Operating Systems Writer's Guide (PDF). Intel Corporation. 1983. pp. 11-10–11-11. Order Number 121960-001. Archived (PDF) from the original on 2023-11-26. Retrieved 2023-11-26. (2 of 251 pages)
- ^ Specification 386 Object Modules Format. Intel Corporation. 1991 [1990]. Order Number 482991-002.
- ^ Simple Bootloadable Files in 386 Object Modules Format. Intel Corporation. 1991 [1990]. Order Number 483164-001.
- ^ "Tool Interface Standards (TIS) Relocatable Object Module Format (OMF) Specification" (PDF). Version 1.1. TIS Committee / Unix International. May 1995 [1993, 1992]. Archived from the original (PDF) on 2020-02-07. Retrieved 2020-02-07. [7][8] (87 pages)
- ^ "The Microsoft OBJ File Format". FileFormat.Info. Archived from the original on 2023-11-25. Retrieved 2023-11-26.
- ^ External Product Specification for the MCS-51 Object Module Format (PDF). Version 5.0 Revision A. Intel Corporation. 1982-09-05. Product Number 9800183B. Document Control Center Number 481984. Archived (PDF) from the original on 2023-11-25. (24 pages) (NB. This is the version shipped with Intel's RL51 2.0 and PL/M-51 1.0. There was an earlier version X207 dated 1982-04-12.)
- ^ IBM OS/2 16/32-bit Object Module Format (OMF) and Linear eXecutable Module Format (LX) (PDF). Version 8. Boca Raton, Florida, USA: IBM Corporation. 1994-06-30 [1991, 1993]. Archived (PDF) from the original on 2023-11-26. Retrieved 2023-11-26. (v+87 pages)
- ^ IBM OS/2 16/32-bit Object Module Format (OMF) and Linear eXecutable Module Format (LX). Version/Revision 10. Boca Raton, Florida, USA: IBM Corporation. 1996-10-09 [1991]. Archived from the original on 2023-11-26. Retrieved 2023-11-26. [9] (vi+95 pages)
Further reading
edit- Levine, John R. (2000) [October 1999]. "Chapter 3: Object files". Linkers and Loaders. The Morgan Kaufmann Series in Software Engineering and Programming (1 ed.). San Francisco, California, USA: Morgan Kaufmann. ISBN 1-55860-496-0. OCLC 42413382. Archived from the original on 2013-01-25. Retrieved 2020-01-12. Code: [10][11] Errata: [12]