Wikipedia

Palouse to Cascades State Park Trail

(Redirected from John Wayne Pioneer Trail)

The Palouse to Cascades State Park Trail, formerly known as the John Wayne Pioneer Trail and the Iron Horse Trail, is a rail trail that spans most of the U.S. state of Washington. It follows the former railway roadbed of the Chicago, Milwaukee, St. Paul & Pacific Railroad (Milwaukee Road) for 300 miles (480 km) across two-thirds of the state, from the western slopes of the Cascade Mountains to the Idaho border.

Palouse to Cascades State Park Trail
Rail cut in the eastern end of the Iron Horse State Park portion of the Palouse to Cascades State Park Trail as it nears the Columbia River south of Vantage
Length285 miles (459 km)[1]
LocationWashington, United States
Established1981
UseHiking
SeasonYear-round
SurfaceGravel
Right of wayRailways
Maintained byWashington State Parks and Recreation Commission
Trail map
Map
The Saddle Mountains as seen from the Palouse to Cascades State Park Trail. Photo looking east southeasterly at Boylston tunnel

The former Milwaukee Road roadbed was acquired by the state of Washington via a quitclaim deed, and is used as a non-motorized recreational trail managed by the Washington State Parks and Recreation Commission and by the Washington State Department of Natural Resources. State legislation "railbanked" the corridor with provisions that allow for the reversion to railroad usage in the future.

History

edit

The trail was originally a railroad line which was decommissioned in 1980. Afterwards, establishing a public right-of-way trail on the land was championed by various people and organizations, especially by Chic Hollenbeck, who founded the John Wayne Pioneer Wagons and Riders Association in the 1980s. Beginning in 1981, Hollenbeck and his organization organized annual horse and wagon rides across Washington along the trail. The organization aimed to fortify the public ownership of the land, in opposition to nearby private property owners’ extralegal efforts to exert control over the land for their own use.[2][3] When it was officially established, the eastern part of the trail took on the name "John Wayne Trail" after the organization that lobbied for its existence, themselves being named after actor John Wayne, while the western 100-mile (160 km) portion from Cedar Falls (near North Bend) to the Columbia River south of Vantage was named the "Iron Horse Trail" and had been developed and managed as the Iron Horse State Park.

In 2002, it was designated a National Recreation Trail.[4]

In 2015, two Washington state representatives from the 9th district attempted to include language in an amendment to the state's 2015 capital budget that would close a 130-mile-long (210 km) section of the trail east of the Columbia River. It was later revealed that a typo, referring to the closed section as "from the Columbia River to the Columbia River", nullified the amendment temporarily.[5][6]

In April 2018, Washington State Parks proposed renaming the trail and Iron Horse State Park to resolve confusion.[7][3] Additionally, the name did not conform to the State Parks naming policies.[3] The Washington State Parks and Recreation Commission adopted a new name, the Palouse to Cascades State Park Trail, in May of that year.[8]

In April 2022, the Beverly Railroad Bridge across the Columbia River reopened to provide access for hikers, cyclists, and horse riders following the trail. The railroad trestle, south of Vantage, was renovated at a cost of $5.5 million by the state government. Other sections of the trail in Eastern Washington remain unfinished or in need of replacement.[1]

Trail features

edit
 
Army West Trailhead near Beverly, Washington

Iron Horse Park access

edit

Access points to the developed portion of the trail, managed by Washington State Parks and Recreation Commission, are at:[9]

  • Rattlesnake Lake, Cedar Falls – western terminus and connection to the Snoqualmie Valley Regional Trail
  • Twin Falls
  • Hyak – provides access to the 2.3-mile-long (3.7 km) Snoqualmie Tunnel through the crest of the Cascade Mountains. In winter this site provides a public sledding area and ski trails groomed for track and skate style cross country skiing from Hyak eastward. Washington DOT Sno-pass parking is required at this site in winter. Within walking/snowing/skiing distance is a state parks owned lodge.
  • Easton – descending the eastern slope of the Cascades
  • Cle Elum – provides access to the Upper Yakima River Canyon
  • Thorp – near the historic Thorp Mill
  • Kittitas, Washington – in the open farm valley of the Yakima River drainage east of Ellensburg, Washington
  • Army West – at the western edge of the stretch passing through the shrub-steppe country of the U.S. Army's Yakima Training Center
  • Army East – at the eastern edge of the stretch passing through the Yakima Training Center as it reaches the Columbia River

Tunnels

edit

The trail features six tunnels, including the 11,894-foot (3,625 m) Snoqualmie Tunnel, which was #50 on the railroad's numbering system. The other five tunnels in order are the Boylston (#45), Thorp (#46), Picnic Area (#47), Easton (#48) and Whittier (#49). The Boylston Tunnel was also known as the Johnson Creek tunnel to the railroad and sometimes tunnels #46 and #47 are known as the Thorp Tunnels.

Undeveloped

edit
 
The trail runs along the east side of Rock Lake in the Rock Creek drainage; the former railroad grade climbing the basalt walls of the lake can be seen

Access points to the undeveloped portion of the trail, managed by Washington State Department of Natural Resources, have not been formally opened to the public. However, the trail provides access to the unique geological erosion features of the Channeled Scablands regions of the state of Washington, and several stretches have been recognized as providing access to this area created by the cataclysmic Missoula Floods that swept periodically across eastern Washington and down the Columbia River Plateau during the Pleistocene epoch. At Malden, once home to the largest railroad turntable in the world, Washington State Parks is planning a trailhead in the former rail yard.[citation needed]

Iron Horse State Park

edit
 
Mine Creek Trestle in Iron Horse State Park near Snoqualmie Pass
 
Bridge across the Yakima River and the BNSF Railway line at Lake Easton
 
Cross-country skiing on the Iron Horse State Park trail

Iron Horse State Park, part of the Washington State Park System and the Palouse to Cascades State Park Trail, is a 1,612-acre (7 km2) state park located in the Cascade Mountains and Yakima River Valley, between Cedar Falls on the west and the Columbia River on the east.

The park is contiguous with a rail trail that crosses Snoqualmie Pass. The trail is located within the former right-of-way of The Milwaukee Road, officially the Chicago, Milwaukee, St. Paul and Pacific Railroad. Most of the right-of-way between Cedar Falls and the Idaho border was acquired by the state, through a quitclaim deed, as a result of the railroad's 1977 bankruptcy. As part of the reorganization of the company, the railroad embargoed its lines west of Miles City, Montana, in 1980 and ceased service in Washington. The state acquired the land in the early 1980s and eventually converted the right-of-way west of the Columbia River into a 110-mile (177 km) hiking, mountain biking, and horseback riding trail. The trail continues beyond Iron Horse State Park to the Idaho border.[10][11] Iron Horse State Park contains the most developed portion of the trail.

At Cedar Falls, the west end of Iron Horse State Park, the Palouse to Cascades State Park Trail connects to the Snoqualmie Valley Trail of the King County Regional Trail System.[12] The Snoqualmie Valley Trail is built on a portion of the former Milwaukee Road branch line from Cedar Falls to Everett.

Recreation

edit

Like most rails-to-trails projects, Iron Horse is popular with hikers and cyclists. There are many trail heads across the state, most with modern facilities, ample parking for a less common trail, and even a handful of campgrounds.[13]

The trail passes through mostly woodland, along lakes and waterfalls, and goes directly through the divide at the old Snoqualmie Tunnel. The park is easily accessible from I-90.

Iron Horse is popular for its scenery and its history, although it is less well-known than other nearby areas like the Alpine Lakes Wilderness or Snoqualmie Falls.

The park trail continues through the Town of South Cle Elum where the preserved Milwaukee Road depot and substation, as well as the remains of the rail yard are located. The depot, substation, and rail yard are listed in the National Register of Historic Places. There is a small museum in the depot. In Kittitas, the trail passes The Milwaukee Road depot and the ruins of one of the substations. That depot is also listed in the National Register of Historic Places. In addition to these buildings, other infrastructure remains, such as tunnels and bridges.

See also

edit

References

edit
  1. ^ a b Banse, Tom (April 12, 2022). "Riding or hiking across Washington state just got easier with new bridge over Columbia River". KUOW. Retrieved April 13, 2022.
  2. ^ "About the Palouse to Cascades Trail". John Wayne Pioneer Wagons and Riders Association. n.d. Retrieved September 3, 2021.
  3. ^ a b c Paul, Crystal (April 17, 2018). "Washington may rename the cross-state John Wayne Pioneer Trail; here's why". The Seattle Times. Retrieved September 3, 2021.
  4. ^ "John Wayne Pioneer Trail". American Trails. February 28, 2013. Archived from the original on August 9, 2014. Retrieved August 14, 2014.
  5. ^ "Typo stalls effort to close part of John Wayne Trail". Seattle Daily Journal of Commerce. Associated Press. September 24, 2015. Retrieved September 25, 2015.
  6. ^ Babcock, John (September 23, 2015). "Wording error keeps John Wayne Trail open". Moscow-Pullman Daily News. Retrieved September 25, 2015.
  7. ^ Bonar, Kayla (April 2, 2018). "State looks at renaming Iron Horse-John Wayne trail". Yakima Herald. Archived from the original on April 2, 2018. Retrieved April 14, 2018.
  8. ^ Paul, Crystal (May 17, 2018). "Former John Wayne Pioneer Trail renamed Palouse to Cascades State Park Trail". The Seattle Times. Retrieved May 17, 2018.
  9. ^ Brochure: 'Your Guide to the John Wayne Pioneer Trail – Iron Horse State Park'; Washington State Parks and Recreation Commission; undated (copy distributed at trailheads in 2008)
  10. ^ "Trails". Washington State Parks and Recreation Commission. Retrieved February 18, 2016.
  11. ^ "Iron Horse State Park". Washington State Parks and Recreation Commission. Archived from the original on February 13, 2016. Retrieved February 18, 2016.
  12. ^ "Snoqualmie Valley Trail". King County Regional Trail System. Department of Natural Resources and Parks, Parks and Recreation Division. September 19, 2005. Archived from the original on October 1, 2006. Retrieved April 21, 2006.
  13. ^ "Washington State Tour Planning and Bicycling Maps". Collection of maps and resources. WSDOT. 2006. Archived from the original (Web and PDF) on August 6, 2007. Retrieved July 3, 2007.

Bibliography

edit
edit

  Media related to John Wayne Pioneer Trail at Wikimedia Commons

47°13′45″N 117°14′59″W / 47.22917°N 117.24972°W / 47.22917; -117.24972

Retrieved from "https://en.wikipedia.org/w/index.php?title=Palouse_to_Cascades_State_Park_Trail&oldid=1257607671"