Kosambi–Karhunen–Loève theorem

(Redirected from Karhunen–Loeve transform)

In the theory of stochastic processes, the Karhunen–Loève theorem (named after Kari Karhunen and Michel Loève), also known as the Kosambi–Karhunen–Loève theorem[1][2] states that a stochastic process can be represented as an infinite linear combination of orthogonal functions, analogous to a Fourier series representation of a function on a bounded interval. The transformation is also known as Hotelling transform and eigenvector transform, and is closely related to principal component analysis (PCA) technique widely used in image processing and in data analysis in many fields.[3]

There exist many such expansions of a stochastic process: if the process is indexed over [a, b], any orthonormal basis of L2([a, b]) yields an expansion thereof in that form. The importance of the Karhunen–Loève theorem is that it yields the best such basis in the sense that it minimizes the total mean squared error.

In contrast to a Fourier series where the coefficients are fixed numbers and the expansion basis consists of sinusoidal functions (that is, sine and cosine functions), the coefficients in the Karhunen–Loève theorem are random variables and the expansion basis depends on the process. In fact, the orthogonal basis functions used in this representation are determined by the covariance function of the process. One can think that the Karhunen–Loève transform adapts to the process in order to produce the best possible basis for its expansion.

In the case of a centered stochastic process {Xt}t ∈ [a, b] (centered means E[Xt] = 0 for all t ∈ [a, b]) satisfying a technical continuity condition, X admits a decomposition

where Zk are pairwise uncorrelated random variables and the functions ek are continuous real-valued functions on [a, b] that are pairwise orthogonal in L2([a, b]). It is therefore sometimes said that the expansion is bi-orthogonal since the random coefficients Zk are orthogonal in the probability space while the deterministic functions ek are orthogonal in the time domain. The general case of a process Xt that is not centered can be brought back to the case of a centered process by considering XtE[Xt] which is a centered process.

Moreover, if the process is Gaussian, then the random variables Zk are Gaussian and stochastically independent. This result generalizes the Karhunen–Loève transform. An important example of a centered real stochastic process on [0, 1] is the Wiener process; the Karhunen–Loève theorem can be used to provide a canonical orthogonal representation for it. In this case the expansion consists of sinusoidal functions.

The above expansion into uncorrelated random variables is also known as the Karhunen–Loève expansion or Karhunen–Loève decomposition. The empirical version (i.e., with the coefficients computed from a sample) is known as the Karhunen–Loève transform (KLT), principal component analysis, proper orthogonal decomposition (POD), empirical orthogonal functions (a term used in meteorology and geophysics), or the Hotelling transform.

Formulation

edit
  • Throughout this article, we will consider a random process Xt defined over a probability space (Ω, F, P) and indexed over a closed interval [a, b], which is square-integrable, has zero-mean, and with covariance function KX(s, t). In other words, we have:
 
 
 

The square-integrable condition   is logically equivalent to   being finite for all  .[4]

 
Since TKX is a linear operator, it makes sense to talk about its eigenvalues λk and eigenfunctions ek, which are found solving the homogeneous Fredholm integral equation of the second kind
 

Statement of the theorem

edit

Theorem. Let Xt be a zero-mean square-integrable stochastic process defined over a probability space (Ω, F, P) and indexed over a closed and bounded interval [ab], with continuous covariance function KX(s, t).

Then KX(s,t) is a Mercer kernel and letting ek be an orthonormal basis on L2([a, b]) formed by the eigenfunctions of TKX with respective eigenvalues λk, Xt admits the following representation

 

where the convergence is in L2, uniform in t and

 

Furthermore, the random variables Zk have zero-mean, are uncorrelated and have variance λk

 

Note that by generalizations of Mercer's theorem we can replace the interval [a, b] with other compact spaces C and the Lebesgue measure on [a, b] with a Borel measure whose support is C.

Proof

edit
  • The covariance function KX satisfies the definition of a Mercer kernel. By Mercer's theorem, there consequently exists a set λk, ek(t) of eigenvalues and eigenfunctions of TKX forming an orthonormal basis of L2([a,b]), and KX can be expressed as
 
  • The process Xt can be expanded in terms of the eigenfunctions ek as:
 
where the coefficients (random variables) Zk are given by the projection of Xt on the respective eigenfunctions
 
  • We may then derive
 
where we have used the fact that the ek are eigenfunctions of TKX and are orthonormal.
  • Let us now show that the convergence is in L2. Let
 
Then:
 
which goes to 0 by Mercer's theorem.

Properties of the Karhunen–Loève transform

edit

Special case: Gaussian distribution

edit

Since the limit in the mean of jointly Gaussian random variables is jointly Gaussian, and jointly Gaussian random (centered) variables are independent if and only if they are orthogonal, we can also conclude:

Theorem. The variables Zi have a joint Gaussian distribution and are stochastically independent if the original process {Xt}t is Gaussian.

In the Gaussian case, since the variables Zi are independent, we can say more:

 

almost surely.

The Karhunen–Loève transform decorrelates the process

edit

This is a consequence of the independence of the Zk.

The Karhunen–Loève expansion minimizes the total mean square error

edit

In the introduction, we mentioned that the truncated Karhunen–Loeve expansion was the best approximation of the original process in the sense that it reduces the total mean-square error resulting of its truncation. Because of this property, it is often said that the KL transform optimally compacts the energy.

More specifically, given any orthonormal basis {fk} of L2([a, b]), we may decompose the process Xt as:

 

where

 

and we may approximate Xt by the finite sum

 

for some integer N.

Claim. Of all such approximations, the KL approximation is the one that minimizes the total mean square error (provided we have arranged the eigenvalues in decreasing order).

Proof

Consider the error resulting from the truncation at the N-th term in the following orthonormal expansion:

 

The mean-square error εN2(t) can be written as:

 

We then integrate this last equality over [a, b]. The orthonormality of the fk yields:

 

The problem of minimizing the total mean-square error thus comes down to minimizing the right hand side of this equality subject to the constraint that the fk be normalized. We hence introduce βk, the Lagrangian multipliers associated with these constraints, and aim at minimizing the following function:

 

Differentiating with respect to fi(t) (this is a functional derivative) and setting the derivative to 0 yields:

 

which is satisfied in particular when

 

In other words, when the fk are chosen to be the eigenfunctions of TKX, hence resulting in the KL expansion.

Explained variance

edit

An important observation is that since the random coefficients Zk of the KL expansion are uncorrelated, the Bienaymé formula asserts that the variance of Xt is simply the sum of the variances of the individual components of the sum:

 

Integrating over [a, b] and using the orthonormality of the ek, we obtain that the total variance of the process is:

 

In particular, the total variance of the N-truncated approximation is

 

As a result, the N-truncated expansion explains

 

of the variance; and if we are content with an approximation that explains, say, 95% of the variance, then we just have to determine an   such that

 

The Karhunen–Loève expansion has the minimum representation entropy property

edit

Given a representation of  , for some orthonormal basis   and random  , we let  , so that  . We may then define the representation entropy to be  . Then we have  , for all choices of  . That is, the KL-expansion has minimal representation entropy.

Proof:

Denote the coefficients obtained for the basis   as  , and for   as  .

Choose  . Note that since   minimizes the mean squared error, we have that

 

Expanding the right hand size, we get:

 

Using the orthonormality of  , and expanding   in the   basis, we get that the right hand size is equal to:

 

We may perform identical analysis for the  , and so rewrite the above inequality as:

 

Subtracting the common first term, and dividing by  , we obtain that:

 

This implies that:

 

Linear Karhunen–Loève approximations

edit

Consider a whole class of signals we want to approximate over the first M vectors of a basis. These signals are modeled as realizations of a random vector Y[n] of size N. To optimize the approximation we design a basis that minimizes the average approximation error. This section proves that optimal bases are Karhunen–Loeve bases that diagonalize the covariance matrix of Y. The random vector Y can be decomposed in an orthogonal basis

 

as follows:

 

where each

 

is a random variable. The approximation from the first MN vectors of the basis is

 

The energy conservation in an orthogonal basis implies

 

This error is related to the covariance of Y defined by

 

For any vector x[n] we denote by K the covariance operator represented by this matrix,

 

The error ε[M] is therefore a sum of the last NM coefficients of the covariance operator

 

The covariance operator K is Hermitian and Positive and is thus diagonalized in an orthogonal basis called a Karhunen–Loève basis. The following theorem states that a Karhunen–Loève basis is optimal for linear approximations.

Theorem (Optimality of Karhunen–Loève basis). Let K be a covariance operator. For all M ≥ 1, the approximation error

 

is minimum if and only if

 

is a Karhunen–Loeve basis ordered by decreasing eigenvalues.

 

Non-Linear approximation in bases

edit

Linear approximations project the signal on M vectors a priori. The approximation can be made more precise by choosing the M orthogonal vectors depending on the signal properties. This section analyzes the general performance of these non-linear approximations. A signal   is approximated with M vectors selected adaptively in an orthonormal basis for  [definition needed]

 

Let   be the projection of f over M vectors whose indices are in IM:

 

The approximation error is the sum of the remaining coefficients

 

To minimize this error, the indices in IM must correspond to the M vectors having the largest inner product amplitude

 

These are the vectors that best correlate f. They can thus be interpreted as the main features of f. The resulting error is necessarily smaller than the error of a linear approximation which selects the M approximation vectors independently of f. Let us sort

 

in decreasing order

 

The best non-linear approximation is

 

It can also be written as inner product thresholding:

 

with

 

The non-linear error is

 

this error goes quickly to zero as M increases, if the sorted values of   have a fast decay as k increases. This decay is quantified by computing the   norm of the signal inner products in B:

 

The following theorem relates the decay of ε[M] to  

Theorem (decay of error). If   with p < 2 then

 

and

 

Conversely, if   then

  for any q > p.

Non-optimality of Karhunen–Loève bases

edit

To further illustrate the differences between linear and non-linear approximations, we study the decomposition of a simple non-Gaussian random vector in a Karhunen–Loève basis. Processes whose realizations have a random translation are stationary. The Karhunen–Loève basis is then a Fourier basis and we study its performance. To simplify the analysis, consider a random vector Y[n] of size N that is random shift modulo N of a deterministic signal f[n] of zero mean

 
 

The random shift P is uniformly distributed on [0, N − 1]:

 

Clearly

 

and

 

Hence

 

Since RY is N periodic, Y is a circular stationary random vector. The covariance operator is a circular convolution with RY and is therefore diagonalized in the discrete Fourier Karhunen–Loève basis

 

The power spectrum is Fourier transform of RY:

 

Example: Consider an extreme case where  . A theorem stated above guarantees that the Fourier Karhunen–Loève basis produces a smaller expected approximation error than a canonical basis of Diracs  . Indeed, we do not know a priori the abscissa of the non-zero coefficients of Y, so there is no particular Dirac that is better adapted to perform the approximation. But the Fourier vectors cover the whole support of Y and thus absorb a part of the signal energy.

 

Selecting higher frequency Fourier coefficients yields a better mean-square approximation than choosing a priori a few Dirac vectors to perform the approximation. The situation is totally different for non-linear approximations. If   then the discrete Fourier basis is extremely inefficient because f and hence Y have an energy that is almost uniformly spread among all Fourier vectors. In contrast, since f has only two non-zero coefficients in the Dirac basis, a non-linear approximation of Y with M ≥ 2 gives zero error.[5]

Principal component analysis

edit

We have established the Karhunen–Loève theorem and derived a few properties thereof. We also noted that one hurdle in its application was the numerical cost of determining the eigenvalues and eigenfunctions of its covariance operator through the Fredholm integral equation of the second kind

 

However, when applied to a discrete and finite process  , the problem takes a much simpler form and standard algebra can be used to carry out the calculations.

Note that a continuous process can also be sampled at N points in time in order to reduce the problem to a finite version.

We henceforth consider a random N-dimensional vector  . As mentioned above, X could contain N samples of a signal but it can hold many more representations depending on the field of application. For instance it could be the answers to a survey or economic data in an econometrics analysis.

As in the continuous version, we assume that X is centered, otherwise we can let   (where   is the mean vector of X) which is centered.

Let us adapt the procedure to the discrete case.

Covariance matrix

edit

Recall that the main implication and difficulty of the KL transformation is computing the eigenvectors of the linear operator associated to the covariance function, which are given by the solutions to the integral equation written above.

Define Σ, the covariance matrix of X, as an N × N matrix whose elements are given by:

 

Rewriting the above integral equation to suit the discrete case, we observe that it turns into:

 

where   is an N-dimensional vector.

The integral equation thus reduces to a simple matrix eigenvalue problem, which explains why the PCA has such a broad domain of applications.

Since Σ is a positive definite symmetric matrix, it possesses a set of orthonormal eigenvectors forming a basis of  , and we write   this set of eigenvalues and corresponding eigenvectors, listed in decreasing values of λi. Let also Φ be the orthonormal matrix consisting of these eigenvectors:

 

Principal component transform

edit

It remains to perform the actual KL transformation, called the principal component transform in this case. Recall that the transform was found by expanding the process with respect to the basis spanned by the eigenvectors of the covariance function. In this case, we hence have:

 

In a more compact form, the principal component transform of X is defined by:

 

The i-th component of Y is  , the projection of X on   and the inverse transform X = ΦY yields the expansion of X on the space spanned by the  :

 

As in the continuous case, we may reduce the dimensionality of the problem by truncating the sum at some   such that

 

where α is the explained variance threshold we wish to set.

We can also reduce the dimensionality through the use of multilevel dominant eigenvector estimation (MDEE).[6]

Examples

edit

The Wiener process

edit

There are numerous equivalent characterizations of the Wiener process which is a mathematical formalization of Brownian motion. Here we regard it as the centered standard Gaussian process Wt with covariance function

 

We restrict the time domain to [a, b]=[0,1] without loss of generality.

The eigenvectors of the covariance kernel are easily determined. These are

 

and the corresponding eigenvalues are

 
Proof

In order to find the eigenvalues and eigenvectors, we need to solve the integral equation:

 

differentiating once with respect to t yields:

 

a second differentiation produces the following differential equation:

 

The general solution of which has the form:

 

where A and B are two constants to be determined with the boundary conditions. Setting t = 0 in the initial integral equation gives e(0) = 0 which implies that B = 0 and similarly, setting t = 1 in the first differentiation yields e' (1) = 0, whence:

 

which in turn implies that eigenvalues of TKX are:

 

The corresponding eigenfunctions are thus of the form:

 

A is then chosen so as to normalize ek:

 

This gives the following representation of the Wiener process:

Theorem. There is a sequence {Zi}i of independent Gaussian random variables with mean zero and variance 1 such that

 

Note that this representation is only valid for   On larger intervals, the increments are not independent. As stated in the theorem, convergence is in the L2 norm and uniform in t.

The Brownian bridge

edit

Similarly the Brownian bridge   which is a stochastic process with covariance function

 

can be represented as the series

 

Applications

edit

Adaptive optics systems sometimes use K–L functions to reconstruct wave-front phase information (Dai 1996, JOSA A). Karhunen–Loève expansion is closely related to the Singular Value Decomposition. The latter has myriad applications in image processing, radar, seismology, and the like. If one has independent vector observations from a vector valued stochastic process then the left singular vectors are maximum likelihood estimates of the ensemble KL expansion.

Applications in signal estimation and detection

edit

Detection of a known continuous signal S(t)

edit

In communication, we usually have to decide whether a signal from a noisy channel contains valuable information. The following hypothesis testing is used for detecting continuous signal s(t) from channel output X(t), N(t) is the channel noise, which is usually assumed zero mean Gaussian process with correlation function  

 
 

Signal detection in white noise

edit

When the channel noise is white, its correlation function is

 

and it has constant power spectrum density. In physically practical channel, the noise power is finite, so:

 

Then the noise correlation function is sinc function with zeros at   Since are uncorrelated and gaussian, they are independent. Thus we can take samples from X(t) with time spacing

 

Let  . We have a total of   i.i.d observations   to develop the likelihood-ratio test. Define signal  , the problem becomes,

 
 

The log-likelihood ratio

 

As t → 0, let:

 

Then G is the test statistics and the Neyman–Pearson optimum detector is

 

As G is Gaussian, we can characterize it by finding its mean and variances. Then we get

 
 

where

 

is the signal energy.

The false alarm error

 

And the probability of detection:

 

where Φ is the cdf of standard normal, or Gaussian, variable.

Signal detection in colored noise

edit

When N(t) is colored (correlated in time) Gaussian noise with zero mean and covariance function   we cannot sample independent discrete observations by evenly spacing the time. Instead, we can use K–L expansion to decorrelate the noise process and get independent Gaussian observation 'samples'. The K–L expansion of N(t):

 

where   and the orthonormal bases   are generated by kernel  , i.e., solution to

 

Do the expansion:

 

where  , then

 

under H and   under K. Let  , we have

  are independent Gaussian r.v's with variance  
under H:   are independent Gaussian r.v's.
 
under K:   are independent Gaussian r.v's.
 

Hence, the log-LR is given by

 

and the optimum detector is

 

Define

 

then  

How to find k(t)
edit

Since

 

k(t) is the solution to

 

If N(t)is wide-sense stationary,

 

which is known as the Wiener–Hopf equation. The equation can be solved by taking fourier transform, but not practically realizable since infinite spectrum needs spatial factorization. A special case which is easy to calculate k(t) is white Gaussian noise.

 

The corresponding impulse response is h(t) = k(T − t) = CS(T − t). Let C = 1, this is just the result we arrived at in previous section for detecting of signal in white noise.

Test threshold for Neyman–Pearson detector
edit

Since X(t) is a Gaussian process,

 

is a Gaussian random variable that can be characterized by its mean and variance.

 

Hence, we obtain the distributions of H and K:

 
 

The false alarm error is

 

So the test threshold for the Neyman–Pearson optimum detector is

 

Its power of detection is

 

When the noise is white Gaussian process, the signal power is

 
Prewhitening
edit

For some type of colored noise, a typical practise is to add a prewhitening filter before the matched filter to transform the colored noise into white noise. For example, N(t) is a wide-sense stationary colored noise with correlation function

 
 

The transfer function of prewhitening filter is

 

Detection of a Gaussian random signal in Additive white Gaussian noise (AWGN)

edit

When the signal we want to detect from the noisy channel is also random, for example, a white Gaussian process X(t), we can still implement K–L expansion to get independent sequence of observation. In this case, the detection problem is described as follows:

 
 

X(t) is a random process with correlation function  

The K–L expansion of X(t) is

 

where

 

and   are solutions to

 

So  's are independent sequence of r.v's with zero mean and variance  . Expanding Y(t) and N(t) by  , we get

 

where

 

As N(t) is Gaussian white noise,  's are i.i.d sequence of r.v with zero mean and variance  , then the problem is simplified as follows,

 
 

The Neyman–Pearson optimal test:

 

so the log-likelihood ratio is

 

Since

 

is just the minimum-mean-square estimate of   given  's,

 

K–L expansion has the following property: If

 

where

 

then

 

So let

 

Noncausal filter Q(t,s) can be used to get the estimate through

 

By orthogonality principle, Q(t,s) satisfies

 

However, for practical reasons, it's necessary to further derive the causal filter h(t,s), where h(t,s) = 0 for s > t, to get estimate  . Specifically,

 

See also

edit

Notes

edit
  1. ^ Sapatnekar, Sachin (2011), "Overcoming variations in nanometer-scale technologies", IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 1 (1): 5–18, Bibcode:2011IJEST...1....5S, CiteSeerX 10.1.1.300.5659, doi:10.1109/jetcas.2011.2138250, S2CID 15566585
  2. ^ Ghoman, Satyajit; Wang, Zhicun; Chen, PC; Kapania, Rakesh (2012). "A POD-based Reduced Order Design Scheme for Shape Optimization of Air Vehicles". Proc of 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2012-1808, Honolulu, Hawaii.
  3. ^ Karhunen–Loeve transform (KLT) Archived 2016-11-28 at the Wayback Machine, Computer Image Processing and Analysis (E161) lectures, Harvey Mudd College
  4. ^ Giambartolomei, Giordano (2016). "4 The Karhunen-Loève Theorem". The Karhunen-Loève theorem (Bachelors). University of Bologna.
  5. ^ A wavelet tour of signal processing-Stéphane Mallat
  6. ^ X. Tang, “Texture information in run-length matrices,” IEEE Transactions on Image Processing, vol. 7, No. 11, pp. 1602–1609, Nov. 1998

References

edit
  • Stark, Henry; Woods, John W. (1986). Probability, Random Processes, and Estimation Theory for Engineers. Prentice-Hall, Inc. ISBN 978-0-13-711706-2. OL 21138080M.
  • Ghanem, Roger; Spanos, Pol (1991). Stochastic finite elements: a spectral approach. Springer-Verlag. ISBN 978-0-387-97456-9. OL 1865197M.
  • Guikhman, I.; Skorokhod, A. (1977). Introduction a la Théorie des Processus Aléatoires. Éditions MIR.
  • Simon, B. (1979). Functional Integration and Quantum Physics. Academic Press.
  • Karhunen, Kari (1947). "Über lineare Methoden in der Wahrscheinlichkeitsrechnung". Ann. Acad. Sci. Fennicae. Ser. A I. Math.-Phys. 37: 1–79.
  • Loève, M. (1978). Probability theory Vol. II. Graduate Texts in Mathematics. Vol. 46 (4 ed.). Springer-Verlag. ISBN 978-0-387-90262-3.
  • Dai, G. (1996). "Modal wave-front reconstruction with Zernike polynomials and Karhunen–Loeve functions". JOSA A. 13 (6): 1218. Bibcode:1996JOSAA..13.1218D. doi:10.1364/JOSAA.13.001218.
  • Wu B., Zhu J., Najm F.(2005) "A Non-parametric Approach for Dynamic Range Estimation of Nonlinear Systems". In Proceedings of Design Automation Conference(841-844) 2005
  • Wu B., Zhu J., Najm F.(2006) "Dynamic Range Estimation". IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 25 Issue:9 (1618–1636) 2006
  • Jorgensen, Palle E. T.; Song, Myung-Sin (2007). "Entropy Encoding, Hilbert Space and Karhunen–Loeve Transforms". Journal of Mathematical Physics. 48 (10): 103503. arXiv:math-ph/0701056. Bibcode:2007JMP....48j3503J. doi:10.1063/1.2793569. S2CID 17039075.
edit