Landing lights are lights, mounted on aircraft, that illuminate the terrain and runway ahead during takeoff and landing, as well as being used as a collision avoidance measure against other aircraft and bird strikes. Landing lights must be activated when the aircraft is under 10,000 feet in altitude.
Overview
edit.jpg)
Almost all modern aircraft are equipped with landing lights if approved for nighttime operations. Landing lights are usually of very high intensity, because of the considerable distance that may separate an aircraft from terrain or obstacles. The landing lights of large aircraft can easily be seen by other aircraft over 100 miles away.
Key considerations of landing light design include intensity, reliability, weight, and power consumption. Ideal landing lights are extremely intense, require little electrical power, are lightweight, and have long and predictable service lives. Past and present technologies include ordinary incandescent lamps, halogen lamps, various forms of arc lamps and discharge lamps, and LED lamps.
_of_the_Polish_Air_Force_arrives_Fairford_7Jul2016_arp.jpg)
_rp.jpg)
Landing lights are typically only useful as visibility aids to the pilots when the aircraft is very low and close to terrain, as during take-off and landing. Landing lights are usually extinguished in cruise flight, especially if atmospheric conditions are likely to make the lights reflect or glare back into the eyes of the pilots. However, the brightness of landing lights makes them useful for increasing the visibility of an aircraft to other pilots, and so pilots are often encouraged to keep their landing lights on while below certain altitudes or in crowded airspace. Some aircraft (especially business jets) have lights that— when not needed to directly illuminate the ground—can operate in a flashing mode to enhance visibility to other aircraft. One convention is for commercial aircraft to turn on their landing lights when changing flight levels. Landing lights are sometimes used in emergencies to communicate with ground personnel or other aircraft, especially if other means of communication are not available (radio failures and the like). Additionally, landing lights have at times been installed as a vehicle high beam in the hot rod scene, although this is not legal.
Legal considerations
editIn many jurisdictions, landing light fixtures and the lamps they use must be certified for use in a given aircraft by a government authority. The use of the landing light may be required or forbidden by local regulations, depending on a variety of factors such as the local time, weather, or flight operations.
In the United States, for example, landing lights are not required or used for many types of aircraft, but their use is strongly encouraged, both for take-off and landing and during any operations below 10,000 feet (3,000 m) or within ten nautical miles (19 km) of an airport (FAA AIM 4-3-23). According to CFR 14 and FAR Part 91.205, a landing light is required for all aircraft used in commercial operations at night.
Landing lights may not be lit when taxiing or near an airport gate; this can cause flash blindness to ground crew and other pilots.
See also
edit
References
edit
- Federal Aviation Administration (U.S.), Aeronautical Information Manual, FAA, March 2007
- Federal Aviation Administration (U.S.), Airplane Flying Handbook (FAA-H-8083-3A), FAA, 2004
- Federal Aviation Administration (U.S.), Air Traffic Control (Order 7110.65R), February 16, FAA, 2006
- Federal Aviation Administration (U.S.), Instrument Procedures Handbook (FAA-H-8261-1), FAA, 2004
- Federal Aviation Administration (U.S.), Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25), FAA, 2003
- Murphy, Kevin D. and Bell, Leisha, "Airspace for Everyone," Safety Advisor, Regulations 1 (SA02-9/05), AOPA Air Safety Association, September 2005
- Jim Clark. "Headlights Part 3: Choosing and Mounting Them". hotrodhotline.com.