In mathematics, Legendre polynomials, named after Adrien-Marie Legendre (1782), are a system of complete and orthogonal polynomials with a wide number of mathematical properties and numerous applications. They can be defined in many ways, and the various definitions highlight different aspects as well as suggest generalizations and connections to different mathematical structures and physical and numerical applications.
Closely related to the Legendre polynomials are associated Legendre polynomials, Legendre functions, Legendre functions of the second kind, big q-Legendre polynomials, and associated Legendre functions.
Definition and representation
editDefinition by construction as an orthogonal system
editIn this approach, the polynomials are defined as an orthogonal system with respect to the weight function over the interval . That is, is a polynomial of degree , such that
With the additional standardization condition , all the polynomials can be uniquely determined. We then start the construction process: is the only correctly standardized polynomial of degree 0. must be orthogonal to , leading to , and is determined by demanding orthogonality to and , and so on. is fixed by demanding orthogonality to all with . This gives conditions, which, along with the standardization fixes all coefficients in . With work, all the coefficients of every polynomial can be systematically determined, leading to the explicit representation in powers of given below.
This definition of the 's is the simplest one. It does not appeal to the theory of differential equations. Second, the completeness of the polynomials follows immediately from the completeness of the powers 1, . Finally, by defining them via orthogonality with respect to the Lebesgue measure on , it sets up the Legendre polynomials as one of the three classical orthogonal polynomial systems. The other two are the Laguerre polynomials, which are orthogonal over the half line with the weight , and the Hermite polynomials, orthogonal over the full line with weight .
Definition via generating function
editThe Legendre polynomials can also be defined as the coefficients in a formal expansion in powers of of the generating function[1]
(2) |
The coefficient of is a polynomial in of degree with . Expanding up to gives Expansion to higher orders gets increasingly cumbersome, but is possible to do systematically, and again leads to one of the explicit forms given below.
It is possible to obtain the higher 's without resorting to direct expansion of the Taylor series, however. Equation 2 is differentiated with respect to t on both sides and rearranged to obtain Replacing the quotient of the square root with its definition in Eq. 2, and equating the coefficients of powers of t in the resulting expansion gives Bonnet’s recursion formula This relation, along with the first two polynomials P0 and P1, allows all the rest to be generated recursively.
The generating function approach is directly connected to the multipole expansion in electrostatics, as explained below, and is how the polynomials were first defined by Legendre in 1782.
Definition via differential equation
editA third definition is in terms of solutions to Legendre's differential equation:
(1) |
This differential equation has regular singular points at x = ±1 so if a solution is sought using the standard Frobenius or power series method, a series about the origin will only converge for |x| < 1 in general. When n is an integer, the solution Pn(x) that is regular at x = 1 is also regular at x = −1, and the series for this solution terminates (i.e. it is a polynomial). The orthogonality and completeness of these solutions is best seen from the viewpoint of Sturm–Liouville theory. We rewrite the differential equation as an eigenvalue problem, with the eigenvalue in lieu of . If we demand that the solution be regular at , the differential operator on the left is Hermitian. The eigenvalues are found to be of the form n(n + 1), with and the eigenfunctions are the . The orthogonality and completeness of this set of solutions follows at once from the larger framework of Sturm–Liouville theory.
The differential equation admits another, non-polynomial solution, the Legendre functions of the second kind . A two-parameter generalization of (Eq. 1) is called Legendre's general differential equation, solved by the Associated Legendre polynomials. Legendre functions are solutions of Legendre's differential equation (generalized or not) with non-integer parameters.
In physical settings, Legendre's differential equation arises naturally whenever one solves Laplace's equation (and related partial differential equations) by separation of variables in spherical coordinates. From this standpoint, the eigenfunctions of the angular part of the Laplacian operator are the spherical harmonics, of which the Legendre polynomials are (up to a multiplicative constant) the subset that is left invariant by rotations about the polar axis. The polynomials appear as where is the polar angle. This approach to the Legendre polynomials provides a deep connection to rotational symmetry. Many of their properties which are found laboriously through the methods of analysis — for example the addition theorem — are more easily found using the methods of symmetry and group theory, and acquire profound physical and geometrical meaning.
Rodrigues' formula and other explicit formulas
editAn especially compact expression for the Legendre polynomials is given by Rodrigues' formula:
This formula enables derivation of a large number of properties of the 's. Among these are explicit representations such as Expressing the polynomial as a power series, , the coefficients of powers of can also be calculated using a general formula: The Legendre polynomial is determined by the values used for the two constants and , where if is odd and if is even.[2]
In the fourth representation, stands for the largest integer less than or equal to . The last representation, which is also immediate from the recursion formula, expresses the Legendre polynomials by simple monomials and involves the generalized form of the binomial coefficient.
The first few Legendre polynomials are:
0 | |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 |
The graphs of these polynomials (up to n = 5) are shown below:
Main properties
editOrthogonality
editThe standardization fixes the normalization of the Legendre polynomials (with respect to the L2 norm on the interval −1 ≤ x ≤ 1). Since they are also orthogonal with respect to the same norm, the two statements[clarification needed] can be combined into the single equation, (where δmn denotes the Kronecker delta, equal to 1 if m = n and to 0 otherwise). This normalization is most readily found by employing Rodrigues' formula, given below.
Completeness
editThat the polynomials are complete means the following. Given any piecewise continuous function with finitely many discontinuities in the interval [−1, 1], the sequence of sums converges in the mean to as , provided we take
This completeness property underlies all the expansions discussed in this article, and is often stated in the form with −1 ≤ x ≤ 1 and −1 ≤ y ≤ 1.
Applications
editExpanding an inverse distance potential
editThe Legendre polynomials were first introduced in 1782 by Adrien-Marie Legendre[3] as the coefficients in the expansion of the Newtonian potential where r and r′ are the lengths of the vectors x and x′ respectively and γ is the angle between those two vectors. The series converges when r > r′. The expression gives the gravitational potential associated to a point mass or the Coulomb potential associated to a point charge. The expansion using Legendre polynomials might be useful, for instance, when integrating this expression over a continuous mass or charge distribution.
Legendre polynomials occur in the solution of Laplace's equation of the static potential, ∇2 Φ(x) = 0, in a charge-free region of space, using the method of separation of variables, where the boundary conditions have axial symmetry (no dependence on an azimuthal angle). Where ẑ is the axis of symmetry and θ is the angle between the position of the observer and the ẑ axis (the zenith angle), the solution for the potential will be
Al and Bl are to be determined according to the boundary condition of each problem.[4]
They also appear when solving the Schrödinger equation in three dimensions for a central force.
In multipole expansions
editLegendre polynomials are also useful in expanding functions of the form (this is the same as before, written a little differently): which arise naturally in multipole expansions. The left-hand side of the equation is the generating function for the Legendre polynomials.
As an example, the electric potential Φ(r,θ) (in spherical coordinates) due to a point charge located on the z-axis at z = a (see diagram right) varies as
If the radius r of the observation point P is greater than a, the potential may be expanded in the Legendre polynomials where we have defined η = a/r < 1 and x = cos θ. This expansion is used to develop the normal multipole expansion.
Conversely, if the radius r of the observation point P is smaller than a, the potential may still be expanded in the Legendre polynomials as above, but with a and r exchanged. This expansion is the basis of interior multipole expansion.
In trigonometry
editThe trigonometric functions cos nθ, also denoted as the Chebyshev polynomials Tn(cos θ) ≡ cos nθ, can also be multipole expanded by the Legendre polynomials Pn(cos θ). The first several orders are as follows:
Another property is the expression for sin (n + 1)θ, which is
In recurrent neural networks
editA recurrent neural network that contains a d-dimensional memory vector, , can be optimized such that its neural activities obey the linear time-invariant system given by the following state-space representation:
In this case, the sliding window of across the past units of time is best approximated by a linear combination of the first shifted Legendre polynomials, weighted together by the elements of at time :
When combined with deep learning methods, these networks can be trained to outperform long short-term memory units and related architectures, while using fewer computational resources.[5]
Additional properties
editLegendre polynomials have definite parity. That is, they are even or odd,[6] according to
Another useful property is which follows from considering the orthogonality relation with . It is convenient when a Legendre series is used to approximate a function or experimental data: the average of the series over the interval [−1, 1] is simply given by the leading expansion coefficient .
Since the differential equation and the orthogonality property are independent of scaling, the Legendre polynomials' definitions are "standardized" (sometimes called "normalization", but the actual norm is not 1) by being scaled so that
The derivative at the end point is given by
The Askey–Gasper inequality for Legendre polynomials reads
The Legendre polynomials of a scalar product of unit vectors can be expanded with spherical harmonics using where the unit vectors r and r′ have spherical coordinates (θ, φ) and (θ′, φ′), respectively.
The product of two Legendre polynomials [7] where is the complete elliptic integral of the first kind.
Recurrence relations
editAs discussed above, the Legendre polynomials obey the three-term recurrence relation known as Bonnet's recursion formula given by and or, with the alternative expression, which also holds at the endpoints
Useful for the integration of Legendre polynomials is
From the above one can see also that or equivalently where ‖Pn‖ is the norm over the interval −1 ≤ x ≤ 1
Asymptotics
editAsymptotically, for , the Legendre polynomials can be written as [8] and for arguments of magnitude greater than 1[9] where J0, J1, and I0 are Bessel functions.
Zeros
editAll zeros of are real, distinct from each other, and lie in the interval . Furthermore, if we regard them as dividing the interval into subintervals, each subinterval will contain exactly one zero of . This is known as the interlacing property. Because of the parity property it is evident that if is a zero of , so is . These zeros play an important role in numerical integration based on Gaussian quadrature. The specific quadrature based on the 's is known as Gauss-Legendre quadrature.
From this property and the facts that , it follows that has local minima and maxima in . Equivalently, has zeros in .
Pointwise evaluations
editThe parity and normalization implicate the values at the boundaries to be At the origin one can show that the values are given by
Variants with transformed argument
editShifted Legendre polynomials
editThe shifted Legendre polynomials are defined as Here the "shifting" function x ↦ 2x − 1 is an affine transformation that bijectively maps the interval [0, 1] to the interval [−1, 1], implying that the polynomials P̃n(x) are orthogonal on [0, 1]:
An explicit expression for the shifted Legendre polynomials is given by
The analogue of Rodrigues' formula for the shifted Legendre polynomials is
The first few shifted Legendre polynomials are:
0 | |
1 | |
2 | |
3 | |
4 | |
5 |
Legendre rational functions
editThe Legendre rational functions are a sequence of orthogonal functions on [0, ∞). They are obtained by composing the Cayley transform with Legendre polynomials.
A rational Legendre function of degree n is defined as:
They are eigenfunctions of the singular Sturm–Liouville problem: with eigenvalues
See also
editNotes
edit- ^ Arfken & Weber 2005, p.743
- ^ Boas, Mary L. (2006). Mathematical methods in the physical sciences (3rd ed.). Hoboken, NJ: Wiley. ISBN 978-0-471-19826-0.
- ^ Legendre, A.-M. (1785) [1782]. "Recherches sur l'attraction des sphéroïdes homogènes" (PDF). Mémoires de Mathématiques et de Physique, présentés à l'Académie Royale des Sciences, par divers savans, et lus dans ses Assemblées (in French). Vol. X. Paris. pp. 411–435. Archived from the original (PDF) on 2009-09-20.
- ^ Jackson, J. D. (1999). Classical Electrodynamics (3rd ed.). Wiley & Sons. p. 103. ISBN 978-0-471-30932-1.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Voelker, Aaron R.; Kajić, Ivana; Eliasmith, Chris (2019). Legendre Memory Units: Continuous-Time Representation in Recurrent Neural Networks (PDF). Advances in Neural Information Processing Systems.
- ^ Arfken & Weber 2005, p.753
- ^ Leonard C. Maximon (1957). "A generating function for the product of two Legendre polynomials". Norske Videnskabers Selskab Forhandlinger. 29: 82–86.
- ^ Szegő, Gábor (1975). Orthogonal polynomials (4th ed.). Providence: American Mathematical Society. pp. 194 (Theorem 8.21.2). ISBN 0821810235. OCLC 1683237.
- ^ "DLMF: 14.15 Uniform Asymptotic Approximations".
References
edit- Abramowitz, Milton; Stegun, Irene Ann, eds. (1983) [June 1964]. "Chapter 8". Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables. Applied Mathematics Series. Vol. 55 (Ninth reprint with additional corrections of tenth original printing with corrections (December 1972); first ed.). Washington D.C.; New York: United States Department of Commerce, National Bureau of Standards; Dover Publications. pp. 332, 773. ISBN 978-0-486-61272-0. LCCN 64-60036. MR 0167642. LCCN 65-12253. See also chapter 22.
- Arfken, George B.; Weber, Hans J. (2005). Mathematical Methods for Physicists. Elsevier Academic Press. ISBN 0-12-059876-0.
- Bayin, S. S. (2006). Mathematical Methods in Science and Engineering. Wiley. ch. 2. ISBN 978-0-470-04142-0.
- Belousov, S. L. (1962). Tables of Normalized Associated Legendre Polynomials. Mathematical Tables. Vol. 18. Pergamon Press. ISBN 978-0-08-009723-7.
- Courant, Richard; Hilbert, David (1953). Methods of Mathematical Physics. Vol. 1. New York, NY: Interscience. ISBN 978-0-471-50447-4.
- Dunster, T. M. (2010), "Legendre and Related Functions", in Olver, Frank W. J.; Lozier, Daniel M.; Boisvert, Ronald F.; Clark, Charles W. (eds.), NIST Handbook of Mathematical Functions, Cambridge University Press, ISBN 978-0-521-19225-5, MR 2723248.
- El Attar, Refaat (2009). Legendre Polynomials and Functions. CreateSpace. ISBN 978-1-4414-9012-4.
- Koornwinder, Tom H.; Wong, Roderick S. C.; Koekoek, Roelof; Swarttouw, René F. (2010), "Orthogonal Polynomials", in Olver, Frank W. J.; Lozier, Daniel M.; Boisvert, Ronald F.; Clark, Charles W. (eds.), NIST Handbook of Mathematical Functions, Cambridge University Press, ISBN 978-0-521-19225-5, MR 2723248.
External links
edit- A quick informal derivation of the Legendre polynomial in the context of the quantum mechanics of hydrogen
- "Legendre polynomials", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
- Wolfram MathWorld entry on Legendre polynomials
- Dr James B. Calvert's article on Legendre polynomials from his personal collection of mathematics
- The Legendre Polynomials by Carlyle E. Moore
- Legendre Polynomials from Hyperphysics