Wikipedia

Drug design

(Redirected from Ligand design)
Not to be confused with Designer drug.

Drug design, often referred to as rational drug design or simply rational design, is the inventive process of finding new medications based on the knowledge of a biological target.[1] The drug is most commonly an organic small molecule that activates or inhibits the function of a biomolecule such as a protein, which in turn results in a therapeutic benefit to the patient. In the most basic sense, drug design involves the design of molecules that are complementary in shape and charge to the biomolecular target with which they interact and therefore will bind to it. Drug design frequently but not necessarily relies on computer modeling techniques.[2] This type of modeling is sometimes referred to as computer-aided drug design. Finally, drug design that relies on the knowledge of the three-dimensional structure of the biomolecular target is known as structure-based drug design.[2] In addition to small molecules, biopharmaceuticals including peptides[3][4] and especially therapeutic antibodies are an increasingly important class of drugs and computational methods for improving the affinity, selectivity, and stability of these protein-based therapeutics have also been developed.[5]

Drug discovery cycle schematic

Definition

edit

The phrase "drug design" is similar to ligand design (i.e., design of a molecule that will bind tightly to its target).[6] Although design techniques for prediction of binding affinity are reasonably successful, there are many other properties, such as bioavailability, metabolic half-life, and side effects, that first must be optimized before a ligand can become a safe and effictive drug. These other characteristics are often difficult to predict with rational design techniques.

Due to high attrition rates, especially during clinical phases of drug development, more attention is being focused early in the drug design process on selecting candidate drugs whose physicochemical properties are predicted to result in fewer complications during development and hence more likely to lead to an approved, marketed drug.[7] Furthermore, in vitro experiments complemented with computation methods are increasingly used in early drug discovery to select compounds with more favorable ADME (absorption, distribution, metabolism, and excretion) and toxicological profiles.[8]

Drug targets

edit

A biomolecular target (most commonly a protein or a nucleic acid) is a key molecule involved in a particular metabolic or signaling pathway that is associated with a specific disease condition or pathology or to the infectivity or survival of a microbial pathogen. Potential drug targets are not necessarily disease causing but must by definition be disease modifying.[9] In some cases, small molecules will be designed to enhance or inhibit the target function in the specific disease modifying pathway. Small molecules (for example receptor agonists, antagonists, inverse agonists, or modulators; enzyme activators or inhibitors; or ion channel openers or blockers)[10] will be designed that are complementary to the binding site of target.[11] Small molecules (drugs) can be designed so as not to affect any other important "off-target" molecules (often referred to as antitargets) since drug interactions with off-target molecules may lead to undesirable side effects.[12] Due to similarities in binding sites, closely related targets identified through sequence homology have the highest chance of cross reactivity and hence highest side effect potential.

Most commonly, drugs are organic small molecules produced through chemical synthesis, but biopolymer-based drugs (also known as biopharmaceuticals) produced through biological processes are becoming increasingly more common.[13] In addition, mRNA-based gene silencing technologies may have therapeutic applications.[14] For example, nanomedicines based on mRNA can streamline and expedite the drug development process, enabling transient and localized expression of immunostimulatory molecules.[15] In vitro transcribed (IVT) mRNA allows for delivery to various accessible cell types via the blood or alternative pathways. The use of IVT mRNA serves to convey specific genetic information into a person's cells, with the primary objective of preventing or altering a particular disease.[16]

Drug discovery

edit

Phenotypic drug discovery

edit

Phenotypic drug discovery is a traditional drug discovery method, also known as forward pharmacology or classical pharmacology. It uses the process of phenotypic screening on collections of synthetic small molecules, natural products, or extracts within chemical libraries to pinpoint substances exhibiting beneficial therapeutic effects. This method is to first discover the in vivo or in vitro functional activity of drugs (such as extract drugs or natural products), and then perform target identification. Phenotypic discovery uses a practical and target-independent approach to generate initial leads, aiming to discover pharmacologically active compounds and therapeutics that operate through novel drug mechanisms.[17] This method allows the exploration of disease phenotypes to find potential treatments for conditions with unknown, complex, or multifactorial origins, where the understanding of molecular targets is insufficient for effective intervention.[18]

Rational drug discovery

edit

Rational drug design (also called reverse pharmacology) begins with a hypothesis that modulation of a specific biological target may have therapeutic value. In order for a biomolecule to be selected as a drug target, two essential pieces of information are required. The first is evidence that modulation of the target will be disease modifying. This knowledge may come from, for example, disease linkage studies that show an association between mutations in the biological target and certain disease states.[19] The second is that the target is capable of binding to a small molecule and that its activity can be modulated by the small molecule.[20]

Once a suitable target has been identified, the target is normally cloned and produced and purified. The purified protein is then used to establish a screening assay. In addition, the three-dimensional structure of the target may be determined.

The search for small molecules that bind to the target is begun by screening libraries of potential drug compounds. This may be done by using the screening assay (a "wet screen"). In addition, if the structure of the target is available, a virtual screen may be performed of candidate drugs. Ideally, the candidate drug compounds should be "drug-like", that is they should possess properties that are predicted to lead to oral bioavailability, adequate chemical and metabolic stability, and minimal toxic effects.[21] Several methods are available to estimate druglikeness such as Lipinski's Rule of Five and a range of scoring methods such as lipophilic efficiency.[22] Several methods for predicting drug metabolism have also been proposed in the scientific literature.[23]

Due to the large number of drug properties that must be simultaneously optimized during the design process, multi-objective optimization techniques are sometimes employed.[24] Finally because of the limitations in the current methods for prediction of activity, drug design is still very much reliant on serendipity[25] and bounded rationality.[26]

Computer-aided drug design

edit

The most fundamental goal in drug design is to predict whether a given molecule will bind to a target and if so how strongly. Molecular mechanics or molecular dynamics is most often used to estimate the strength of the intermolecular interaction between the small molecule and its biological target. These methods are also used to predict the conformation of the small molecule and to model conformational changes in the target that may occur when the small molecule binds to it.[3][4] Semi-empirical, ab initio quantum chemistry methods, or density functional theory are often used to provide optimized parameters for the molecular mechanics calculations and also provide an estimate of the electronic properties (electrostatic potential, polarizability, etc.) of the drug candidate that will influence binding affinity.[27]

Molecular mechanics methods may also be used to provide semi-quantitative prediction of the binding affinity. Also, knowledge-based scoring function may be used to provide binding affinity estimates. These methods use linear regression, machine learning, neural nets or other statistical techniques to derive predictive binding affinity equations by fitting experimental affinities to computationally derived interaction energies between the small molecule and the target.[28][29]

Ideally, the computational method will be able to predict affinity before a compound is synthesized and hence in theory only one compound needs to be synthesized, saving enormous time and cost. The reality is that present computational methods are imperfect and provide, at best, only qualitatively accurate estimates of affinity. In practice, it requires several iterations of design, synthesis, and testing before an optimal drug is discovered. Computational methods have accelerated discovery by reducing the number of iterations required and have often provided novel structures.[30][31]

Computer-aided drug design may be used at any of the following stages of drug discovery:

  1. hit identification using virtual screening (structure- or ligand-based design)
  2. hit-to-lead optimization of affinity and selectivity (structure-based design, QSAR, etc.)
  3. lead optimization of other pharmaceutical properties while maintaining affinity
 
Flowchart of a Usual Clustering Analysis for Structure-Based Drug Design

In order to overcome the insufficient prediction of binding affinity calculated by recent scoring functions, the protein-ligand interaction and compound 3D structure information are used for analysis. For structure-based drug design, several post-screening analyses focusing on protein-ligand interaction have been developed for improving enrichment and effectively mining potential candidates:

  • Consensus scoring[32][33]
    • Selecting candidates by voting of multiple scoring functions
    • May lose the relationship between protein-ligand structural information and scoring criterion
  • Cluster analysis[34][35]
    • Represent and cluster candidates according to protein-ligand 3D information
    • Needs meaningful representation of protein-ligand interactions.

Types

edit
 
Drug discovery cycle highlighting both ligand-based (indirect) and structure-based (direct) drug design strategies.

There are two major types of drug design. The first is referred to as ligand-based drug design and the second, structure-based drug design.[2]

Ligand-based

edit

Ligand-based drug design (or indirect drug design) relies on knowledge of other molecules that bind to the biological target of interest. These other molecules may be used to derive a pharmacophore model that defines the minimum necessary structural characteristics a molecule must possess in order to bind to the target.[36] A model of the biological target may be built based on the knowledge of what binds to it, and this model in turn may be used to design new molecular entities that interact with the target. Alternatively, a quantitative structure-activity relationship (QSAR), in which a correlation between calculated properties of molecules and their experimentally determined biological activity, may be derived. These QSAR relationships in turn may be used to predict the activity of new analogs.[37]

Structure-based

edit

Structure-based drug design (or direct drug design) relies on knowledge of the three dimensional structure of the biological target obtained through methods such as x-ray crystallography or NMR spectroscopy.[38] If an experimental structure of a target is not available, it may be possible to create a homology model of the target based on the experimental structure of a related protein. Using the structure of the biological target, candidate drugs that are predicted to bind with high affinity and selectivity to the target may be designed using interactive graphics and the intuition of a medicinal chemist. Alternatively, various automated computational procedures may be used to suggest new drug candidates.[39]

Current methods for structure-based drug design can be divided roughly into three main categories.[40] The first method is identification of new ligands for a given receptor by searching large databases of 3D structures of small molecules to find those fitting the binding pocket of the receptor using fast approximate docking programs. This method is known as virtual screening.

A second category is de novo design of new ligands. In this method, ligand molecules are built up within the constraints of the binding pocket by assembling small pieces in a stepwise manner. These pieces can be either individual atoms or molecular fragments. The key advantage of such a method is that novel structures, not contained in any database, can be suggested.[41][42][43] A third method is the optimization of known ligands by evaluating proposed analogs within the binding cavity.[40]

Binding site identification

edit

Binding site identification is the first step in structure based design.[20][44] If the structure of the target or a sufficiently similar homolog is determined in the presence of a bound ligand, then the ligand should be observable in the structure in which case location of the binding site is trivial. However, there may be unoccupied allosteric binding sites that may be of interest. Furthermore, it may be that only apoprotein (protein without ligand) structures are available and the reliable identification of unoccupied sites that have the potential to bind ligands with high affinity is non-trivial. In brief, binding site identification usually relies on identification of concave surfaces on the protein that can accommodate drug sized molecules that also possess appropriate "hot spots" (hydrophobic surfaces, hydrogen bonding sites, etc.) that drive ligand binding.[20][44]

Scoring functions

edit
Main article: Scoring functions for docking

Structure-based drug design attempts to use the structure of proteins as a basis for designing new ligands by applying the principles of molecular recognition. Selective high affinity binding to the target is generally desirable since it leads to more efficacious drugs with fewer side effects. Thus, one of the most important principles for designing or obtaining potential new ligands is to predict the binding affinity of a certain ligand to its target (and known antitargets) and use the predicted affinity as a criterion for selection.[45]

One early general-purposed empirical scoring function to describe the binding energy of ligands to receptors was developed by Böhm.[46][47] This empirical scoring function took the form:

 

where:

  • ΔG0 – empirically derived offset that in part corresponds to the overall loss of translational and rotational entropy of the ligand upon binding.
  • ΔGhb – contribution from hydrogen bonding
  • ΔGionic – contribution from ionic interactions
  • ΔGlip – contribution from lipophilic interactions where |Alipo| is surface area of lipophilic contact between the ligand and receptor
  • ΔGrot – entropy penalty due to freezing a rotatable in the ligand bond upon binding

A more general thermodynamic "master" equation is as follows:[48]

 

where:

  • desolvation – enthalpic penalty for removing the ligand from solvent
  • motion – entropic penalty for reducing the degrees of freedom when a ligand binds to its receptor
  • configuration – conformational strain energy required to put the ligand in its "active" conformation
  • interaction – enthalpic gain for "resolvating" the ligand with its receptor

The basic idea is that the overall binding free energy can be decomposed into independent components that are known to be important for the binding process. Each component reflects a certain kind of free energy alteration during the binding process between a ligand and its target receptor. The Master Equation is the linear combination of these components. According to Gibbs free energy equation, the relation between dissociation equilibrium constant, Kd, and the components of free energy was built.

Various computational methods are used to estimate each of the components of the master equation. For example, the change in polar surface area upon ligand binding can be used to estimate the desolvation energy. The number of rotatable bonds frozen upon ligand binding is proportional to the motion term. The configurational or strain energy can be estimated using molecular mechanics calculations. Finally the interaction energy can be estimated using methods such as the change in non polar surface, statistically derived potentials of mean force, the number of hydrogen bonds formed, etc. In practice, the components of the master equation are fit to experimental data using multiple linear regression. This can be done with a diverse training set including many types of ligands and receptors to produce a less accurate but more general "global" model or a more restricted set of ligands and receptors to produce a more accurate but less general "local" model.[49]

Examples

edit

A particular example of rational drug design involves the use of three-dimensional information about biomolecules obtained from such techniques as X-ray crystallography and NMR spectroscopy. Computer-aided drug design in particular becomes much more tractable when there is a high-resolution structure of a target protein bound to a potent ligand. This approach to drug discovery is sometimes referred to as structure-based drug design. The first unequivocal example of the application of structure-based drug design leading to an approved drug is the carbonic anhydrase inhibitor dorzolamide, which was approved in 1995.[50][51]

Another case study in rational drug design is imatinib, a tyrosine kinase inhibitor designed specifically for the bcr-abl fusion protein that is characteristic for Philadelphia chromosome-positive leukemias (chronic myelogenous leukemia and occasionally acute lymphocytic leukemia). Imatinib is substantially different from previous drugs for cancer, as most agents of chemotherapy simply target rapidly dividing cells, not differentiating between cancer cells and other tissues.[52]

Additional examples include:

Drug screening

edit

Types of drug screening include phenotypic screening, high-throughput screening, and virtual screening. Phenotypic screening is characterized by the process of screening drugs using cellular or animal disease models to identify compounds that alter the phenotype and produce beneficial disease-related effects.[54][55] Emerging technologies in high-throughput screening substantially enhance processing speed and decrease the required detection volume.[56] Virtual screening is completed by computer, enabling a large number of molecules can be screened with a short cycle and low cost. Virtual screening uses a range of computational methods that empower chemists to reduce extensive virtual libraries into more manageable sizes.[57]

Case studies

edit

Criticism

edit

It has been argued that the highly rigid and focused nature of rational drug design suppresses serendipity in drug discovery.[58]

See also

edit

References

edit
  1. ^ Madsen U, Krogsgaard-Larsen P, Liljefors T (2002). Textbook of Drug Design and Discovery. Washington, D.C.: Taylor & Francis. ISBN 978-0-415-28288-8.
  2. ^ a b c Reynolds CH, Merz KM, Ringe D, eds. (2010). Drug Design: Structure- and Ligand-Based Approaches (1 ed.). Cambridge, UK: Cambridge University Press. ISBN 978-0521887236.
  3. ^ a b Fosgerau K, Hoffmann T (January 2015). "Peptide therapeutics: current status and future directions". Drug Discovery Today. 20 (1): 122–128. doi:10.1016/j.drudis.2014.10.003. PMID 25450771.
  4. ^ a b Ciemny M, Kurcinski M, Kamel K, Kolinski A, Alam N, Schueler-Furman O, Kmiecik S (August 2018). "Protein-peptide docking: opportunities and challenges". Drug Discovery Today. 23 (8): 1530–1537. doi:10.1016/j.drudis.2018.05.006. PMID 29733895.
  5. ^ Shirai H, Prades C, Vita R, Marcatili P, Popovic B, Xu J, et al. (November 2014). "Antibody informatics for drug discovery". Biochimica et Biophysica Acta (BBA) - Proteins and Proteomics. 1844 (11): 2002–2015. doi:10.1016/j.bbapap.2014.07.006. PMID 25110827.
  6. ^ Tollenaere JP (April 1996). "The role of structure-based ligand design and molecular modelling in drug discovery". Pharmacy World & Science. 18 (2): 56–62. doi:10.1007/BF00579706. PMID 8739258. S2CID 21550508.
  7. ^ Waring MJ, Arrowsmith J, Leach AR, Leeson PD, Mandrell S, Owen RM, et al. (July 2015). "An analysis of the attrition of drug candidates from four major pharmaceutical companies". Nature Reviews. Drug Discovery. 14 (7): 475–486. doi:10.1038/nrd4609. PMID 26091267. S2CID 25292436.
  8. ^ Yu H, Adedoyin A (September 2003). "ADME-Tox in drug discovery: integration of experimental and computational technologies". Drug Discovery Today. 8 (18): 852–861. doi:10.1016/S1359-6446(03)02828-9. PMID 12963322.
  9. ^ Dixon SJ, Stockwell BR (December 2009). "Identifying druggable disease-modifying gene products". Current Opinion in Chemical Biology. 13 (5–6): 549–555. doi:10.1016/j.cbpa.2009.08.003. PMC 2787993. PMID 19740696.
  10. ^ Imming P, Sinning C, Meyer A (October 2006). "Drugs, their targets and the nature and number of drug targets". Nature Reviews. Drug Discovery. 5 (10): 821–834. doi:10.1038/nrd2132. PMID 17016423. S2CID 8872470.
  11. ^ Anderson AC (September 2003). "The process of structure-based drug design". Chemistry & Biology. 10 (9): 787–797. doi:10.1016/j.chembiol.2003.09.002. PMID 14522049.
  12. ^ Recanatini M, Bottegoni G, Cavalli A (December 2004). "In silico antitarget screening". Drug Discovery Today: Technologies. 1 (3): 209–215. doi:10.1016/j.ddtec.2004.10.004. PMID 24981487.
  13. ^ Wu-Pong S, Rojanasakul Y (2008). Biopharmaceutical drug design and development (2nd ed.). Totowa, NJ Humana Press: Humana Press. ISBN 978-1-59745-532-9.
  14. ^ Scomparin A, Polyak D, Krivitsky A, Satchi-Fainaro R (November 2015). "Achieving successful delivery of oligonucleotides--From physico-chemical characterization to in vivo evaluation". Biotechnology Advances. 33 (6 Pt 3): 1294–1309. doi:10.1016/j.biotechadv.2015.04.008. PMID 25916823.
  15. ^ Youssef M, Hitti C, Puppin Chaves Fulber J, Kamen AA (October 2023). "Enabling mRNA Therapeutics: Current Landscape and Challenges in Manufacturing". Biomolecules. 13 (10): 1497. doi:10.3390/biom13101497. PMC 10604719. PMID 37892179.
  16. ^ Sahin U, Karikó K, Türeci Ö (October 2014). "mRNA-based therapeutics--developing a new class of drugs". Nature Reviews. Drug Discovery. 13 (10): 759–780. doi:10.1038/nrd4278. PMID 25233993. S2CID 27454546.
  17. ^ Swinney DC, Lee JA (2020). "Recent advances in phenotypic drug discovery". F1000Research. 9: F1000 Faculty Rev–944. doi:10.12688/f1000research.25813.1. PMC 7431967. PMID 32850117.
  18. ^ Moffat JG, Vincent F, Lee JA, Eder J, Prunotto M (August 2017). "Opportunities and challenges in phenotypic drug discovery: an industry perspective". Nature Reviews. Drug Discovery. 16 (8): 531–543. doi:10.1038/nrd.2017.111. PMID 28685762. S2CID 6180139.
  19. ^ Ganellin CR, Jefferis R, Roberts SM (2013). "The small molecule drug discovery process — from target selection to candidate selection". Introduction to Biological and Small Molecule Drug Research and Development: theory and case studies. Elsevier. ISBN 9780123971760.
  20. ^ a b c Yuan Y, Pei J, Lai L (Dec 2013). "Binding site detection and druggability prediction of protein targets for structure-based drug design". Current Pharmaceutical Design. 19 (12): 2326–2333. doi:10.2174/1381612811319120019. PMID 23082974.
  21. ^ Rishton GM (January 2003). "Nonleadlikeness and leadlikeness in biochemical screening". Drug Discovery Today. 8 (2): 86–96. doi:10.1016/s1359644602025722. PMID 12565011.
  22. ^ Hopkins AL (2011). "Chapter 25: Pharmacological space". In Wermuth CG (ed.). The Practice of Medicinal Chemistry (3 ed.). Academic Press. pp. 521–527. ISBN 978-0-12-374194-3.
  23. ^ Kirchmair J (2014). Drug Metabolism Prediction. Wiley's Methods and Principles in Medicinal Chemistry. Vol. 63. Wiley-VCH. ISBN 978-3-527-67301-8.
  24. ^ Nicolaou CA, Brown N (September 2013). "Multi-objective optimization methods in drug design". Drug Discovery Today: Technologies. 10 (3): e427–e435. doi:10.1016/j.ddtec.2013.02.001. PMID 24050140.
  25. ^ Ban TA (2006). "The role of serendipity in drug discovery". Dialogues in Clinical Neuroscience. 8 (3): 335–344. doi:10.31887/DCNS.2006.8.3/tban. PMC 3181823. PMID 17117615.
  26. ^ Ethiraj SK, Levinthal D (Sep 2004). "Bounded Rationality and the Search for Organizational Architecture: An Evolutionary Perspective on the Design of Organizations and Their Evolvability". Administrative Science Quarterly. 49 (3). Sage Publications, Inc. on behalf of the Johnson Graduate School of Management, Cornell University: 404–437. doi:10.2307/4131441. JSTOR 4131441. S2CID 142910916. SSRN 604123.
  27. ^ Lewis RA (2011). "Chapter 4: The Development of Molecular Modelling Programs: The Use and Limitations of Physical Models". In Gramatica P, Livingstone DJ, Davis AM (eds.). Drug Design Strategies: Quantitative Approaches. RSC Drug Discovery. Royal Society of Chemistry. pp. 88–107. doi:10.1039/9781849733410-00088. ISBN 978-1849731669.
  28. ^ Rajamani R, Good AC (May 2007). "Ranking poses in structure-based lead discovery and optimization: current trends in scoring function development". Current Opinion in Drug Discovery & Development. 10 (3): 308–315. PMID 17554857.
  29. ^ de Azevedo WF, Dias R (December 2008). "Computational methods for calculation of ligand-binding affinity". Current Drug Targets. 9 (12): 1031–1039. doi:10.2174/138945008786949405. PMID 19128212.
  30. ^ Singh J, Chuaqui CE, Boriack-Sjodin PA, Lee WC, Pontz T, Corbley MJ, et al. (December 2003). "Successful shape-based virtual screening: the discovery of a potent inhibitor of the type I TGFbeta receptor kinase (TbetaRI)". Bioorganic & Medicinal Chemistry Letters. 13 (24): 4355–4359. doi:10.1016/j.bmcl.2003.09.028. PMID 14643325.
  31. ^ Becker OM, Dhanoa DS, Marantz Y, Chen D, Shacham S, Cheruku S, et al. (June 2006). "An integrated in silico 3D model-driven discovery of a novel, potent, and selective amidosulfonamide 5-HT1A agonist (PRX-00023) for the treatment of anxiety and depression". Journal of Medicinal Chemistry. 49 (11): 3116–3135. doi:10.1021/jm0508641. PMID 16722631.
  32. ^ Liang S, Meroueh SO, Wang G, Qiu C, Zhou Y (May 2009). "Consensus scoring for enriching near-native structures from protein-protein docking decoys". Proteins. 75 (2): 397–403. doi:10.1002/prot.22252. PMC 2656599. PMID 18831053.
  33. ^ Oda A, Tsuchida K, Takakura T, Yamaotsu N, Hirono S (2006). "Comparison of consensus scoring strategies for evaluating computational models of protein-ligand complexes". Journal of Chemical Information and Modeling. 46 (1): 380–391. doi:10.1021/ci050283k. PMID 16426072.
  34. ^ Deng Z, Chuaqui C, Singh J (January 2004). "Structural interaction fingerprint (SIFt): a novel method for analyzing three-dimensional protein-ligand binding interactions". Journal of Medicinal Chemistry. 47 (2): 337–344. doi:10.1021/jm030331x. PMID 14711306.
  35. ^ Amari S, Aizawa M, Zhang J, Fukuzawa K, Mochizuki Y, Iwasawa Y, et al. (2006). "VISCANA: visualized cluster analysis of protein-ligand interaction based on the ab initio fragment molecular orbital method for virtual ligand screening". Journal of Chemical Information and Modeling. 46 (1): 221–230. doi:10.1021/ci050262q. PMID 16426058.
  36. ^ Guner OF (2000). Pharmacophore Perception, Development, and use in Drug Design. La Jolla, Calif: International University Line. ISBN 978-0-9636817-6-8.
  37. ^ Tropsha A (2010). "QSAR in Drug Discovery". In Reynolds CH, Merz KM, Ringe D (eds.). Drug Design: Structure- and Ligand-Based Approaches (1st ed.). Cambridge, UK: Cambridge University Press. pp. 151–164. ISBN 978-0521887236.
  38. ^ Leach AR, Harren J (2007). Structure-based Drug Discovery. Berlin: Springer. ISBN 978-1-4020-4406-9.
  39. ^ Mauser H, Guba W (May 2008). "Recent developments in de novo design and scaffold hopping". Current Opinion in Drug Discovery & Development. 11 (3): 365–374. PMID 18428090.
  40. ^ a b Klebe G (2000). "Recent developments in structure-based drug design". Journal of Molecular Medicine. 78 (5): 269–281. doi:10.1007/s001090000084. PMID 10954199. S2CID 21314020.
  41. ^ Wang R, Gao Y, Lai L (2000). "LigBuilder: A Multi-Purpose Program for Structure-Based Drug Design". Journal of Molecular Modeling. 6 (7–8): 498–516. doi:10.1007/s0089400060498. S2CID 59482623.
  42. ^ Schneider G, Fechner U (August 2005). "Computer-based de novo design of drug-like molecules". Nature Reviews. Drug Discovery. 4 (8): 649–663. doi:10.1038/nrd1799. PMID 16056391. S2CID 2549851.
  43. ^ Jorgensen WL (March 2004). "The many roles of computation in drug discovery". Science. 303 (5665): 1813–1818. Bibcode:2004Sci...303.1813J. doi:10.1126/science.1096361. PMID 15031495. S2CID 1307935.
  44. ^ a b Leis S, Schneider S, Zacharias M (2010). "In silico prediction of binding sites on proteins". Current Medicinal Chemistry. 17 (15): 1550–1562. doi:10.2174/092986710790979944. PMID 20166931.
  45. ^ Warren GL, Warren SD (2011). "Chapter 16: Scoring Drug-Receptor Interactions". In Gramatica P, Livingstone DJ, Davis AM (eds.). Drug Design Strategies: Quantitative Approaches. RSC Drug Discovery. Royal Society of Chemistry. pp. 440–457. doi:10.1039/9781849733410-00440. ISBN 978-1849731669.
  46. ^ Böhm HJ (June 1994). "The development of a simple empirical scoring function to estimate the binding constant for a protein-ligand complex of known three-dimensional structure". Journal of Computer-Aided Molecular Design. 8 (3): 243–256. Bibcode:1994JCAMD...8..243B. doi:10.1007/BF00126743. PMID 7964925. S2CID 2491616.
  47. ^ Liu J, Wang R (March 2015). "Classification of current scoring functions". Journal of Chemical Information and Modeling. 55 (3): 475–482. doi:10.1021/ci500731a. PMID 25647463.
  48. ^ Murcko MA (December 1995). "Computational methods to predict binding free energy in ligand-receptor complexes". Journal of Medicinal Chemistry. 38 (26): 4953–4967. doi:10.1021/jm00026a001. PMID 8544170.
  49. ^ Gramatica P (2011). "Chapter 17: Modeling Chemicals in the Environment". In Gramatica P, Livingstone DJ, Davis AM (eds.). Drug Design Strategies: Quantitative Approaches. RSC Drug Discovery. Royal Society of Chemistry. p. 466. doi:10.1039/9781849733410-00458. ISBN 978-1849731669.
  50. ^ Greer J, Erickson JW, Baldwin JJ, Varney MD (April 1994). "Application of the three-dimensional structures of protein target molecules in structure-based drug design". Journal of Medicinal Chemistry. 37 (8): 1035–1054. doi:10.1021/jm00034a001. PMID 8164249.
  51. ^ Timmerman H, Gubernator K, Böhm HJ, Mannhold R, Kubinyi H (1998). Structure-based Ligand Design (Methods and Principles in Medicinal Chemistry). Weinheim: Wiley-VCH. ISBN 978-3-527-29343-8.
  52. ^ Capdeville R, Buchdunger E, Zimmermann J, Matter A (July 2002). "Glivec (STI571, imatinib), a rationally developed, targeted anticancer drug". Nature Reviews. Drug Discovery. 1 (7): 493–502. doi:10.1038/nrd839. PMID 12120256. S2CID 2728341.
  53. ^ "AutoDock's role in Developing the First Clinically-Approved HIV Integrase Inhibitor". Press Release. The Scripps Research Institute. 2007-12-17.
  54. ^ Prior M, Chiruta C, Currais A, Goldberg J, Ramsey J, Dargusch R, et al. (July 2014). "Back to the future with phenotypic screening". ACS Chemical Neuroscience. 5 (7): 503–513. doi:10.1021/cn500051h. PMC 4102969. PMID 24902068.
  55. ^ Kotz J (April 2012). "Phenotypic screening, take two". Science-Business EXchange. 5 (15): 380. doi:10.1038/scibx.2012.380. ISSN 1945-3477. S2CID 72519717.
  56. ^ Hertzberg RP, Pope AJ (August 2000). "High-throughput screening: new technology for the 21st century". Current Opinion in Chemical Biology. 4 (4): 445–451. doi:10.1016/S1367-5931(00)00110-1. PMID 10959774.
  57. ^ Walters WP, Stahl MT, Murcko MA (April 1998). "Virtual screening—an overview". Drug Discovery Today. 3 (4): 160–178. doi:10.1016/S1359-6446(97)01163-X.
  58. ^ Klein DF (March 2008). "The loss of serendipity in psychopharmacology". JAMA. 299 (9): 1063–1065. doi:10.1001/jama.299.9.1063. PMID 18319418.
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=Drug_design&oldid=1250748281"