Jonker JS-1 Revelation

The Jonker JS-1 Revelation is a glider built of glass-fibre, carbon fibre and Kevlar. It is available with an 18-metre span for the 18 metre class or a 21-metre span for the Open class. The manufacturer is Jonker Sailplanes of Potchefstroom South Africa, founded in 2004 by two brothers, Attie and Uys Jonker. The structural and chief designer is Attie Jonker, while the airfoil and main aerodynamic features were developed by Johan Bosman in co-operation with the Delft University of Technology.

JS-1 Revelation
General information
TypeHigh performance Sailplane
National originSouth Africa
ManufacturerJonker Sailplanes
Number built100[1] (as of 2015)
History
First flight12 December 2006

18 metre versions

edit
 
Jonker JS-1 Revelation in flight over Żar mountain

The wing has full-span flaperons, an elliptical planform and uses winglets. It is in 4 pieces, each tip is 1.5 metres. Two novel features are:

  • a double-hole blowing/suction system in the wings to minimise drag. The two rows of blow holes on the lower surface prevent turbulent flow at specific locations for different flap settings, thus reducing drag
  • a jet engine for the self-sustaining version. A self-launching version was considered but it was decided that the fuselage would require extensive structural modification.

The first flight of the JS-1 was on 12 December 2006. Series production then started and up to July 2012 about 34 had been produced[2]

Attie Jonker won the 18 metre class South African National Championship in 2008 with a JS-1 Revelation.

21 metre version

edit

A new version, JS1C-21m, with 3 metre wing-tips, which increase the span to 21 metres, has been developed. The first flight was on 22 March 2012. Because of the higher wing loads and increased maximum take-off mass of 720 kg (increased from 600 kg), the wing/wingtip junction has been redesigned including stronger wing spar caps and thicker wing-tip spars. All future JS1 Revelations will be compatible with the optional 21m wing-tips.

The new wing-tips have water tanks each with a capacity of 17 litres of ballast which can be jettisoned separately from the main wing and fin tanks.

Theoretical performance gives a claimed best glide of around 1:60 and, with the maximum wing loading of 58.7 kg/m2 and the polar remaining flat at high cruise speeds, the manufacturers state that it is competitive at the highest level with other Open Class gliders. The results (2nd, 3rd and three other places in the top ten in the 2014 World Gliding Championships Open Class[Notes 1]) supports this assertion.[3]

EASA certification

edit

The JS1-C is certificated in Europe by M&D Flugzeugbau as the JS-MD Single, with a retractable MD-TJ42 turbojet engine mounted behind the cockpit. [4]

Variants

edit
JS-1
18 meter wingspan prototypes
JS-1B
18 meter wingspan 18 metre class competition glider, production version.
JS-1C
21 meter wingspan Open class competition glider

Specifications (JS-1B)

edit

General characteristics

  • Crew: One
  • Length: 7.17 m (23 ft 6 in)
  • Wingspan: 18 m (59 ft 1 in)
  • Aspect ratio: 28.8
  • Airfoil: JS-02-127 T12 with 6 variations along wing
  • Empty weight: 280 kg (617 lb)
  • Gross weight: 600 kg (1,323 lb)
  • Water ballast: 200 kg (441 lb)

Performance

  • Maximum speed: 290 km/h (180 mph, 160 kn)
  • Stall speed: 75 km/h (47 mph, 40 kn)
  • Max rough air speed - 198 km/h (123 mph)
  • Rate of sink: 0.50 m/s (100 ft/min)
  • Lift-to-drag: 53
  • Wing loading: 31.2 kg/m2 (6.4 lb/sq ft) - 53.6 kg/m2 (10.9 lb/sqft)

See also

edit

Related development

Aircraft of comparable role, configuration, and era

Related lists

Notes

edit
  1. ^ Note that maximal take off mass of JC-1C's (720kg) was significantly lower than the class limit of 850kg, placing JC-1C's at a theoretical disadvantage

References

edit
  1. ^ Jonker Sailplanes Archived 2017-02-27 at the Wayback Machine retrieved on 07 Jan 2016
  2. ^ "Jonker web-site". Archived from the original on 16 May 2017. Retrieved 2 June 2013.
  3. ^ Official results of 2014 FAI World Gliding Championships in Leszno, Poland;retrieved on 13 Aug 2014
  4. ^ "Type Certificate Data Sheet EASA.A.616 JS-MD Single" (PDF). European Aviation Safety Agency. 1 June 2017.
edit