| name | Republic of the Congo | |||
|---|---|---|---|---|
| border coordinates | ||||
| 3.736 | ||||
| 10.29 | ←↕→ | 19.126 | ||
| -5.76 | ||||
| map center | 1°00′43″S 14°42′29″E / 1.012°S 14.708°E | |||
| image | Congo location map.svg
| |||
| ||||
| image1 | Congo physical map.svg
| |||
| ||||
Module:Location map/data/Republic of the Congo is a location map definition used to overlay markers and labels on an equirectangular projection map of Republic of the Congo. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Republic of the Congo":
{{Location map|Republic of the Congo |...}}{{Location map many|Republic of the Congo |...}}{{Location map+|Republic of the Congo |...}}{{Location map~|Republic of the Congo |...}}
Map definition
name = Republic of the Congo- Name used in the default map caption
image = Congo location map.svg- The default map image, without "Image:" or "File:"
image1 = Congo physical map.svg- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
top = 3.736- Latitude at top edge of map, in decimal degrees
bottom = -5.76- Latitude at bottom edge of map, in decimal degrees
left = 10.29- Longitude at left edge of map, in decimal degrees
right = 19.126- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 8.836 degrees.
- At an image width of 200 pixels, that is 0.0442 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0088 degrees per pixel.
Latitude: from North to South this map definition covers 9.496 degrees.
- At an image height of 200 pixels, that is 0.0475 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0095 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Republic of the Congo
| width = 250
| lat_deg = -4.27
| lon_deg = 15.29
| label = Brazzaville
}}
Location map many, using relief map (image1)
{{Location map many | Republic of the Congo
| relief = yes
| width = 250
| caption = Locations in the Republic of the Congo
| lat1_deg = -4.27
| lon1_deg = 15.29
| label1 = Brazzaville
| lat2_deg = 1.63
| lon2_deg = 18.07
| label2 = Impfondo
}}
Location map+, using AlternativeMap
{{Location map+ | Republic of the Congo
| AlternativeMap = Congo physical map.svg
| width = 250
| caption = Locations in the Republic of the Congo
| places =
{{Location map~ | Republic of the Congo
| lat_deg = -4.27
| lon_deg = 15.29
| label = Brazzaville
}}
{{Location map~ | Republic of the Congo
| lat_deg = 1.63
| lon_deg = 18.07
| label = Impfondo
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels
Creating new map definitions