Wikipedia

His-tag

(Redirected from Polyhistidine fusion protein)

A polyhistidine-tag, best known by the trademarked name His-tag, is an amino acid motif in proteins that typically consists of at least six histidine (His) residues, often at the N- or C-terminus of the protein. It is also known as a hexa histidine-tag, 6xHis-tag, or His6 tag. The tag was invented by Roche,[1] although the use of histidines and its vectors are distributed by Qiagen. Various purification kits for histidine-tagged proteins are commercially available from multiple companies.[2]

A simple gravity flow column for Ni2+-affinity chromatography. The sample and subsequent buffers are manually poured into the column and collected at the bottom end after flowing through the resin bed (in light blue at the base of the column).

The total number of histidine residues may vary in the tag from as low as two, to as high as 10 or more His residues. N- or C-terminal His-tags may also be followed or preceded, respectively, by a suitable amino acid sequence that facilitates removal of the polyhistidine-tag using endopeptidases. This extra sequence is not necessary if exopeptidases are used to remove N-terminal His-tags (e.g., Qiagen TAGZyme). Furthermore, exopeptidase cleavage may solve the unspecific cleavage observed when using endoprotease-based tag removal. Polyhistidine-tags are often used for affinity purification of genetically modified proteins.

Principle

edit
 
Three views of the X-ray structure of Ni(NTA)(H2O)2 [citation needed]

Proteins can coordinate metal ions on their surface and it is possible to separate proteins using chromatography by making use of the difference in their affinity to metal ions. This is termed as immobilized metal ion affinity chromatography (IMAC), as originally introduced in 1975 under the name metal chelate affinity chromatography.[3] Subsequent studies have revealed that among amino acids constituting proteins, histidine is strongly involved in the coordination complex with metal ions.[4] Therefore, if a number of histidines are added to the end of the protein, the affinity of the protein for the metal ion is increased and this can be exploited to selectively isolate the protein of interest. When a protein with a His-tag is brought into contact with a carrier on which a metal ion such as nickel is immobilized, the histidine residue chelates the metal ion and binds to the carrier. Since other proteins do not bind to the carrier or bind only very weakly, they can be removed by washing the carrier with an appropriate buffer. The poly-histidine tagged protein can then be recovered by eluting it off the resin.[5]

Practical choices

edit

Tag length

edit
 
Examples of methods for adding polyhistidine tags. (A) The polyhistidine tag is added by inserting the DNA encoding a protein of interest in a vector that has the tag ready to fuse at the C-terminus. (B) The polyhistidine tag is added using primers containing the tag coding sequence as an overhang on the forward primer. After PCR amplification, the tag is present on the N-terminus of the gene, which can then be sub-cloned into an expression vector.

Polyhistidine tags most commonly consist of six histidine residues. Tags with up to twelve histidine residues or dual tags attached via short linker are not uncommon though and may improve purification results by enhancing binding to the affinity resin, allowing for increased stringency of washing and separation from endogenous proteins.[6][7][8] The tag can be added to a gene of interest using methods common to most purification tags. The most basic method is to subclone the gene of interest into a vector containing a polyhistidine tag sequence. Many vectors for use with various expression systems are available with polyhistidine tags in a variety of positions and with differing protease cleavage sites, other tags etc.[9] However, if an appropriate vector is unavailable or the tag needs to be inserted at a location other than the proteins N- or C-terminus, the gene of interest can be either directly synthesised containing a polyhistidine tag sequence or various methods based on PCR can be used to add the tag to a gene. A common approach is to add the coding sequence for the polyhistidine tag to the PCR primers as an overhang.[10][11]

Tag position

edit

Most commonly, a polyhistidine tag is fused at the N-terminus or C-terminus of a protein and is attached via a short flexible linker, which may contain a protease cleavage site.[10][9] Less commonly, tags can be added at both the N- and C-termini or inserted at an intermediate part of a protein, such as within an exposed loop.[12][8] The choice of tag position depends on the properties of each protein and the chosen purification strategy; it may be necessary to test multiple constructs with the tag at different positions.[6][10] Although polyhistidine tags are considered to typically not alter the properties of a protein, it has been demonstrated that addition of the tag can cause unwanted effects, such as influencing the protein's oligomeric state.[13]

Carrier matrices

edit

Various carrier matrices bound to a solid resin support are on the market and these can be subsequently charged with a metal cation. Derivatives of iminodiacetic acid (IDA) and nitrilotriacetic acid (NTA) are most frequently used for this purpose, with differing matrices having certain advantages and disadvantages for various applications.[14]

Metal ions

edit

Several metal cations have high affinities for imidazole, the functional group of the His-tag. Divalent cation M2+ (M = Mn, Fe, Co, Ni, Cu, Zn etc) transition metal imidazole complexes are most frequently used for this purpose. The choice of cation is generally a compromise between binding capacity and purity. Nickel is often used as it offers a good balance between these factors, while cobalt can be used when it is desired to increase the purity of purification as it has less affinity for endogenous proteins; binding capacity however is lower compared with nickel.[14][10]

Elution method

edit

In order to elute His-tagged protein from the carrier there are several potential methods, which can be used in combination if necessary. In order to avoid denaturation of proteins, it is generally desirable to use as mild a method as possible.

  • Competition with analogs

For releasing the His-tagged protein from the carrier, a compound is used that has a structure similar to the His-tag and which also forms a coordination complex with the immobilized metal ions. Such a compound added to the His-tagged protein on the carrier competes with the protein for the immobilized metal ions. The compound added at high concentration replaces virtually all carrier-bound protein which is thus eluted from the carrier. Imidazole is the side chain of histidine and is typically used at a concentration of 150 - 500 mM for elution. Histidine or histamine can also be used.

  • Decrease in pH

When the pH decreases, the histidine residue is protonated and can no longer coordinate the metal tag, allowing the protein to be eluted. When nickel is used as the metal ion, it is eluted at around pH 4 and cobalt at around pH 6.

  • Removal of metal ions

When a strong chelating agent such as EDTA is added, the protein is detached from the carrier because the metal ion immobilized on the carrier is lost.

Applications

edit

Protein purification

edit

Polyhistidine-tags are often used for affinity purification of polyhistidine-tagged recombinant proteins expressed in Escherichia coli or other expression systems. Typically, cells are harvested via centrifugation and the resulting cell pellet lysed either by physical means or by means of detergents and enzymes such as lysozyme or any combination of these. At this stage, the lysate contains the recombinant protein among many endogenous proteins originating from the host cells. The lysate is exposed to affinity resin bound to a carrier matrix coupled with a divalent cation, either by direct addition of resin (batch binding) or by passing over a resin bed in a column format. The resin is then washed with buffer to remove proteins that do not specifically interact with bound cation and the protein of interest is eluted off the resin using buffer containing a high concentration of imidazole or a lowered pH. The purity and amount of protein can be assessed by methods such SDS-PAGE and Western blotting.[14][10][15]

Affinity purification using a polyhistidine-tag usually results in relatively pure protein. Protein purity can be improved by the addition of a low (20-40 mM) concentration of imidazole to the binding and/or wash buffers. However, depending on the requirements of the downstream application, further purification steps using methods such as ion exchange or size exclusion chromatography may be required. IMAC resins typically retain several prominent endogenous proteins as impurities. In E. coli for instance, a prominent example is FKBP-type peptidyl prolyl isomerase, which appears around 25 kDa on SDS-PAGE. These impurities can be eliminated using additional purification steps or by expressing the recombinant protein in a deficient strain of cells. Alternatively, cobalt charged IMAC resins which have less affinity for endogenous proteins can be used.[16][10][14][17]

Binding assays

edit

Polyhistidine-tagging can be used to detect protein-protein interactions in the same way as a pull-down assay. Polyhistidine tagging has several advantages over other tags commonly used for pull-down assays, including its small size, few naturally occurring proteins binding to the carrier matrices and the increased stability of the carrier matrix over monoclonal antibody matrices.[18]

Fluorescent tags

edit

Hexahistadine CyDye tags have been developed, which use nickel covalent coordination to EDTA groups attached to fluorophores in order to create dyes that attach to the polyhistidine tag. This technique has been shown to be useful for following protein migration and trafficking and may be effective for measuring distance via Förster resonance energy transfer.[19]

Fluorohistidine tags

edit

A polyfluorohistidine tag has been reported for use in in vitro translation systems.[20] In this system, an expanded genetic code is used in which histidine is replaced by 4-fluorohistidine. The fluorinated analog is incorporated into peptides via the relaxed substrate specificity of histidine-tRNA ligase and lowers the overall pKa of the tag. This allows for the selective enrichment of polyfluorohistidine tagged peptides in the presence of complex mixtures of traditional polyhistidine tags by altering the pH of the wash buffers.[citation needed]

Detection

edit

The polyhistidine-tag can also be used for detecting a protein via anti-polyhistidine-tag antibodies, which can be useful for subcellular localization, ELISA, western blotting and other immuno-analytical methods. Alternatively, in-gel staining of SDS-PAGE or native-PAGE gels with fluorescent probes bearing metal ions can be used for detection of a polyhistidine tagged protein.[21]

Similar tags

edit

HQ tag

edit

The HQ tag has alternating histidine and glutamine (HQHQHQ).

HN tag

edit

The HN tag has alternating histidine and asparagine (HNHNHNHNHNHN) and is more likely to be presented on the protein surface than Histidine-only tags. The HN tag binds to the immobilized metal ion more efficiently than the His tag.[22]

HAT tag

edit

The HAT tag is a peptide tag (KDHLIHNVHKEEHAHAHNK) derived from chicken lactate dehydrogenase, and is more likely to be a soluble protein with no bias in charge distribution compared to the His tag.[23] The arrangement of histidines in the HAT tag allows high accessibility compared to the His tag, and it binds efficiently to the immobilized metal ion.

See also

edit

References

edit
  1. ^ Hochuli E, Bannwarth W, Döbeli H, Gentz R, Stüber D (1988). "Genetic Approach to Facilitate Purification of Recombinant Proteins with a Novel Metal Chelate Adsorbent". Bio/Technology. 6 (11): 1321–5. doi:10.1038/nbt1188-1321. S2CID 9518666. INIST 7229670.
  2. ^ The use of the tag for academic users was unrestricted; however, commercial users had to pay royalties to Roche. The original patent expired on 11 Feb 2003, and is now public property; current claims to royalties are based on a much narrower set of more recent patents. Suitable tag sequences are available free for commercial use.
  3. ^ Porath J, Carlsson J, Olsson I, Belfrage G (December 1975). "Metal chelate affinity chromatography, a new approach to protein fractionation". Nature. 258 (5536): 598–599. Bibcode:1975Natur.258..598P. doi:10.1038/258598a0. PMID 1678. S2CID 4271836.
  4. ^ Porath J (August 1992). "Immobilized metal ion affinity chromatography". Protein Expression and Purification. 3 (4): 263–281. doi:10.1016/1046-5928(92)90001-D. PMID 1422221.
  5. ^ "His-tag: The timeless standard for protein purification". Cube Biotech Knowledge Site. Archived from the original on 2 December 2021. Retrieved December 2, 2021.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  6. ^ a b Mohanty AK, Wiener MC (February 2004). "Membrane protein expression and production: effects of polyhistidine tag length and position". Protein Expression and Purification. 33 (2): 311–325. doi:10.1016/j.pep.2003.10.010. PMID 14711520.
  7. ^ Grisshammer R, Tucker J (October 1997). "Quantitative evaluation of neurotensin receptor purification by immobilized metal affinity chromatography". Protein Expression and Purification. 11 (1): 53–60. doi:10.1006/prep.1997.0766. PMID 9325139.
  8. ^ a b Khan F, He M, Taussig MJ (May 2006). "Double-hexahistidine tag with high-affinity binding for protein immobilization, purification, and detection on ni-nitrilotriacetic acid surfaces". Analytical Chemistry. 78 (9): 3072–3079. doi:10.1021/ac060184l. PMID 16642995.
  9. ^ a b Singh MI, Jain V (2013-05-15). "Tagging the expressed protein with 6 histidines: rapid cloning of an amplicon with three options". PLOS ONE. 8 (5): e63922. Bibcode:2013PLoSO...863922S. doi:10.1371/journal.pone.0063922. PMC 3655076. PMID 23691118.
  10. ^ a b c d e f Bornhorst JA, Falke JJ (2000-01-01). "Purification of proteins using polyhistidine affinity tags". Applications of Chimeric Genes and Hybrid Proteins Part A: Gene Expression and Protein Purification. Methods in Enzymology. Vol. 326. Academic Press. pp. 245–254. doi:10.1016/s0076-6879(00)26058-8. ISBN 978-0-12-182227-9. PMC 2909483. PMID 11036646.
  11. ^ Hughes RA, Ellington AD (January 2017). "Synthetic DNA Synthesis and Assembly: Putting the Synthetic in Synthetic Biology". Cold Spring Harbor Perspectives in Biology. 9 (1): a023812. doi:10.1101/cshperspect.a023812. PMC 5204324. PMID 28049645.
  12. ^ Paul DM, Beuron F, Sessions RB, Brancaccio A, Bigotti MG (February 2016). "Internal (His)₆-tagging delivers a fully functional hetero-oligomeric class II chaperonin in high yield". Scientific Reports. 6 (1): 20696. Bibcode:2016NatSR...620696P. doi:10.1038/srep20696. PMC 4746591. PMID 26856373.
  13. ^ Majorek KA, Kuhn ML, Chruszcz M, Anderson WF, Minor W (October 2014). "Double trouble-Buffer selection and His-tag presence may be responsible for nonreproducibility of biomedical experiments". Protein Science. 23 (10): 1359–1368. doi:10.1002/pro.2520. PMC 4286991. PMID 25044180.
  14. ^ a b c d Riguero V, Clifford R, Dawley M, Dickson M, Gastfriend B, Thompson C, et al. (October 2020). "Immobilized metal affinity chromatography optimization for poly-histidine tagged proteins". Journal of Chromatography A. 1629: 461505. doi:10.1016/j.chroma.2020.461505. PMID 32861092. S2CID 221373404.
  15. ^ Hengen P (July 1995). "Purification of His-Tag fusion proteins from Escherichia coli". Trends in Biochemical Sciences. 20 (7): 285–286. doi:10.1016/S0968-0004(00)89045-3. PMID 7667882.
  16. ^ Chen X, Nomani A, Patel N, Hatefi A (June 2017). "Production of low-expressing recombinant cationic biopolymers with high purity". Protein Expression and Purification. 134: 11–17. doi:10.1016/j.pep.2017.03.012. PMC 5479735. PMID 28315745.
  17. ^ Andersen KR, Leksa NC, Schwartz TU (November 2013). "Optimized E. coli expression strain LOBSTR eliminates common contaminants from His-tag purification". Proteins. 81 (11): 1857–1861. doi:10.1002/prot.24364. PMC 4086167. PMID 23852738.
  18. ^ Louche A, Salcedo SP, Bigot S (2017), Journet L, Cascales E (eds.), "Protein–Protein Interactions: Pull-Down Assays", Bacterial Protein Secretion Systems: Methods and Protocols, Methods in Molecular Biology, vol. 1615, New York, NY: Springer, pp. 247–255, doi:10.1007/978-1-4939-7033-9_20, ISBN 978-1-4939-7033-9, PMID 28667618, retrieved 2023-06-08
  19. ^ Zhao C, Hellman LM, Zhan X, Bowman WS, Whiteheart SW, Fried MG (April 2010). "Hexahistidine-tag-specific optical probes for analyses of proteins and their interactions". Analytical Biochemistry. 399 (2): 237–245. doi:10.1016/j.ab.2009.12.028. PMC 2832190. PMID 20036207.
  20. ^ Ring CM, Iqbal ES, Hacker DE, Hartman MC, Cropp TA (May 2017). "Genetic incorporation of 4-fluorohistidine into peptides enables selective affinity purification". Organic & Biomolecular Chemistry. 15 (21): 4536–4539. doi:10.1039/C7OB00844A. PMC 6010304. PMID 28517015.
  21. ^ Raducanu VS, Isaioglou I, Raducanu DV, Merzaban JS, Hamdan SM (August 2020). "Simplified detection of polyhistidine-tagged proteins in gels and membranes using a UV-excitable dye and a multiple chelator head pair". The Journal of Biological Chemistry. 295 (34): 12214–12223. doi:10.1074/jbc.ra120.014132. PMC 7443479. PMID 32647010.
  22. ^ US 7176298, Tchaga GS, Jokhadze GG, "Polynucleotides encoding metal ion affinity peptides and related products", issued 13 February 2007, assigned to Takara Bio USA Inc. 
  23. ^ Chaga G, Bochkariov DE, Jokhadze GG, Hopp J, Nelson P (December 1999). "Natural poly-histidine affinity tag for purification of recombinant proteins on cobalt(II)-carboxymethylaspartate crosslinked agarose". Journal of Chromatography A. 864 (2): 247–256. doi:10.1016/S0021-9673(99)01008-0. PMID 10669292.
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=His-tag&oldid=1251442645"