CMD RAMLink

The RAMLink is one of several RAM expansion products that was made by Creative Micro Designs (CMD) for Commodore's C64/128 home computers. The RAMLink was intended as a third-party alternative, successor and optionally companion to Commodore's own 17xx-series REU RAM expansion cartridges.

RAMLink device

Inside the RAMLink

Unlike the REU, the RAMLink is externally powered and designed from the ground-up to act as a RAM disk.

Features

• Allows up to 16 MB of expansion RAM. The expansion memory can be provided by a combination of 30-pin SIMM RAM on an internal card, a Commodore 17xx-series REU (or a clone) plugged into the RAM Port, or a GeoRAM.
• Provides its own copy of JiffyDOS, allowing accelerated operation with any other Jiffy DOS-equipped disk device, as well as shorthand commands (DOS Wedge) to conveniently access any other connected storage devices.
• Full set of partitioning tools and DOS commands.
• Commodore 1541, 1571 and 1581 disk-layout emulation modes
• One partition type provides Direct-access REU-like capability
• Secondary power socket and on-board charging circuit to accept a 6-volt "sealed" lead acid backup battery.
• Battery-backed real time clock for time and date stamping of files, if the internal RAM card is present.
• Includes drivers to allow GEOS to use its memory as either a replacement for swap space, or as a regular 'disk' drive.
• Custom parallel connection for the CMD HD Series line of hard drives.
• Pass-through expansion port for standard cartridges (e.g. Action Replay, Super Snapshot)
• On-device buttons to swap device numbers with other drives, switches to disable 17xx-series REUs or change their handling.

References

• Creative Micro Designs (1990). CMD RAMLink User's Manual, third edition. (supplied with the hardware)

External links

• "CMD - RAMLink". Archived from the original on 8 March 2012. Retrieved 22 March 2012. Technical info, Games & Utilities