Wikipedia

Cahn–Ingold–Prelog priority rules

(Redirected from Re face)

In organic chemistry, the Cahn–Ingold–Prelog (CIP) sequence rules (also the CIP priority convention; named after Robert Sidney Cahn, Christopher Kelk Ingold, and Vladimir Prelog) are a standard process to completely and unequivocally name a stereoisomer of a molecule.[1][2]: 26  The purpose of the CIP system is to assign an R or S descriptor to each stereocenter and an E or Z descriptor to each double bond so that the configuration of the entire molecule can be specified uniquely by including the descriptors in its systematic name. A molecule may contain any number of stereocenters and any number of double bonds, and each usually gives rise to two possible isomers. A molecule with an integer n describing the number of stereocenters will usually have 2n stereoisomers, and 2n−1 diastereomers each having an associated pair of enantiomers.[3][4] The CIP sequence rules contribute to the precise naming of every stereoisomer of every organic molecule with all atoms of ligancy of fewer than 4 (but including ligancy of 6 as well, this term referring to the "number of neighboring atoms" bonded to a center).[2]: 26f [4]

An example of the prioritisation of structure within the CIP system. Priority is assigned according to the substitution of elements with higher atomic numbers, or other attached groups. In red is the substituent which determines the final priority (image above).[according to whom?][citation needed]

The key article setting out the CIP sequence rules was published in 1966,[5] and was followed by further refinements,[6] before it was incorporated into the rules of the International Union of Pure and Applied Chemistry (IUPAC), the official body that defines organic nomenclature, in 1974.[2]: 26ff  The rules have since been revised, most recently in 2013,[7] as part of the IUPAC book Nomenclature of Organic Chemistry. The IUPAC presentation of the rules constitute the official, formal standard for their use, and it notes that "the method has been developed to cover all compounds with ligancy up to 4... and… [extended to the case of] ligancy 6… [as well as] for all configurations and conformations of such compounds."[2]: 26ff  Nevertheless, though the IUPAC documentation presents a thorough introduction, it includes the caution that "it is essential to study the original papers, especially the 1966 paper, before using the sequence rule for other than fairly simple cases."[2]: 26f 

A recent paper argues for changes to some of the rules (sequence rules 1b and 2) to address certain molecules for which the correct descriptors were unclear.[8] However, a different problem remains: in rare cases, two different stereoisomers of the same molecule can have the same CIP descriptors, so the CIP system may not be able to unambiguously name a stereoisomer, and other systems may be preferable.[9]: 27 

Steps for naming

edit

The steps for naming molecules using the CIP system are often presented as:

  1. Identification of stereocenters and double bonds;
  2. Assignment of priorities to the groups attached to each stereocenter or double-bonded atom; and
  3. Assignment of R/S and E/Z descriptors.

Assignment of priorities

edit

R/S and E/Z descriptors are assigned by using a system for ranking priority of the groups attached to each stereocenter. This procedure, often known as the sequence rules, is the heart of the CIP system. The overview in this section omits some rules that are needed only in rare cases.

  1. Compare the atomic number (Z) of the atoms directly attached to the stereocenter; the group having the atom of higher atomic number Z receives higher priority (i.e. number 1).
  2. If there is a tie, the atoms at distance 2 from the stereocenter have to be considered: a list is made for each group of further atoms bonded to the one directly attached to the stereocenter. Each list is arranged in order of decreasing atomic number Z. Then the lists are compared atom by atom; at the earliest difference, the group containing the atom of higher atomic number Z receives higher priority.
  3. If there is still a tie, each atom in each of the two lists is replaced with a sublist of the other atoms bonded to it (at distance 3 from the stereocenter), the sublists are arranged in decreasing order of atomic number Z, and the entire structure is again compared atom by atom. This process is repeated recursively, each time with atoms one bond farther from the stereocenter, until the tie is broken.

Isotopes

edit

If two groups differ only in isotopes, then the larger atomic mass is used to set the priority.[10]

Double and triple bonds

edit
 
This example showcases the "divide and duplicate rule" for double bonds. The vinyl group (C=C) or alkene portion has a higher priority over the alkane (C−C) portion.

If an atom, A, is double-bonded to another atom, then atom A should be treated as though it is "connected to the same atom twice".[11] An atom that is double-bonded has a higher priority than an atom that is single bonded.[11] When dealing with double bonded priority groups, one is allowed to visit the same atom twice as one creates an arc.[12]

When B is replaced with a list of attached atoms, A itself, but not its "phantom", is excluded in accordance with the general principle of not doubling back along a bond that has just been followed. A triple bond is handled the same way except that A and B are each connected to two phantom atoms of the other.[2]: 28 

Geometrical isomers

edit

If two substituents on an atom are geometric isomers of each other, the Z-isomer has higher priority than the E-isomer. A stereoisomer that contains two higher priority groups on the same face of the double bond (cis) is classified as "Z." The stereoisomer with two higher priority groups on opposite sides of a carbon-carbon double bond (trans) is classified as "E."[13]

Cyclic molecules

edit

To handle a molecule containing one or more cycles, one must first expand it into a tree (called a hierarchical digraph) by traversing bonds in all possible paths starting at the stereocenter. When the traversal encounters an atom through which the current path has already passed, a phantom atom is generated in order to keep the tree finite. A single atom of the original molecule may appear in many places (some as phantoms, some not) in the tree.[14]: 572 

Assigning descriptors

edit

Stereocenters: R/S

edit
 
Two examples of stereocenters. The lowest substituent (number 4) is shown only by a wavy line, and is assumed to be behind the rest of the molecule. Both centers shown are S isomers.

A chiral sp3 hybridized isomer contains four different substituents. All four substituents are assigned prorites based on its atomic numbers. After the substituents of a stereocenter have been assigned their priorities, the molecule is oriented in space so that the group with the lowest priority is pointed away from the observer. If the substituents are numbered from 1 (highest priority) to 4 (lowest priority), then the sense of rotation of a curve passing through 1, 2 and 3 distinguishes the stereoisomers. In a configurational isomer, the lowest priority group (most times hydrogen) is positioned behind the plane or the hatched bond going away from the reader. The highest priority group will have an arc drawn connecting to the rest of the groups, finishing at the group of third priority. An arc drawn clockwise, has the rectus (R) assignment. An arc drawn counterclockwise, has the sinister (S) assignment. The names are derived from the Latin for 'right' and 'left', respectively.[15][16] When naming an organic isomer, the abbreviation for either rectus or sinister assignment is placed in front of the name in parentheses. For example, 3-methyl-1-pentene with a rectus assignment is formatted as (R)-3-methyl-1-pentene.[12]

 
An example of a (s) descriptor: (1R,2s,3S)-1,2,3-trichlorocyclopentane

A practical method of determining whether an enantiomer is R or S is by using the right-hand rule: one wraps the molecule with the fingers in the direction 1 → 2 → 3. If the thumb points in the direction of the fourth substituent, the enantiomer is R; otherwise, it is S.

It is possible in rare cases that two substituents on an atom differ only in their absolute configuration (R or S). If the relative priorities of these substituents need to be established, R takes priority over S. When this happens, the descriptor of the stereocenter is a lowercase letter (r or s) instead of the uppercase letter normally used.[17]

Double bonds: E/Z

edit
Main article: E-Z notation

For double bonded molecules, Cahn–Ingold–Prelog priority rules (CIP rules) are followed to determine the priority of substituents of the double bond. If both of the high priority groups are on the same side of the double bond (cis configuration), then the stereoisomer is assigned the configuration Z (zusammen, German word meaning "together"). If the high priority groups are on opposite sides of the double bond ( trans configuration ), then the stereoisomer is assigned the configuration E (entgegen, German word meaning "opposed")[18]

Coordination compounds

edit

In some cases where stereogenic centers are formed, the configuration must be specified. Without the presence of a non-covalent interaction, a compound is achiral. Some professionals have proposed a new rule to account for this. This rule states that "non-covalent interactions have a fictitious number between 0 and 1" when assigning priority.[19] Compounds in which this occurs are referred to as coordination compounds.

Spiro compounds

edit

Some spiro compounds, for example the SDP ligands ((R)- and (S)-7,7'-bis(diphenylphosphaneyl)-2,2',3,3'-tetrahydro-1,1'-spirobi[indene]), represent chiral, C2-symmetrical molecules where the rings lie approximately at right angles to each other and each molecule cannot be superposed on its mirror image.[12] The spiro carbon, C, is a stereogenic centre, and priority can be assigned a>a′>b>b′, in which one ring (both give the same answer) contains atoms a and b adjacent to the spiro carbon, and the other contains a′ and b′. The configuration at C may then be assigned as for any other stereocentre.

Examples

edit

The following are examples of application of the nomenclature.[20]

R/S assignments for several compounds
 
 The hypothetical molecule bromochlorofluoroiodomethane shown in its (R)-configuration would be a very simple chiral compound. The priorities are assigned based on atomic number (Z): iodine (Z = 53) > bromine (Z = 35) > chlorine (Z = 17) > fluorine (Z = 9). Allowing fluorine (lowest priority, number 4) to point away from the viewer the rotation is clockwise hence the R assignment.
 
 In the assignment of L-serine highest priority (i.e. number 1) is given to the nitrogen atom (Z = 7) in the amino group (NH2). Both the hydroxymethyl group (CH2OH) and the carboxylic acid group (COOH) have carbon atoms (Z = 6) but priority is given to the latter because the carbon atom in the COOH group is connected to a second oxygen (Z = 8) whereas in the CH2OH group carbon is connected to a hydrogen atom (Z = 1). Lowest priority (i.e. number 4) is given to the hydrogen atom and as this atom points away from the viewer, the counterclockwise decrease in priority over the three remaining substituents completes the assignment as S.
 
 The stereocenter in (S)-carvone is connected to one hydrogen atom (not shown, priority 4) and three carbon atoms. The isopropenyl group has priority 1 (carbon atoms only), and for the two remaining carbon atoms, priority is decided with the carbon atoms two bonds removed from the stereocenter, one part of the keto group (O, O, C, priority number 2) and one part of an alkene (C, C, H, priority number 3). The resulting counterclockwise rotation results in S.

Describing multiple centers

edit

If a compound has more than one chiral stereocenter, each center is denoted by either R or S. For example, ephedrine exists in (1R,2S) and (1S,2R) stereoisomers, which are distinct mirror-image forms of each other, making them enantiomers. This compound also exists as the two enantiomers written (1R,2R) and (1S,2S), which are named pseudoephedrine rather than ephedrine. All four of these isomers are named 2-methylamino-1-phenyl-1-propanol in systematic nomenclature. However, ephedrine and pseudoephedrine are diastereomers, or stereoisomers that are not enantiomers because they are not related as mirror-image copies. Pseudoephedrine and ephedrine are given different names because, as diastereomers, they have different chemical properties, even for racemic mixtures of each.

More generally, for any pair of enantiomers, all of the descriptors are opposite: (R,R) and (S,S) are enantiomers, as are (R,S) and (S,R). Diastereomers have at least one descriptor in common; for example (R,S) and (R,R) are diastereomers, as are (S,R) and (S,S). This holds true also for compounds having more than two stereocenters: if two stereoisomers have at least one descriptor in common, they are diastereomers. If all the descriptors are opposite, they are enantiomers.

A meso compound is an achiral molecule, despite having two or more stereogenic centers. A meso compound is superposable on its mirror image, therefore it reduces the number of stereoisomers predicted by the 2n rule. This occurs because the molecule obtains a plane of symmetry that causes the molecule to rotate around the central carbon–carbon bond.[12] One example is meso-tartaric acid, in which (R,S) is the same as the (S,R) form. In meso compounds the R and S stereocenters occur in symmetrically positioned pairs.[21]

Relative configuration

edit

The relative configuration of two stereoisomers may be denoted by the descriptors R and S with an asterisk (*). (R*,R*) means two centers having identical configurations, (R,R) or (S,S); (R*,S*) means two centers having opposite configurations, (R,S) or (S,R). To begin, the lowest-numbered (according to IUPAC systematic numbering) stereogenic center is given the R* descriptor.

To designate two anomers the relative stereodescriptors alpha (α) and beta (β) are used. In the α anomer the anomeric carbon atom and the reference atom do have opposite configurations (R,S) or (S,R), whereas in the β anomer they are the same (R,R) or (S,S).[22]

Faces

edit
 
Acetophenone and α-phenylethanol. The H atom has the lowest priority number 4.

Stereochemistry also plays a role assigning faces to trigonal molecules such as ketones. A nucleophile in a nucleophilic addition can approach the carbonyl group from two opposite sides or faces. When an achiral nucleophile attacks acetone, both faces are identical and there is only one reaction product. When the nucleophile attacks butanone, the faces are not identical (enantiotopic) and a racemic product results. When the nucleophile is a chiral molecule diastereoisomers are formed. When one face of a molecule is shielded by substituents or geometric constraints compared to the other face the faces are called diastereotopic. The same rules that determine the stereochemistry of a stereocenter (R or S) also apply when assigning the face of a molecular group. The faces are then called the Re-face and Si-face.[23][24] In the example displayed on the right, the compound acetophenone is viewed from the Re-face. Hydride addition as in a reduction process from this side will form the (S)-enantiomer and attack from the opposite Si-face will give the (R)-enantiomer. However, one should note that adding a chemical group to the prochiral center from the Re-face will not always lead to an (S)-stereocenter, as the priority of the chemical group has to be taken into account. That is, the absolute stereochemistry of the product is determined on its own and not by considering which face it was attacked from. In the above-mentioned example, if chloride (Z = 17) were added to the prochiral center from the Re-face, this would result in an (R)-enantiomer.

See also

edit

References

edit
  1. ^ March, Jerry; Michael B., Smith (2007). March's advanced organic chemistry : reactions, mechanisms, and structure (6. ed.). Hoboken, NJ: Wiley-Interscience. pp. 155–162. ISBN 978-0-471-72091-1.
  2. ^ a b c d e f Cross, L.C; Klyne, W. (1974). Rules for the Nomenclature of Organic Chemistry: Section E: Stereochemistry (Recommendations 1974) (PDF). ISBN 978-0-08-021019-3. Archived from the original (PDF) on 2016-04-07.
  3. ^ Clayden, Jonathan; Greeves, Nick & Warren, Stuart (2012). Organic Chemistry (2nd ed.). Oxford, UK: Oxford University Press. pp. 316f. ISBN 978-0199270293. Retrieved 2 February 2016.
  4. ^ a b The "usually" has its basis in the fact that molecules with chiral centers nevertheless may have mirror planes of symmetry, e.g. meso compounds, that make some of the stereoisomers "degenerate" (identical), so that this mathematical expression overestimates the number. See Clayden, op. cit., p. 317.
  5. ^ Cahn, R.S.; Ingold, C.K.; Prelog, V. (1966). "Specification of Molecular Chirality". Angewandte Chemie International Edition. 5 (4): 385–415. doi:10.1002/anie.196603851.
  6. ^ Prelog, V. & Helmchen, G. (1982). "Basic Principles of the CIP-System and Proposals for a Revision". Angewandte Chemie International Edition. 21 (8): 567–58. doi:10.1002/anie.198205671.
  7. ^ IUPAC Chemical Nomenclature and Structure Representation Division (2013). "P-9". In Favre, Henri A.; Powell, Warren H. (eds.). Nomenclature of Organic Chemistry: IUPAC Recommendations and Preferred Names 2013. IUPAC–RSC. ISBN 978-0-85404-182-4.
  8. ^ Hanson, Robert M.; Mayfield, John; Vainio, Mikko; Yerin, Andrey; Redkin, Dmitry Vladimirovich; Musacchio, Sophia (30 July 2018). "Algorithmic Analysis of Cahn-Ingold-Prelog Rules of Stereochemistry: Proposals for Revised Rules and a Guide for Machine Implementation". Journal of Chemical Information and Modeling. 58 (9): 1755–1765. doi:10.1021/acs.jcim.8b00324. PMID 30059222. S2CID 51876996.
  9. ^ Mayfield, John; Lowe, Daniel; Sayle, Roger (2017). Comparing CIP implementations: The need for an open CIP. Abstracts of papers of the American Chemical Society. Vol. 254. Retrieved 2020-07-22. Abstract on publisher web site[permanent dead link‍] 
  10. ^ Ashenhurst, James (2017-01-17). "Assigning Cahn-Ingold-Prelog (CIP) Priorities (2) - The Method of Dots". Master Organic Chemistry. Retrieved 2022-11-18.
  11. ^ a b "3.6 Cahn-Ingold Prelog Rules". Chemistry LibreTexts. 2014-08-05. Retrieved 2022-11-18.
  12. ^ a b c d Patrick, Graham (2004). Instant Notes Organic Chemistry (2nd ed.). Garland Science. pp. 52–61. ISBN 0203427610.
  13. ^ Okuyama, Tadashi; Maskill, Howard (2014). Organic Chemistry, A Mechanistic Approach. Oxford University Press. pp. 38–39. ISBN 9780199693276.
  14. ^ Prelog, Vladlmir; Helmchen, Guenter (August 1982). "Basic Principles of the CIP-System and Proposals for a Revision". Angewandte Chemie International Edition in English. 21 (8): 567–583. doi:10.1002/anie.198205671.
  15. ^ Klein, David R. (2013-12-31). Organic Chemistry (2nd ed.). Wiley. p. 203. ISBN 978-1118454312.
  16. ^ Cahn, R. S. (March 1964). "An introduction to the sequence rule: A system for the specification of absolute configuration". Journal of Chemical Education. 41 (3): 116. Bibcode:1964JChEd..41..116C. doi:10.1021/ed041p116.
  17. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "pseudo-asymmetric carbon atom". doi:10.1351/goldbook.P04921
  18. ^ International Union of Pure and Applied Chemistry. Commission on the Nomenclature of Organic Chemistry (1993). A guide to IUPAC nomenclature of organic compounds : recommendations 1993. Robert Panico, Warren H. Powell, Jean-Claude Richer. Oxford: Blackwell Scientific Publications. ISBN 0-632-03702-4. OCLC 27431284.
  19. ^ Elguero, José (2016-12-01). "Is it possible to extend the Cahn-Ingold-Prelog priority rules to supramolecular structures and coordination compounds using lone pairs?". Chemistry International (in German). 38 (6): 30–31. doi:10.1515/ci-2016-0633. ISSN 1365-2192. S2CID 99300397.
  20. ^ Harold Hart; Christopher M. Hadad; Leslie E. Craine; David J. Hart (1 January 2011). Organic Chemistry: A Short Course. Cengage Learning. pp. 177–. ISBN 978-1-133-17283-3.
  21. ^ Bruice, Paula Yurkanis (2007). Organic chemistry. Pearson Prentice Hall. ISBN 978-0-13-199631-1. OCLC 1046519135.
  22. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Relative Configuration". doi:10.1351/goldbook.R05260
  23. ^ Moss, G. P. (1996). "Basic terminology of stereochemistry (IUPAC Recommendations 1996)". Pure and Applied Chemistry. 68 (12): 2193–2222. doi:10.1351/pac199668122193. S2CID 98272391.
  24. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Re, Si". doi:10.1351/goldbook.R05308
Retrieved from "https://en.wikipedia.org/w/index.php?title=Cahn–Ingold–Prelog_priority_rules&oldid=1239458284#Faces"