Rishworth branch

(Redirected from Rishworth Branch)

The Rishworth branch was built in the Ryburn valley by the Lancashire and Yorkshire Railway and linked Sowerby Bridge with Rishworth and served the villages of Triangle, Ripponden, Barkisland and Rishworth.[1]

Rishworth branch
Overview
StatusDisused
OwnerLancashire and Yorkshire Railway
LocaleWest Yorkshire, England
Termini
History
Opened1 July 1878 (goods)
Closed
  • 8 July 1929 (passenger)
  • 1 September 1958 (goods)
Technical
Track gauge4 ft 8+12 in (1,435 mm) standard gauge
Route map

(Click to expand)

History

edit

A branch from Sowerby Bridge to Ripponden was authorised in 1865, with an extension to Rishworth authorised in 1871. The line opened as far as Ripponden in 1878 and to Rishworth in 1881. It was intended to extend the line to Littleborough to shorten the Calder Valley main line by 5 miles (8 km), but this never took place. The branch line was closed to passengers on 8 July 1929. The section between Rishworth and Ripponden closed for freight in 1953 and Ripponden to Sowerby Bridge closed completely on 1 September 1958.

Route

edit

The line left Sowerby Bridge a little to the east of the station, diverging south. It passed through the 593 yd (542 m) Scar Head tunnel, rising on a 1 in 107 gradient to Triangle. From Triangle to Rishworth the gradient increased to 1 in 60.

Present day

edit

A section of the line south west from Ripponden village is a permissive footpath.[2]

References

edit
  1. ^ Joy, David (1984). A Regional History of the Railways of Great Britain Volume VIII South and West Yorkshire. David St John Thomas. ISBN 0-946537-11-9.
  2. ^ "Railway Ramblers Calderdale - L&YR SOWERBY BRIDGE - RISHWORTH (3½ miles)". Retrieved 15 May 2009.

Further reading

edit