Clavering Windmills

(Redirected from South Mill, Clavering)

Clavering Windmills are a pair of Grade II listed[1][2] Tower mills in Clavering, Essex, England. They have both been converted to residential use. They are named North Mill and South Mill. A third mill existed in Clavering until the mid-nineteenth century, known as Clavering Mill.

North Mill, Clavering
North Mill, November 2006
Map
Origin
Mill nameNorth Mill
Grid referenceTL 466 328
Coordinates51°58′26″N 0°08′10″E / 51.974°N 0.136°E / 51.974; 0.136
Operator(s)Private
Year built1811
Information
PurposeCorn mill
TypeTower mill
StoreysFive storeys
No. of sailsFour sails
Type of sailsSingle Patent sails
Auxiliary powerOil engine
No. of pairs of millstonesThree pairs
South Mill, Clavering
South Mill, November 2006
Map
Origin
Mill nameSouth Mill
Grid referenceTL 465 326
Coordinates51°58′23″N 0°07′59″E / 51.973°N 0.133°E / 51.973; 0.133
Operator(s)Private
Year built1757
Information
PurposeCorn mill
TypeTower mill
StoreysFour storeys
No. of sailsFour sails
Type of sailsSpring sails
WindingFantail
No. of pairs of millstonesTwo pairs

History

edit

Clavering Mill

edit

Clavering Mill was a Post mill. It was marked on a map dated c.1625 and then in the ownership of Sir Francis Barrington. In 1702 it was conveyed to Sir Charles Barrington. The mill was marked on Warburton, Bland and Smyth’s map of 1724. It was marked on a plan of Clavering dated 1783 and also on the 1840 Tithe map of Clavering. White’s Directory of 1848 records three millers in Clavering, the last date at which the post mill can be assumed to have been standing.[3]

North Mill

edit

North Mill was built for James Pavitt in 1811, working in conjunction with the post mill until 1845. A 16 horsepower (12 kW) oil engine was installed in 1919 by Thomas Hunt, the Soham millwright. The sails were removed about this time, but the mill worked by the engine for many years.[3]

South Mill

edit

South Mill was built in 1757. The mill was idle in 1906, but then put back to work by its new owner, William Caton. It worked by wind until autumn 1919 and the sails were removed the following spring. No auxiliary power was provided, the mill working by wind alone.[3]

Description

edit

Clavering Mill

edit

No details are known of this mill, although it would have had Common sails when built. It is not known whether there was a roundhouse or not.[3]

North Mill

edit

North Mill is a five-storey tower mill with a beehive cap, winded by a fantail. It had four Single Patent sails, which rotated clockwise. The Upright Shaft is wooden, as is the clasp arm Great Spur Wheel, which drove three pairs of millstones overdrift.[3]

South mill

edit

South Mill is a four-storey tower mill with a beehive cap with a gallery. It was winded by a fantail It had four Single Spring sails. The mill drove two pairs of French Burr millstones.[3]

Millers

edit

Post

  • William Hill 1702
  • Thomas Nottage 1802
  • James Pavitt 1804 - 1845

South

  • Henry Salmon 1772 - 1804
  • Henry Moore 1840–1850
  • William Overill 1849
  • Zachariah Livings 1861
  • Robert Spencer 1871
  • William Caton 1906 - 1919

North

  • James Pavitt 1811–1845
  • James Pavitt Jr 1845 - 1850
  • Spencer 1879
  • William Caton 1906 –
  • A E Caton 1935

References for above:-[3]

edit

References

edit
  1. ^ Historic England. "Windmill at The Mills, Mill End, Clavering (1322464)". National Heritage List for England. Retrieved 22 July 2008.
  2. ^ Historic England. "Windmill approximately 180 metres north east of The Mills and shop, Mill End, Clavering (1112432)". National Heritage List for England. Retrieved 22 July 2008.
  3. ^ a b c d e f g Farries, Kenneth (1984). Essex Windmills, Millers and Millwrights - Volume Three - A Review by Parishes, A-E. Edinburgh: Charles Skilton. pp. 81–84. ISBN 0-284-98642-9.