In geometry, the truncated icosahedron is a polyhedron that can be constructed by truncating all of the regular icosahedron's vertices. Intuitively, it may be regarded as footballs (or soccer balls) that are typically patterned with white hexagons and black pentagons. It can be found in the application of geodesic dome structures such as those whose architecture Buckminster Fuller pioneered are often based on this structure. It is an example of an Archimedean solid, as well as a Goldberg polyhedron.
Truncated icosahedron | |
---|---|
![]() | |
Type | Archimedean solid Uniform polyhedron Goldberg polyhedron |
Faces | 32 |
Edges | 90 |
Vertices | 60 |
Symmetry group | Icosahedral symmetry |
Dual polyhedron | Pentakis dodecahedron |
Vertex figure | |
![]() | |
Net | |
![]() |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/67/Truncated_icosahedron.stl/220px-Truncated_icosahedron.stl.png)
Construction
editThe truncated icosahedron can be constructed from a regular icosahedron by cutting off all of its vertices, known as truncation. Each of the 12 vertices at the one-third mark of each edge creates 12 pentagonal faces and transforms the original 20 triangle faces into regular hexagons.[1] Therefore, the resulting polyhedron has 32 faces, 90 edges, and 60 vertices.[2] A Goldberg polyhedron is one whose faces are 12 pentagons and some multiple of 10 hexagons. There are three classes of Goldberg polyhedron, one of them is constructed by truncating all vertices repeatedly, and the truncated icosahedron is one of them, denoted as .[3]
Properties
editThe surface area and the volume of the truncated icosahedron of edge length are:[2] The sphericity of a polyhedron describes how closely a polyhedron resembles a sphere. It can be defined as the ratio of the surface area of a sphere with the same volume to the polyhedron's surface area, from which the value is between 0 and 1. In the case of a truncated icosahedron, it is:[2]
The dihedral angle of a truncated icosahedron between adjacent hexagonal faces is approximately 138.18°, and that between pentagon-to-hexagon is approximately 142.6°.[4]
The truncated icosahedron is an Archimedean solid, meaning it is a highly symmetric and semi-regular polyhedron, and two or more different regular polygonal faces meet in a vertex.[5] It has the same symmetry as the regular icosahedron, the icosahedral symmetry, and it also has the property of vertex-transitivity.[6][7] The polygonal faces that meet for every vertex are one pentagon and two hexagons, and the vertex figure of a truncated icosahedron is . The truncated icosahedron's dual is pentakis dodecahedron, a Catalan solid,[8] shares the same symmetry as the truncated icosahedron.[9]
Truncated icosahedral graph
editAccording to Steinitz's theorem, the skeleton of a truncated icosahedron, like that of any convex polyhedron, can be represented as a polyhedral graph, meaning a planar graph (one that can be drawn without crossing edges) and 3-vertex-connected graph (remaining connected whenever two of its vertices are removed).[10] The graph is known as truncated icosahedral graph, and it has 60 vertices and 90 edges. It is an Archimedean graph because it resembles one of the Archimedean solids. It is a cubic graph, meaning that each vertex is incident to exactly three edges.[11][12][13]
Appearance
editThe balls used in association football and team handball are perhaps the best-known example of a spherical polyhedron analog to the truncated icosahedron, found in everyday life.[14] The ball comprises the same pattern of regular pentagons and regular hexagons, each of which is painted in black and white respectively; still, its shape is more spherical. It was designed by Adidas Telstar during World Cup in 1970.[15] However, it was superseded in 2006.[16]
Geodesic domes are typically based on triangular facetings of this geometry with example structures found across the world, popularized by Buckminster Fuller. An example can be found in the model of a buckminsterfullerene, a truncated icosahedron-shaped geodesic dome allotrope of elemental carbon discovered in 1985.[17] In other engineering and science applications, its shape was also the configuration of the lenses used for focusing the explosive shock waves of the detonators in both the gadget and Fat Man atomic bombs.[18] Its structure can also be found in the protein of clathrin.[13]
The truncated icosahedron was known to Archimedes, who classified the 13 Archimedean solids in a lost work. All that is now known of his work on these shapes comes from Pappus of Alexandria, who merely lists the numbers of faces for each: 12 pentagons and 20 hexagons, in the case of the truncated icosahedron. The first known image and complete description of a truncated icosahedron are from a rediscovery by Piero della Francesca, in his 15th-century book De quinque corporibus regularibus, which included five of the Archimedean solids (the five truncations of the regular polyhedra).[19] The same shape was depicted by Leonardo da Vinci, in his illustrations for Luca Pacioli's plagiarism of della Francesca's book in 1509. Although Albrecht Dürer omitted this shape from the other Archimedean solids listed in his 1525 book on polyhedra, Underweysung der Messung, a description of it was found in his posthumous papers, published in 1538. Johannes Kepler later rediscovered the complete list of the 13 Archimedean solids, including the truncated icosahedron, and included them in his 1609 book, Harmonices Mundi.[20]
See also
editReferences
edit- ^ Chancey, C. C.; O'Brien, M. C. M. (1997). The Jahn-Teller Effect in C60 and Other Icosahedral Complexes. Princeton University Press. p. 13. ISBN 978-0-691-22534-0.
- ^ a b c Berman, Martin (1971). "Regular-faced convex polyhedra". Journal of the Franklin Institute. 291 (5): 329–352. doi:10.1016/0016-0032(71)90071-8. MR 0290245.
- ^ Hart, George (2012). "Goldberg Polyhedra". In Senechal, Marjorie (ed.). Shaping Space (2nd ed.). Springer. pp. 125–138. doi:10.1007/978-0-387-92714-5_9. ISBN 978-0-387-92713-8.
- ^ Johnson, Norman W. (1966). "Convex polyhedra with regular faces". Canadian Journal of Mathematics. 18: 169–200. doi:10.4153/cjm-1966-021-8. MR 0185507. S2CID 122006114. Zbl 0132.14603.
- ^ Diudea, M. V. (2018). Multi-shell Polyhedral Clusters. Springer. p. 39. doi:10.1007/978-3-319-64123-2. ISBN 978-3-319-64123-2.
- ^ Koca, M.; Koca, N. O. (2013). "Coxeter groups, quaternions, symmetries of polyhedra and 4D polytopes". Mathematical Physics: Proceedings of the 13th Regional Conference, Antalya, Turkey, 27–31 October 2010. World Scientific. p. 48.
- ^ Cromwell, Peter R. (1997). Polyhedra. Cambridge University Press. p. 386. ISBN 978-0-521-55432-9.
- ^ Williams, Robert (1979). The Geometrical Foundation of Natural Structure: A Source Book of Design. Dover Publications, Inc. p. 90. ISBN 978-0-486-23729-9.
- ^ Holden, Alan (1991). Shapes, Space, and Symmetry. Dover Books on Mathematics. Courier Corporation. p. 52. ISBN 9780486268514.
- ^ Negami, S. (2016). "Faithful Embeddings of Planar Graphs on Orientable Closed Surfaces". In Širáň, Jozef; Jajcay, Robert (eds.). Symmetries in Graphs, Maps, and Polytopes: 5th SIGMAP Workshop, West Malvern, UK, July 2014. Springer. p. 250. doi:10.1007/978-3-319-30451-9. ISBN 978-3-319-30451-9.
- ^ Read, R. C.; Wilson, R. J. (1998). An Atlas of Graphs. Oxford University Press. p. 268.
- ^ Godsil, C.; Royle, G. (2001). Algebraic Graph Theory. New York: Springer-Verlag. p. 211.
- ^ a b Kostant, B. (1995). "The Graph of the Truncated Icosahedron and the Last Letter of Galois" (PDF). Notices American Mathematical Society. 42 (9): 959–968.
- ^ Kotschick, Dieter (July–August 2006). "The Topology and Combinatorics of Soccer Balls". American Scientist. 94 (4): 350. doi:10.1511/2006.60.350.
- ^ Harland, Andy; Hanson, Henry (2016). "Soccer Ball Dynamics". In Strudwick, Tony (ed.). Soccer Science. Human Kinetics. p. 205. ISBN 978-1-4504-9679-7.
- ^ Posamentier, Alfred S.; Maresch, Guenter; Thaller, Bernd; Spreitzer, Christian; Geretschlager, Robert; Stuhlpfarrer, David; Dorner, Christian (2022). Geometry In Our Three-dimensional World. World Scientific. p. 182. ISBN 9789811237126.
- ^ Katz, E. A. (2006). "Fullerene Thin Films as Photovoltaic Material". In Sōga, Tetsuo (ed.). Nanostructured materials for solar energy conversion. Elsevier. p. 361. ISBN 978-0-444-52844-5.
- ^ Rhodes, Richard (1996). Dark Sun: The Making of the Hydrogen Bomb. Touchstone Books. p. 195. ISBN 0-684-82414-0.
- ^ Katz, Eugene A. (2011). "Bridges between mathematics, natural sciences, architecture and art: case of fullerenes". Art, Science, and Technology: Interaction Between Three Cultures, Proceedings of the First International Conference. pp. 60–71.
- ^ Field, J. V. (1997). "Rediscovering the Archimedean polyhedra: Piero della Francesca, Luca Pacioli, Leonardo da Vinci, Albrecht Dürer, Daniele Barbaro, and Johannes Kepler". Archive for History of Exact Sciences. 50 (3–4): 241–289. doi:10.1007/BF00374595. JSTOR 41134110. MR 1457069. S2CID 118516740.
External links
edit- Weisstein, Eric W., "Truncated icosahedron" ("Archimedean solid") at MathWorld.
- Klitzing, Richard. "3D convex uniform polyhedra x3x5o - ti".
- Editable printable net of a truncated icosahedron with interactive 3D view
- The Uniform Polyhedra
- "Virtual Reality Polyhedra"—The Encyclopedia of Polyhedra
- 3D paper data visualization World Cup ball