Talk:Studebaker US6 2½-ton 6×6 truck

(Redirected from Talk:Studebaker US6)
Latest comment: 7 years ago by Sammy D III in topic Name 21 Nov 2016

Sources?

edit

It's unclear which sources have been used to create this article, which needs still some improvement. Can anyone please help clarify this? Thanks & regards, DPdH (talk) 14:21, 20 February 2014 (UTC)Reply

Was the ZiS 151 a US6?

edit

It is sometimes said in the US that the Soviets built the Studebaker US6 as the ZiS/ZiL 151, a direct copy, without having a license.

The US6 was not all Studebaker parts. The cab, which the Soviets copied very closely, is the one we see (the first ZIS trucks had wood cabs). A ladder frame with 3 beam axles on leaf springs is pretty basic.

The US6 had a Hercules engine of 320 c.i.d., the ZiS’s 6.55 liter comes out at about 400 c.i.d., not very close. It also has metric dimensions. They were both valve in block, hardly very advanced. The Soviets also had Chevrolet/GMC overhead valve engines, a more advanced design, which they did not use.

Much of the US6 is vendor parts, Spicer, Bendix, Timken, etc., some also used by Chevrolet and GMC. I do not know how closely they were copied. The US6 had 20” wheels, probably with vacuum/hydraulic brakes (GMCs did), the ZiS had 18” with air brakes. Some ZiS dimensions are larger than the US6.

I do not see that the ZiS 151 was a direct copy of the US6, so it would not have been a stolen Studebaker design built without a license. It appears to be a very close, but not exact, copy, possibly of US trucks in general.

(this is a cut and paste from Talk:Automotive industry in the Soviet Union) Sammy D III (talk) 19:49, 29 September 2014 (UTC)Reply

Different trucks

edit

I have been playing with some similar trucks, the Chevy G506, GMC CCKW & DUKW, Stude US6, ZiS-151 (USSR), and Jiefang CA-30 (China). Sammy D III (talk) 04:48, 9 November 2014 (UTC)Reply

Inches to feet

edit

I have been told that feet are easier than inches for many people. Sammy D III (talk) 19:07, 21 September 2015 (UTC)Reply

Facts from Russian Wikipedia

edit

Studebaker US6 (ˈstʲyːdəbɛjkɐ, в СССР и затем в России устоялось произношение «Студебекер» или «Студебеккер», иногда просто «Студер»)
Translation: Studebaker US6 (ˈstʲyːdəbɛjkɐ, in USSR and later in Russia become settled the pronunciation "Studebeker" or "Studebekker", sometimes simply "Studer")

"Первые автомобили Studebaker прибыли в СССР осенью 1941 года. Технический комитет Главного автомобильного управления (ГАУ) Красной армии организовал испытание одиннадцати «Студебеккеров» (как их стали называть в СССР), длившееся с 18 июля 1942 года по 15 мая 1943 года, по результатам которых были выпущены брошюры по эксплуатации и наставление по увеличению грузоподъёмности. Согласно этим документам, несмотря на то, что официально «Студебеккер» имел грузоподъёмность в 2,5 тонн, была рекомендована грузоподъёмность 4 тонны[2]. В 1945 году норму загрузки снизили до 3,5 т, хотя по хорошим грунтовым дорогам автомобиль успешно мог перевозить грузы до 5 т. Автомобиль также имел высокое расположение частей, чувствительных к воздействию воды. Вследствие этого грузовик стал основным средством перевозки реактивных установок «Катюша» БМ-8-48, БМ-13Н, БМ-13НС и БМ-31-12 — самых мощных установок того времени. После окончания ВОВ часть машин была отправлена обратно в США в соответствии с договором о ленд-лизе. Оставшиеся машины эксплуатировались ещё какое-то время в Советской Армии, а также участвовали в восстановлении народного хозяйства СССР.

Недостатком автомобиля (по сравнению с техникой СССР того времени) являлся тот факт, что Студебеккер US6 требовал более качественные смазку и горючее. Из-за постоянной перегрузки ломались диски сцепления, чулки задних мостов. Но это не помешало использовать отдельные Студебеккеры US6 в СССР вплоть до середины шестидесятых годов и даже до конца 1980-х,[3] тем более, что остальные ленд-лизовские грузовики в подавляющем большинстве имели ещё большую степень сжатия и потребляли ещё более высокооктановый бензин."

Translation: First automobiles Studebaker arrived in USSR in the autumn of 1941. The Technical Commitee of Main Agency for Automobiles (MAA) of the Red Armee did organize a test of eleven "Studebekkers" (as they become/were called in the USSR), which took place from July 18th 1942 til Mai 15th 1943, on the results of which, a brochure for explatation and precept for enlargening the carrying/payload was released. According to these documents, although the official "Studebekker" had a payload of 2,5 tons, it was recommanded a payload of 4 tons[2]. In 1945, the norm of carrying was lowered down to 3.5 tons, although on well phreatic/grounded ways, this automobile could successfully carry loadings up to 5 tons. This automobile also had an upper emplacement/disposition /location of the parts, sensitive to the effects of water. In consequence of it, this lorry/truck became the main mean of transportation [transport] for rocket-launcher "Katusha" BM-8-48, BM-13N, BM-13NS and BM-31-12 - the most powerful launcher of these time. After the end of the WW2, a part of the cars was send back to the USA according to the contract of Lend-Lease. The remained automobiles were exploited a while in the Soviet Army, and also took part in the restoring of the national economy of the USSR.

The disadvantages of this automobile (comparing to the technique of the USSR during this time) was those fact, that Studebekker US6 demanded more qualitative lubricant and fuel. Due to the permanent overloading, the coupling discs and the stocking of the back crossovers did crash. But it didn't hinder to use particular Studebekkers US6 in the USSR til the middle of the sixtees and even till the end of the 1980s,[3] all the more, the rest of [the other] lend-lease trucks in the overwhelming majority had an even higher compression ratio and used an even more high-octane gas/benzin.

This is good stuff. It should be used. There are also articles about ZiS-151 and ZIL-157. Sammy D III (talk) 17:57, 22 February 2016 (UTC)Reply

Name 21 Nov 2016

edit

I am thinking of changing the name to "Studebaker US6 2+12-ton 6x6 truck. Sammy D III (talk) 14:48, 21 November 2016 (UTC)Reply

Common name seems to be US6. DMorpheus2 (talk) 14:10, 7 December 2016 (UTC)Reply
I have been moving other pages to a standard format. I believe "Studebaker" may attract viewers, the view count is higher than you would think. "US6" is still in the title. I am going to move it, if you disagree please let me know. Thank you. Sammy D III (talk) 20:14, 30 March 2017 (UTC)Reply

29 Nov 2016

edit

In US English the name is "tank" truck. TM 9-2800 (1947) page 280. The Army always says "tank". US commercial manufactures' sites Polar", Amthor, and Seneca (first three on Google) use "tank" as does the National Tank Truck Carriers", a trade organization. "Tanker" is slang here.

I tried to make the captions simple, type of truck break location (year). Two lines that match. I thought (1943) implies "some time in" that year, and the extra words make the captions not match. Also "and fully restored", "in" Berlin "May" (no other year has a month). Without it the three action pictures captions match. Both the Katyushas look to long to me, too. I tried to show the vehicle clean, then in service. I thought that both Berlin and Stalingrad were major Soviet victories that showed what the Soviets could do with the Studebakers, on the Persian Corridor the US was bringing them stuff.

These are my opinions, I'm not going to argue or change the captions back, you do whatever. I do old trucks, if you have any questions please ask. Thank you. Sammy D III (talk) 16:40, 29 November 2016 (UTC)Reply

Sigh. This article is about a truck designed and built in the United States. All documents and references are in US English. ENGVAR says the whole article should be in US English. Looks like we have UK English as a second language or something, so I'm just going to follow you two and change spellings back. Have a nice day/night. Sammy D III (talk) 15:05, 10 December 2016 (UTC)Reply

References

edit

Some similar articles have this format. Anything can go into "References" but will not have a footnote. Any inline cites (<ref> xxx </ref>) will come out in "Notes". To make those short ones use " {{sfnp | author or title | 1999 | p=}} " , when the info matches on two or more they will combine below. Sammy D III (talk) 18:05, 18 December 2016 (UTC)Reply