Wikidata-enabled

edit

Simply add {{Infobox mountain}} to the top of an article, and the data will be automatically included from Wikidata. If necessary, these values can be overridden by passing local values to the relevant parameters in the article:

{{Infobox mountain
| name = [local value]
}}

To add data to Wikidata, please see the Parameters section below.

Standard usage

edit
{{{name}}}
{{{other_name}}}
[[File:{{{photo}}}|{{{photo_size}}}|alt={{{photo_alt}}}|upright={{{photo_upright}}}]]
{{{photo_caption}}}
Highest point
Peak{{{highest}}}, {{{highest_location}}}
Elevation{{{elevation}}}{{{elevation_ref}}}
{{{elevation_system}}}
Prominence{{{prominence}}}{{{prominence_ref}}}
Parent peak{{{parent_peak}}}
Isolation{{{isolation}}}
to {{{isolation_parent}}}{{{isolation_ref}}}
Listing{{{listing}}}
Coordinates{{{coordinates}}}{{{coordinates_ref}}}
Dimensions
Length{{{length}}} {{{length_orientation}}}{{{length_ref}}}
Width{{{width}}} {{{width_orientation}}}{{{width_ref}}}
Area{{{area}}}{{{area_ref}}}
Volume{{{volume}}}{{{volume_ref}}}
Naming
Etymology{{{etymology}}}
Nickname{{{nickname}}}
Native name{{{native_name}}} Error {{native name checker}}: parameter value is malformed (help)
English translation{{{translation}}}
Pronunciation{{{pronunciation}}}
Defining authority{{{authority}}}
Geography
Location{{{location}}}
{{{country_type}}}{{{country}}}
{{{state_type}}}{{{state}}}
{{{region_type}}}{{{region}}}
{{{district_type}}}{{{district}}}
{{{part_type}}}{{{part}}}
{{{settlement_type}}}{{{settlement}}}
Range coordinates{{{range_coordinates}}}{{{range_coordinates_ref}}}
Parent range{{{range}}}
Borders on{{{borders_on}}}
OS grid{{{grid_ref_UK}}}{{{grid_ref_UK_ref}}}
OSI/OSNI grid{{{grid_ref_Ireland}}}{{{grid_ref_Ireland_ref}}}
Topo map{{{topo_maker}}} {{{topo_map}}}
Biome{{{biome}}}
Geology
Formed by{{{formed_by}}}
Orogeny{{{orogeny}}}
Age of rock{{{age}}}
Mountain type{{{type}}}
Type of rock{{{geology}}}
Volcanic region{{{volcanic_region}}}
Last eruption{{{last_eruption}}}
Climbing
First ascent{{{first_ascent}}}
Easiest route{{{easiest_route}}}
Normal route{{{normal_route}}}
Access{{{access}}}
{{{embedded}}}
{{{module}}}
{{Infobox mountain
| name                  = 
| other_name            = 
| photo                 = 
| photo_size            = 
| photo_upright         =
| photo_alt             = 
| photo_caption         = 
<!-- MAP CODE TBA -->
| map                   = 
| mapframe = yes<!-- see below for more mapframe parameters -->
<!----------------------- HIGHEST POINT -->
| highest               = 
| highest_location      = 
| elevation             = 
| elevation_m           = 
| elevation_ft          = 
| elevation_ref         = 
| elevation_system      = 
| prominence            = 
| prominence_m          = 
| prominence_ft         = 
| prominence_ref        = 
| parent_peak           = 
| isolation             = 
| isolation_km          = 
| isolation_mi          = 
| isolation_parent      = 
| isolation_ref         = 
| listing               = 
| coordinates           = 
| coordinates_ref       = 
<!----------------------- DIMENSIONS -->
| length                = 
| length_km             = 
| length_mi             = 
| length_orientation    = 
| length_ref            = 
| width                 = 
| width_km              = 
| width_mi              = 
| width_orientation     = 
| width_ref             = 
| area                  = 
| area_km2              = 
| area_mi2              = 
| area_ref              = 
| volume                = 
| volume_km3            = 
| volume_mi3            = 
| volume_ref            = 
<!----------------------- NAMING -->
| etymology             = 
| nickname              = 
| native_name           = <!-- {{native name}} or {{native name list}} -->
| native_name_lang      = <!-- not used by |native_name= -->
| translation           = 
| pronunciation         = 
| authority             = 
<!----------------------- GEOGRAPHY -->
| location              = <!-- While location is not deprecated, use of country,state,region,district is preferred -->
| country_type          = <!-- For Antarctica, set to Continent -->
| country               = <!-- If multiple, use {{enum}} or {{hlist}}. country1 to country18 is deprecated. -->
| state_type            = 
| state                 = <!-- If multiple, use {{enum}} or {{hlist}}. state1 to state18 is deprecated. -->
| region_type           = 
| region                = <!-- If multiple, use {{enum}} or {{hlist}}. region1 to region23 is deprecated. -->
| district_type         = 
| district              = <!-- If multiple, use {{enum}} or {{hlist}}. district1 to district18 is deprecated. -->
| part_type             = 
| part                  = <!-- If multiple, use {{enum}} or {{hlist}}. part1 to part19 is deprecated. -->
| settlement_type       = Use settlement_type= instead of city_type= (deprecated).
| settlement            = <!-- If multiple, use {{enum}} or {{hlist}}. settlement1 to settlement18 is deprecated. Use settlement= instead of city= (deprecated). -->
| range_coordinates     = 
| range_coordinates_ref = 
| range                 = 
| borders_on            = 
| grid_ref_UK           = 
| grid_ref_UK_ref       = 
| grid_ref_Ireland      = 
| grid_ref_Ireland_ref  = 
| topo_maker            = 
| topo_map              = 
| biome                 = 
<!----------------------- GEOLOGY -->
| formed_by             = 
| orogeny               = 
| age                   = 
| type                  = 
| geology               = 
| volcanic_region       = 
| volcanic_arc          = 
| volcanic_belt         = 
| volcanic_field        = 
| volcanic_arc/belt     = 
| last_eruption         = 
<!----------------------- CLIMBING -->
| first_ascent          = 
| easiest_route         = 
| normal_route          = 
| access                = 
<!----------------------- ATTACHED -->
| embedded              =
| module                =
}}

Parameters

edit

Lead section

edit
Parameter Default value Description
name Wikidata label in the local language Name of the mountain, peak or hill.
other_name   Other name for the mountain. See native_name if the name is in a different language.
photo Image on Wikidata Photograph of the mountain. Preferably a distance shot to show most/all of the mountain rather than a view from the summit.
photo_size 280px The default image width in pixels.
photo_upright
photo_alt photo_caption Alt text for the photo.
photo_caption media legend (P2096) stated on image Description of the photograph.

Maps

edit

The maps appear in the lead section, at the top, if there is no photo present. However, if there is a photo, they all move to the Geography section automatically.

Parameter Default value Description
map The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinates template ({{coord}}) positions a pushpin marker and label on the map automatically. Example see: Mount Everest. For a static image, use |map_image=
map_image The file name of a static map image to be displayed. To use a location map, use |map=.
map_alt Alt text for the map, primarily for visually impaired readers. See Alt text for maps.
map_caption Fill out if a map caption is desired. If not specified, location will be used.
map_image_caption Fill out if a caption for the map image is desired. If not specified, map_caption will be used.
map_relief If a location map template is specified, this template will attempt to display a relief map if one is available. To force the default map image to display use |map_relief=0.
map_size Must be entered as only a number—no need for px. The default value and maximum is 272.
map_width
relief
label
label_position

Mapframe maps

edit
  • Basic parameters:
    • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: Shown (onByDefault) unless one of these parameters has a value: |map=, |map_image=, |image_map=, |map_relief=, |relief=.
    • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
    • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
    • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
    • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
    • mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: yes
  • Customise which features are displayed:
    • mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
    • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
    • mapframe-line – Turn off display of line feature by setting to none. Default: not specified
    • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country (P17), P131 for located in the administrative territorial entity (P131)). Default: not specified
    • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: zooms
      • auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
      • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
      • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
  • Other optional parameters:
    • mapframe-frame-width or mapframe-width – Frame width. Default: 250
    • mapframe-frame-height or mapframe-height – Frame height. Default: 200
    • mapframe-shape-fill – Color used to fill shape features. Default: #606060
    • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
    • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
    • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: mountain
      • Can also be set to blank to override any default marker symbol
    • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
    • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
    • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
    • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
    • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
    • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
    • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
    • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Highest point

edit
Parameter Default value Description
highest elevation above sea level (P2044) with qualifier name (P2561) Name of the highest summit of a single mountain or peak.
highest_location elevation above sea level (P2044) with qualifier location (P276) Location of highest summit.
elevation elevation above sea level (P2044) Summit elevation, without auto-conversion. You may wish to use {{Convert|xxx|m|ft|abbr=on}}
elevation_m Summit elevation in metres, with auto-conversion.
elevation_ft Summit elevation in feet, with auto-conversion.
elevation_ref N/A Optional parameter to add a suffix to the elevation parameters (such as a reference).
elevation_system elevation above sea level (P2044) with qualifier determination method or standard (P459) The elevation reference system that defines the elevation, e.g., NAVD88 or DE-NHN
prominence topographic prominence (P2660) Topographic prominence, without auto-conversion. You may wish to use {{Convert|xxx|m|ft|abbr=on}}
prominence_m Topographic prominence in metres, with auto-conversion.
prominence_ft Topographic prominence in metres, with auto-conversion.
prominence_ref N/A Optional parameter to add a suffix to the prominence parameters (such as a reference).
parent_peak parent peak (P3137)  
isolation topographic isolation (P2659) Topographic isolation, without auto-conversion. You may wish to use {{Convert|xxx|km|mi|abbr=on}}
isolation_km Topographic isolation in kilometres, with auto-conversion.
isolation_mi Topographic isolation in miles, with auto-conversion.
isolation_parent topographic isolation (P2659) with qualifier relative to (P2210) Name of the landform the summit is isolated from.
isolation_ref N/A Optional parameter to add a suffix to the isolation parameters (such as a reference).
listing part of (P361) Name of a relevant list of mountains that the peak belongs to. See List of mountain lists for examples.
coordinates coordinate location (P625) Coordinates of the highest point or peak.
coordinates_ref N/A Optional parameter to add a suffix to the coordinates parameter (such as a reference).

Dimensions

edit
Parameter Default value Description
length length (P2043) Length of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km|mi|abbr=on}}
length_km Length in kilometres, with auto-conversion.
length_mi Length in miles, with auto-conversion.
length_orientation length (P2043) with qualifier orientation (P7469) as:
latitude (Q34027) (for EW) or longitude (Q36477) (for NS)
Length orientation.
length_ref N/A Optional parameter to add a suffix to the length parameters (such as a reference).
width width (P2049) Width of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km|mi|abbr=on}}
width_km Length in kilometres, with auto-conversion.
width_mi Length in miles, with auto-conversion.
width_orientation width (P2049) with qualifier orientation (P7469) as:
latitude (Q34027) (for EW) or longitude (Q36477) (for NS)
Width orientation.
width_ref N/A Optional parameter to add a suffix to the width parameters (such as a reference).
area area (P2046) Footprint of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km2|mi2|abbr=on}}
area_km2 Footprint of the mountain or peak in square kilometres, with auto-conversion.
area_mi2 Footprint of the mountain or peak in square miles, with auto-conversion.
area_ref N/A Optional parameter to add a suffix to the area parameters (such as a reference).
volume volume as quantity (P2234) Volume of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km3|mi3|abbr=on}}
volume_km3 Volume of the mountain or peak in cubic kilometres, with auto-conversion.
volume_mi3 Volume of the mountain or peak in cubic miles, with auto-conversion.
volume_ref N/A Optional parameter to add a suffix to the volume parameters (such as a reference).

Naming

edit
Parameter Default value Description
etymology named after (P138) Origin of name
nickname nickname (P1449)  
native_name name in native language (P1559) Name in local language – use {{native name}} or, for multiple names, use {{native name list}}
native_name_lang name in native language (P1559) ISO 639-2 code of native_name; not used by native_name.
translation name in native language (P1559) with qualifier literal translation (P2441) Translation of name to English (if name is not an English name)
pronunciation IPA transcription (P898) Use an appropriate IPA-xx template, replacing 'xx' with the ISO code for the language. (See {{IPAc-en}} for English.)
authority    

Geography

edit
Parameter Default value Description
location location (P276) Free-form field to describe the location.
country country (P17) Country(ies) of the peak or mountain.
country_type   Optional parameter to override the default "Country" label.
subdivision1/state located in the administrative territorial entity (P131) 1st level subdivision (i.e. states) of the peak or mountain.
subdivision1_type/state_type   Optional parameter to override the default "State" label.
subdivision2/region   2nd level subdivision (i.e. regions) of the peak or mountain.
subdivision2_type/region_type   Optional parameter to override the default "Region" label.
subdivision3/district   3rd level subdivision (i.e. districts) of the peak or mountain.
subdivision3_type/district_type   Optional parameter to override the default "District" label.
subdivision4/part   4th level subdivision (i.e. subdivisions) of the peak or mountain.
subdivision4_type/part_type   Optional parameter to override the default "Subdivisions" label.
settlement   Settlement(s) on/around the peak or mountain.
settlement_type   Optional parameter to override the default "Settlement" label.
range_coordinates    
range_coordinates_ref N/A Optional parameter to add a suffix to the range_coordinates parameter (such as a reference).
range mountain range (P4552) The mountain range (specific subgroup) that the mountain/massif/range. I.e. Bernese Alps, not Alps. Alias is "parent".
borders_on/border has boundary (P4777) Geographical entities that form the border of the mountain or range
grid_ref_UK OS grid reference (P613) If the mountain is in Great Britain, the British grid reference. Use grid_ref_UK_ref to add a suffix reference.
grid_ref_Ireland Irish Grid Reference (P4091) If the mountain is in Ireland (whether Northern Ireland or the Republic), the Irish grid reference. Use grid_ref_Ireland_ref to add a suffix reference.
topo_maker   The publisher of the topographic map that contains the range
topo   The name of the topographic map that contains the range
topo_map    
biome   Biome(s) for range

Geology

edit
Parameter Default value Description
formed_by    
orogeny    
age   Age of the rock. Geologic time scales may be useful here. Use period, period1 through period5 for multiple values.
type    
rock   Type of the rock mountain is made from. Use geology, geology1 through geology5, for multiple types.
volcanic_region   If the mountain is a volcano, the arc, belt or field in which it is situated.
last_eruption   The date of the last eruption if the mountain is of volcanic origin.

Climbing

edit
Parameter Default value Description
first_ascent   Date of the first recorded ascent.
easiest_route   The easiest route to the summit. Some possibilities include Hike, Scramble or any of the YDS grades.
normal_route    
access    

Advanced uses

edit
Parameter Default value Description
qid    
suppressfields    
fetchwikidata    
onlysourced    
child    
embedded    
module    

Tracking categories

edit

TemplateData

edit
Click the [show] link to the right to display the TemplateData
This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox mountain in articles based on its TemplateData.

TemplateData for Infobox mountain

This template is used to create an infobox for an article about a mountain.

Template parameters

This template prefers block formatting of parameters.

ParameterDescriptionTypeStatus
Namename

Name of the mountain, peak or hill. If more than one mountain by the name exists, the article is likely disambiguated but this name in the infobox should be the undisambiguated name. For example, Mount Columbia (for Mount Columbia (Canada) or Mount Columbia (Colorado).

Stringrequired
Other nameother_name

An alternate English name for the mountain, e.g., "Mount McKinley" for Denali. Quotes can be used as normal to italicize or bold the text if desired.

Stringoptional
Etymologyetymology

The etymology of the name

Stringoptional
Native namenative_name

The name of the mountain in the local language, if not English.

Stringoptional
ISO 639 language codenative_name_lang

The ISO 639 code for the language of the mountain name (if not English). e.g., "fr" for French

Stringoptional
Languagelanguage

Language of mountain name.

Stringoptional
Translationtranslation

Translation of the mountain's name into English

Stringoptional
Pronunciationpronunciation

Use an appropriate IPA-xx template, replacing 'xx' with the ISO code for the language. (See {{IPAc-en}} for English.)

Stringoptional
Photophoto

Photograph of the mountain. Preferably a distance shot to show most/all of the mountain rather than a view from the summit. Do not include the "File:" prefix. If uploading a new image, please put them on Commons so they can be easily used by the other language Wikipedias. If the only image available is less than 280px wide, you can use the photo_size parameter to indicate its size.

Stringoptional
Photo altphoto_alt

Alt text for the photo, primarily for visually impaired readers. See Wikipedia:Alternative text for images.

Stringoptional
Photo captionphoto_caption

Description of the photograph which is displayed below. Include the month and year if known.

Stringoptional
Mapmap

The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields position a pushpin coordinate marker and label on the map automatically. Example see: Mount Everest. For a static image, use map_image

Stringoptional
Mapmap_image

The file name of a static map image to be displayed. For a [[Template:location map|location map]], use map

Stringoptional
Map altmap_alt

Alt text for the map, primarily for visually impaired readers. See [[Wikipedia:Alternative text for images#Maps]].

Stringoptional
Map captionmap_caption

Fill out if a map caption is desired. If not specified, location will be used.

Stringoptional
Locationlocation

Province or state first, followed by country. For USA, the county is optional but if given, be provided before the state. If a pushpin map is being used, the location will be used for the map's caption unless the map_caption parameter is set.

Stringoptional
Map reliefmap_relief

If a location map template is specified, this template will attempt to display a relief map if one is available. To force the default map image to display set to 0.

Stringoptional
Labellabel

Label to be used for the mountain's location on the map. If not specified, the value of the name parameter is used.

Stringoptional
Label positionlabel_position

The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}.

Default
right
Lineoptional
Elevationelevation

Maximum height of the mountain. If the mountain has multiple high points, use the highest. Metres should be used first for all mountains outside of the United States and feet for those within the U.S. For conversions, use elevation_m for metres to feet or elevation_ft for feet to metres. This field is required.

Stringoptional
Elevation (meters)elevation_m

Maximum height of the mountain, metres.

Stringoptional
Elevation (feet)elevation_ft

Maximum height of the mountain, feet.

Stringoptional
Elevation refelevation_ref

Reference for the elevation using the standard <ref> </ref> tags. If elevation_m/elevation_ft was used, the reference must be supplied using this parameter.

Stringoptional
Prominenceprominence

The clean topographic prominence of the summit. For conversions, use prominence_m for metres to feet or prominence_ft for feet to metres.

Stringoptional
Prominence (meters)prominence_m

The clean topographic prominence of the summit, metres.

Stringoptional
Prominence (feet)prominence_ft

The clean topographic prominence of the summit, feet.

Stringoptional
Prominence refprominence_ref

Reference for the prominence using the standard <ref> </ref> tags.

Stringoptional
Parent peakparent_peak

In computation of prominence, peaks form a hierarchy: this is the parent of the peak in the hierarchy. For more information, see Line parent.

Stringoptional
Listinglisting

Name of a relevant list of mountains that the peak belongs to. See List of mountain lists for examples.

Stringoptional
Rangerange

Mountain range if applicable. The specific range subgroup should be provided instead of any major mountain system unless there is no applicable subgroup. For example, use Teton Range and not Rocky Mountains or Bernese Alps not Alps.

Stringoptional
Coordinatescoordinates coords

The latitude and longitude of the summit using the {{coord}} template with display=inline,title. If the article uses a geolinks template in the external links section, do not use the display parameter.

Stringoptional
Topotopo

Topographic map

Stringoptional
Grid ref (UK)grid_ref_UK

Ordnance Survey (UK) grid reference for the mountain, passed to {{gbm4ibx}}.

Stringoptional
Notes for grid_ref_UKgrid_ref_UK_note

Notes for grid_ref_UK, e.g., a citation.

Unknownoptional
Grid ref (Ireland)grid_ref_Ireland

Ordnance Survey(Ireland) grid reference for the mountain, passed to {{iem4ibx}}.

Stringoptional
Notes for grid_ref_Irelandgrid_ref_Ireland_note

Notes for grid_ref_Ireland, e.g., a citation.

Unknownoptional
Coordinate typecoord_type

Type, from [[Wikipedia:WikiProject Geographical coordinates/type:]].

Default
mountain
Stringoptional
Regionregion_code

Either a two character ISO 3166-1 alpha-2 country code or an ISO 3166-2 region code. See [[Wikipedia:COORD REGION]].

Lineoptional
Sourcesource

The source of the coordinate data. See [[Wikipedia:COORD SOURCE]].

Stringoptional
Formatformat

Format to display degrees in the coordinate listing. dms for degree, minutes, second output (the default), or dec for decimal degree output.

Default
dms
Lineoptional
Coordinates refcoordinates_ref coordinates_note coords_ref

For any references regarding the coordinates reported. <ref> </ref> tags must be used.

Stringoptional
Typetype

The type of mountain — see List of mountain types.

Lineoptional
Ageage

Age of the rock. Geologic time scales may be useful here.

Lineoptional
Volcanic arcvolcanic_arc

If the mountain is a volcano, arc in which it is situated.

Stringoptional
Volcanic beltvolcanic_belt

If the mountain is a volcano, belt in which it is situated.

Stringoptional
Volcanic fieldvolcanic_field

If the mountain is a volcano, field in which it is situated.

Stringoptional
Volcanic arc/beltvolcanic_arc/belt

If the mountain is a volcano, arc/belt in which it is situated.

Stringoptional
Last eruptionlast_eruption

The date of the last eruption if the mountain is of volcanic origin. Only use Unknown if a verifiable source such as the Global Volcanism Program states it as such.

Stringoptional
First ascentfirst_ascent

Date of the first ascent, if known. Typically, this is the first recorded ascent but not necessarily the first true ascent. If it is quite probable the peak/mountain was ascended by local people before then, a footnote should be added.

Stringoptional
Easiest routeeasiest_route

The easiest route to the summit. Some possibilities include Hike, Scramble or any of the YDS grades.

Stringoptional
Embeddedembedded

Another Infobox to place within the mountain infobox. The other infobox will show up at the end of the mountain infobox. The other infobox needs to have its "embedded" or "child" parameter set to 1 or yes, as appropriate.

Stringoptional
Childchild

"yes" if the mountain infobox is embedded inside another Infobox

Lineoptional
Map widthmap_size map_width

Width of the map, in pixels. Must be entered as a number. The default value is 250.

Default
250
Numberoptional
Photo sizephoto_size photo_width

Width of the photo, if less than 280px.

Numberoptional
subboxsubbox

no description

Unknownoptional
qidqid

no description

Unknownoptional
suppressfieldssuppressfields

no description

Unknownoptional
fetchwikidatafetchwikidata

no description

Unknownoptional
onlysourcedonlysourced

no description

Unknownoptional
photo_uprightphoto_upright

no description

Unknownoptional
reliefrelief

no description

Unknownoptional
range_coordinatesrange_coordinates range_coords

no description

Unknownoptional
image_mapimage_map

no description

Unknownoptional
mapsizemapsize

no description

Unknownoptional
map_uprightmap_upright

no description

Unknownoptional
highesthighest

no description

Unknownoptional
highest_locationhighest_location

no description

Unknownoptional
refsrefs

no description

Unknownoptional
elevation_noteelevation_note

no description

Unknownoptional
elevation_systemelevation_system

no description

Unknownoptional
isolationisolation

no description

Unknownoptional
isolation_kmisolation_km

no description

Unknownoptional
isolation_miisolation_mi

no description

Unknownoptional
isolation_parentisolation_parent

no description

Unknownoptional
isolation_refisolation_ref

no description

Unknownoptional
length_kmlength_km

no description

Unknownoptional
length_milength_mi

no description

Unknownoptional
width_kmwidth_km

no description

Unknownoptional
width_miwidth_mi

no description

Unknownoptional
area_mi2area_mi2

no description

Unknownoptional
area_km2area_km2

no description

Unknownoptional
lengthlength

no description

Unknownoptional
length_orientationlength_orientation

no description

Unknownoptional
length_reflength_ref

no description

Unknownoptional
length_notelength_note

no description

Unknownoptional
widthwidth

no description

Unknownoptional
width_orientationwidth_orientation

no description

Unknownoptional
width_refwidth_ref

no description

Unknownoptional
width_notewidth_note

no description

Unknownoptional
areaarea

no description

Unknownoptional
area_refarea_ref

no description

Unknownoptional
area_notearea_note

no description

Unknownoptional
volumevolume

no description

Unknownoptional
volume_km3volume_km3

no description

Unknownoptional
volume_mi3volume_mi3

no description

Unknownoptional
volume_refvolume_ref

no description

Unknownoptional
volume_notevolume_note

no description

Unknownoptional
nicknamenickname

no description

Unknownoptional
authorityauthority

no description

Unknownoptional
country_typecountry_type

no description

Unknownoptional
country1country1

no description

Unknownoptional
countrycountry

no description

Unknownoptional
country2country2

no description

Unknownoptional
country3country3

no description

Unknownoptional
country4country4

no description

Unknownoptional
country5country5

no description

Unknownoptional
country6country6

no description

Unknownoptional
country7country7

no description

Unknownoptional
country8country8

no description

Unknownoptional
country9country9

no description

Unknownoptional
country10country10

no description

Unknownoptional
country11country11

no description

Unknownoptional
country12country12

no description

Unknownoptional
country13country13

no description

Unknownoptional
country14country14

no description

Unknownoptional
country15country15

no description

Unknownoptional
country16country16

no description

Unknownoptional
country17country17

no description

Unknownoptional
country18country18

no description

Unknownoptional
subdivision1_typesubdivision1_type

no description

Unknownoptional
state_typestate_type

no description

Unknownoptional
state1state1

no description

Unknownoptional
subdivision1subdivision1

no description

Unknownoptional
statestate

no description

Unknownoptional
state2state2

no description

Unknownoptional
state3state3

no description

Unknownoptional
state4state4

no description

Unknownoptional
state5state5

no description

Unknownoptional
state6state6

no description

Unknownoptional
state7state7

no description

Unknownoptional
state8state8

no description

Unknownoptional
state9state9

no description

Unknownoptional
state10state10

no description

Unknownoptional
state11state11

no description

Unknownoptional
state12state12

no description

Unknownoptional
state13state13

no description

Unknownoptional
state14state14

no description

Unknownoptional
state15state15

no description

Unknownoptional
state16state16

no description

Unknownoptional
state17state17

no description

Unknownoptional
state18state18

no description

Unknownoptional
subdivision2_typesubdivision2_type

no description

Unknownoptional
region_typeregion_type

no description

Unknownoptional
region1region1

no description

Unknownoptional
subdivision2subdivision2

no description

Unknownoptional
regionregion

no description

Unknownoptional
region2region2

no description

Unknownoptional
region3region3

no description

Unknownoptional
region4region4

no description

Unknownoptional
region5region5

no description

Unknownoptional
region6region6

no description

Unknownoptional
region7region7

no description

Unknownoptional
region8region8

no description

Unknownoptional
region9region9

no description

Unknownoptional
region10region10

no description

Unknownoptional
region11region11

no description

Unknownoptional
region12region12

no description

Unknownoptional
region13region13

no description

Unknownoptional
region14region14

no description

Unknownoptional
region15region15

no description

Unknownoptional
region16region16

no description

Unknownoptional
region17region17

no description

Unknownoptional
region18region18

no description

Unknownoptional
region19region19

no description

Unknownoptional
region20region20

no description

Unknownoptional
region21region21

no description

Unknownoptional
region22region22

no description

Unknownoptional
region23region23

no description

Unknownoptional
subdivision3_typesubdivision3_type

no description

Unknownoptional
district_typedistrict_type

no description

Unknownoptional
district1district1

no description

Unknownoptional
subdivision3subdivision3

no description

Unknownoptional
districtdistrict

no description

Unknownoptional
district2district2

no description

Unknownoptional
district3district3

no description

Unknownoptional
district4district4

no description

Unknownoptional
district5district5

no description

Unknownoptional
district6district6

no description

Unknownoptional
district7district7

no description

Unknownoptional
district8district8

no description

Unknownoptional
district9district9

no description

Unknownoptional
district10district10

no description

Unknownoptional
district11district11

no description

Unknownoptional
district12district12

no description

Unknownoptional
district13district13

no description

Unknownoptional
district14district14

no description

Unknownoptional
district15district15

no description

Unknownoptional
district16district16

no description

Unknownoptional
district17district17

no description

Unknownoptional
district18district18

no description

Unknownoptional
subdivision4_typesubdivision4_type

no description

Unknownoptional
part_typepart_type

no description

Unknownoptional
part1part1

no description

Unknownoptional
subdivision4subdivision4

no description

Unknownoptional
partpart

no description

Unknownoptional
part2part2

no description

Unknownoptional
part3part3

no description

Unknownoptional
part4part4

no description

Unknownoptional
part5part5

no description

Unknownoptional
part6part6

no description

Unknownoptional
part7part7

no description

Unknownoptional
part8part8

no description

Unknownoptional
part9part9

no description

Unknownoptional
part10part10

no description

Unknownoptional
part11part11

no description

Unknownoptional
part12part12

no description

Unknownoptional
part13part13

no description

Unknownoptional
part14part14

no description

Unknownoptional
part15part15

no description

Unknownoptional
part16part16

no description

Unknownoptional
part17part17

no description

Unknownoptional
part18part18

no description

Unknownoptional
part19part19

no description

Unknownoptional
settlement_typesettlement_type

no description

Unknownoptional
city_typecity_type

no description

Unknownoptional
settlement1settlement1

no description

Unknownoptional
city1city1

no description

Unknownoptional
settlementsettlement

no description

Unknownoptional
citycity

no description

Unknownoptional
settlement2settlement2

no description

Unknownoptional
city2city2

no description

Unknownoptional
settlement3settlement3

no description

Unknownoptional
city3city3

no description

Unknownoptional
settlement4settlement4

no description

Unknownoptional
city4city4

no description

Unknownoptional
settlement5settlement5

no description

Unknownoptional
city5city5

no description

Unknownoptional
settlement6settlement6

no description

Unknownoptional
city6city6

no description

Unknownoptional
settlement7settlement7

no description

Unknownoptional
city7city7

no description

Unknownoptional
settlement8settlement8

no description

Unknownoptional
city8city8

no description

Unknownoptional
settlement9settlement9

no description

Unknownoptional
city9city9

no description

Unknownoptional
settlement10settlement10

no description

Unknownoptional
city10city10

no description

Unknownoptional
settlement11settlement11

no description

Unknownoptional
city11city11

no description

Unknownoptional
settlement12settlement12

no description

Unknownoptional
city12city12

no description

Unknownoptional
settlement13settlement13

no description

Unknownoptional
city13city13

no description

Unknownoptional
settlement14settlement14

no description

Unknownoptional
city14city14

no description

Unknownoptional
settlement15settlement15

no description

Unknownoptional
city15city15

no description

Unknownoptional
settlement16settlement16

no description

Unknownoptional
city16city16

no description

Unknownoptional
settlement17settlement17

no description

Unknownoptional
city17city17

no description

Unknownoptional
settlement18settlement18

no description

Unknownoptional
city18city18

no description

Unknownoptional
range_coordinates_refrange_coordinates_ref

no description

Unknownoptional
range_coordinates_noterange_coordinates_note

no description

Unknownoptional
parentparent

no description

Unknownoptional
borders_onborders_on

no description

Unknownoptional
borderborder

no description

Unknownoptional
border1border1

no description

Unknownoptional
border2border2

no description

Unknownoptional
border3border3

no description

Unknownoptional
border4border4

no description

Unknownoptional
border5border5

no description

Unknownoptional
border6border6

no description

Unknownoptional
border7border7

no description

Unknownoptional
border8border8

no description

Unknownoptional
grid_ref_UK_refgrid_ref_UK_ref

no description

Unknownoptional
grid_ref_Ireland_refgrid_ref_Ireland_ref

no description

Unknownoptional
topo_makertopo_maker

no description

Unknownoptional
topo_maptopo_map

no description

Unknownoptional
biomebiome

no description

Unknownoptional
formed_byformed_by

no description

Unknownoptional
orogenyorogeny

no description

Unknownoptional
periodperiod

no description

Unknownoptional
period1period1

no description

Unknownoptional
period2period2

no description

Unknownoptional
period3period3

no description

Unknownoptional
period4period4

no description

Unknownoptional
period5period5

no description

Unknownoptional
mountain_typemountain_type

no description

Unknownoptional
geologygeology rock

no description

Unknownoptional
geology1geology1

no description

Unknownoptional
geology2geology2

no description

Unknownoptional
geology3geology3

no description

Unknownoptional
geology4geology4

no description

Unknownoptional
geology5geology5

no description

Unknownoptional
volcanic_regionvolcanic_region

no description

Unknownoptional
normal_routenormal_route

no description

Unknownoptional
accessaccess

no description

Unknownoptional
modulemodule

no description

Unknownoptional
nocat_wdimagenocat_wdimage

no description

Unknownoptional
Show mapframe mapmapframe

Specify yes or no to show or hide the map, overriding the default

Default
no
Example
yes
Stringsuggested
Mapframe captionmapframe-caption

Caption for the map. If mapframe-geomask is set, then the default is "Location in <<geomask's label>>"

Stringoptional
Custom mapframemapframe-custom

Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.

Templateoptional
Mapframe Wikidata itemmapframe-id id qid

Id (Q-number) of Wikidata item to use.

Default
(item for current page)
Stringoptional
Mapframe coordinates mapframe-coordinates mapframe-coord coordinates coord

Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template.

Default
(coordinates from Wikidata)
Example
{{Coord|12.34|N|56.78|E}}
Templateoptional
Mapframe shapes from Wikidatamapframe-wikidata

et to yes to show shape/line features from the wikidata item, if any, when coordinates are specified by parameter

Example
yes
Stringoptional
Mapframe shape featuremapframe-shape

Override display of mapframe shape feature. Turn off by setting to "none". Use an inverse shape (geomask) instead of a regular shape by setting to "inverse"

Stringoptional
Mapframe point featuremapframe-point

Override display of mapframe point feature. Turn off display of point feature by setting to "none". Force point marker to be displayed by setting to "on"

Stringoptional
Mapframe geomaskmapframe-geomask

Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)

Example
Q100
Page nameoptional
Mapframe switchermapframe-switcher

Set to "auto" or "geomasks" or "zooms" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average.

Stringoptional
Mapframe widthmapframe-frame-width mapframe-width

Frame width in pixels

Default
270
Numberoptional
Mapframe heightmapframe-frame-height mapframe-height

Frame height in pixels

Default
200
Numberoptional
Mapframe shape fillmapframe-shape-fill

Color used to fill shape features

Default
#606060
Stringoptional
Mapframe shape fill opacitymapframe-shape-fill-opacity

Opacity level of shape fill, a number between 0 and 1

Default
0.5
Numberoptional
Mapframe stroke colormapframe-stroke-color mapframe-stroke-colour

Color of line features, and outlines of shape features

Default
#ff0000
Stringoptional
Mapframe stroke widthmapframe-stroke-width

Width of line features, and outlines of shape features

Default
5
Numberoptional
Mapframe markermapframe-marker

Marker symbol to use for coordinates; see [[mw:Help:Extension:Kartographer/Icons]] for options

Example
museum
Stringoptional
Mapframe marker colormapframe-marker-color mapframe-marker-colour

Background color for the marker

Default
#5E74F3
Stringoptional
Mapframe geomask stroke colormapframe-geomask-stroke-color mapframe-geomask-stroke-colour

Color of outline of geomask shape

Default
#555555
Stringoptional
Mapframe geomask stroke widthmapframe-geomask-stroke-width

Width of outline of geomask shape

Default
2
Numberoptional
Mapframe geomask fillmapframe-geomask-fill

Color used to fill outside geomask features

Default
#606060
Stringoptional
Mapframe geomask fill opacitymapframe-geomask-fill-opacity

Opacity level of fill outside geomask features, a number between 0 and 1

Default
0.5
Numberoptional
Mapframe zoommapframe-zoom

Set the zoom level, from "1" to "18", to used if the zoom level cannot be determined automatically from object length or area

Default
10
Example
12
Numberoptional
Mapframe length (km)mapframe-length_km

Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

Numberoptional
Mapframe length (mi)mapframe-length_mi

Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

Numberoptional
Mapframe area (km^2)mapframe-area_km2

Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

Numberoptional
Mapframe area (mi^2)mapframe-area_mi2

Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

Numberoptional
Mapframe frame coordinatesmapframe-frame-coordinates mapframe-frame-coord

Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}

Example
{{Coord|12.35|N|56.71|E}}
Templateoptional
mapframe-linemapframe-line

no description

Unknownoptional

Microformat

edit

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

edit

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

edit

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

edit

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.