 | This is not a Wikipedia article: It is an individual user's work-in-progress page, and may be incomplete and/or unreliable. For guidance on developing this draft, see Wikipedia:So you made a userspace draft. Find sources: Google (books · news · scholar · free images · WP refs) · FENS · JSTOR · TWL |
Wort /ˈwɜːrt/ is the liquid extracted from the mashing process during the brewing of beer or whisky. Wort contains the sugars that will be fermented by the brewing yeast to produce alcohol.
Production
edit
The first step in wort production is to make malt from dried, sprouted barley. The malt is then run through a roller mill and cracked. This cracked grain is then mashed, that is, mixed with hot water and steeped, a slow heating process that enables enzymes to convert the starch in the malt into sugars. At set intervals, most notably when the mixture has reached temperatures of 45, 62 and 73 °C (113, 144 and 163 °F),[1] the heating is briefly halted. The temperature of the mixture is usually increased to 78 °C (172 °F) for mashout. Lautering is the next step, which means the sugar-extracted grist or solids remaining in the mash are separated from the liquid wort. In homebrewing, the malt-making and mashing steps can be skipped by adding malt extract to water.[2]
There are diffrent expressions for the wort depending on progress in the brewing process. In the beginning, the so called first wort, which contains the most of the sugar extract gets conveyed from the lauter tun into the brewing vessel. At this point some beer producer give the first hop addition. The hopping of the first wort has various advantages such as: High yield of isomerizised alpha acid which is reliable for the bitter taste of the beer and high yield of hop aroma.
The mixture is then boiled to sanitize the wort and, in the case of most beer production, to extract the bittering, flavour and aroma from hops. In beer making, the wort is known as "sweet wort" until the hops have been added, after which it is called "hopped or bitter wort". The addition of hops is generally done in three parts at set times. The bittering hops, added first, are boiled in the wort for approximately one hour to one and a half hours. This long boil extracts resins, which provides the bittering. Then, the flavouring hops are added, typically 15 minutes from the end of the boil. The finishing hops are added last, toward the end of or after the boil. This extracts the oils, which provide flavour and aroma but evaporate quickly. In general, hops provide the most flavouring when boiled for approximately 15 minutes, and the most aroma when not boiled at all.
At the end of boiling, the hot wort is quickly cooled (in homebrewing, often using an immersion chiller) to a temperature favourable to the yeast. Once sufficiently cooled, the yeast is added, or "pitched", to begin the fermentation process.
The adjunct grains that can be added to the mash include wheat, corn, rye, and rice. Adjunct grains may first need gelatinization and cooling.[3] They are used to create varietal beers such as wheat beer and oatmeal stout, to create grain whisky, or to lighten the body (and cut costs) as in commercial, mass-produced pale lagers.
16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)16:31, 29 November 2016 (UTC)
Modern wort cooking systems:
edit1: Dynamic low pressure wort cooker:
The wort is cooked und low overpressure (ca. 2,18psi) --> Temperature rises to 216 - 223°F.
The pressure is hold for about 2 minutes and then reduced to 0,73psi --> evaporation of unwanted aromas
This process is repeated for 5 to 10 times.
2. Merlin:
The wort is removed from the Whirlpool and then pumped over a conical heated area --> evaporation of unwanted aromas.
This process is repeated up to 6 times.
3. Sparecooking:
The wort is kept hot for 60 minutes at 205 - 209°F --> sterilisation, isomerisation, protein tanning compound precipitation.
The evaporation of the unwanted aromas happens unter vacuum at an expansion vessel.
4. High temperature wort cooker:
The wort is pumped from a flow tube in to 3 heat exchangers. The first one heats the wort up to 194°F, the second one up to 230°F and the third one 266°F. After that the wort is send over a heat retention for about 5 to 7 minutes. Afterwards the wort is pumped into two consecutive expansion vessel, where it is chilled down to 212°F.
References
edit- ^ "Abdijbieren. Geestrijk erfgoed" by Jef Van den Steen
- ^ Nachel, Marty (2008). Homebrewing for dummies. New York: Wiley. p. 47. ISBN 0-470-23062-2. Retrieved April 1, 2011.
Basically, all you need to do is add malt extract to water and boil it. I may be oversimplifying the process just a tad ...
- ^ Papazian, Charlie (1998). Zymurgy for the homebrewer and beer lover: the best articles and advice from America's #1 home brewing magazine. New York, N.Y: Avon books. ISBN 0-380-79399-7. Retrieved March 31, 2011.