The Princess is a version of the Austin A99 Westminster produced by BMC from 1959 to 1968, latterly under the Vanden Plas marque.
The model was launched in October 1959 under the name Princess 3-litre.[1] From July 1960, these vehicles bore the name Vanden Plas Princess 3-litre, Vanden Plas having become a badge-engineered brand in its own right instead of being known as a coachbuilder for cars of other manufacturers. The 3-litre was superseded by the Vanden Plas Princess 4-litre R in 1964.
The Princess was a great deal smaller and less than 44 per cent of the price of the older Princess IV Saloon, which was also to continue until 1968.
Princess 3-litre
editPrincess 3-litre (1959–1960) Vanden Plas Princess 3-litre (1960–1964) | |
---|---|
Overview | |
Manufacturer | BMC |
Also called | Austin Princess 3-litre (Australia) [2] |
Production | 1959–1964 |
Designer | Pininfarina |
Body and chassis | |
Class | Full-size car |
Body style | 4-door saloon |
Layout | FR layout |
Related | Austin Westminster Wolseley 6/99 |
Powertrain | |
Engine | 2.9 L C-Series I6 (1959-1964) |
Dimensions | |
Wheelbase | 84 in (2,134 mm)[3] 1959–1961 86 in (2,184 mm)[4] 1961–1964 |
Length | 187.75 in (4,769 mm)[3] |
Width | 68.5 in (1,740 mm)[3] |
Height | 59 in (1,499 mm)[3] |
Chronology | |
Predecessor | Austin A105 Vanden Plas |
Successor | Vanden Plas Princess 4-litre R |
The 3-litre was largely identical to the Pininfarina-designed Austin A99 Westminster and Wolseley 6/99 which used the same chassis and body. The Princess was given its own identity with a special Vanden Plas grille (fairly square, with a thick surround and vertical slats), round headlamps, and horn grilles on the front. The interior was lavish in typical Vanden Plas style, featuring burr walnut wood trim, leather seats and panels, and high-quality carpeting. A division between the driver and the rear compartment was an optional extra. Initially, it was powered by BMC's 3-litre C-Series engine, developing 108 hp (81 kW).
A Vanden Plas Princess 3-litre with automatic transmission was tested by the British magazine The Motor in 1961 and had a top speed of 99.3 mph (159.8 km/h). It could accelerate from 0-60 mph (97 km/h) in 16.1 seconds while fuel consumption of 21.1 miles per imperial gallon (13.4 L/100 km; 17.6 mpg‑US) was recorded. The test car cost £1,467 including taxes.[3]
This model was replaced in 1961 by the Vanden Plas Princess 3-litre Mark II. Styling was similar but the wheelbase was two inches (5 cm) longer and anti-roll bars were added to the suspension at both ends of the car. The engine was uprated to 120 hp (89 kW). Better brakes were fitted, and interior improvements included built-in drop-down "picnic tables" for the rear seat passengers. Options now included "Smith's air-conditioning".
Engine specifications
editYears | Engine | Model | Power | Torque | Top Speed | 0-60 mph |
Transmission | Economy |
---|---|---|---|---|---|---|---|---|
1959–1961 | 2,912 cc OHV I6 | BMC C-series | 103 hp (77 kW) at 4750 rpm | 157 lb⋅ft (213 N⋅m) at 2300 rpm | 97 mph (156 km/h) | 17.9 s | 3-speed manual, overdrive on top 2 gears 3-speed automatic |
17.0 mpg‑imp (16.6 L/100 km) |
1961–1964 | 120 hp (89 kW) at 4750 rpm | 163 lb⋅ft (221 N⋅m) at 2750 rpm | 105 mph (169 km/h) | 16.9 s | 18.0 mpg‑imp (15.7 L/100 km) |
This model was discontinued in 1964 and replaced by a new Rolls-Royce powered model.
-
Vanden Plas Princess 3-litre Mark II
-
Vanden Plas Princess 3-litre Mark II
-
Vanden Plas Princess 3-litre Mark II
Vanden Plas Princess R
editVanden Plas Princess R (1964-1968) | |
---|---|
Overview | |
Manufacturer | BMC |
Production | 1964–1968 |
Assembly | Kingsbury, United Kingdom [7] South Africa [7] |
Designer | Pininfarina |
Body and chassis | |
Class | Full-size car |
Body style | 4-door saloon |
Layout | FR layout |
Related | Austin Westminster Wolseley 6/110 |
Powertrain | |
Engine | 3.9 L Rolls-Royce IOE I6 |
Dimensions | |
Wheelbase | 86 in (2,184 mm)[4] |
Length | 187.75 in (4,769 mm)[3] |
Width | 68.5 in (1,740 mm)[3] |
Height | 59 in (1,499 mm)[3] |
Chronology | |
Predecessor | Vanden Plas Princess 3-litre |
Successor | None |
The Vanden Plas Princess R with its Rolls-Royce all-aluminium 175 bhp engine was announced in August 1964. With an unusually high power to weight ratio the car gave easy cruising at 90+ mph and was capable of 112 mph.
While there were some significant exterior alterations, the big change was under the bonnet where there was a result of more than two years technical collaboration between BMC and Rolls-Royce. The aluminium Rolls-Royce FB60 engine was a short-stroke version of the B series engine: 4, 6 and 8 cylinder units of which more than 30,000 had already been produced.[8] The 6-cylinder engine weighed only 450 lb (204 kg).[9] Its cubic capacity was 3.909 litres (239 cu in). Over-square: bore was 95.25 mm (3.8 in), stroke 91.44 mm (3.6 in); with a 7.8:1 compression ratio its output was 175 bhp (130 kW; 177 PS) @4,800 rpm. Twin SU carburettors were fitted. Both block and head were aluminium, tappets were hydraulic self-adjusting operating on overhead inlet and side exhaust valves. The counterbalanced crankshaft ran in seven bearings.[10]
The 4-litre R was replete with polished walnut fascia padded top and bottom, hide upholstered seats with fully reclinable backs and polished picnic tables for the rear passengers. A new automatic transmission was provided, Borg-Warner model 8, its first use in a British car and Hydrosteer variable ratio power steering accompanied wider tyres. Externally the fog lamps were moved up by the grille, the hindquarters tidied extended and adjusted to look more substantial and the tailfins replaced by small corner-ridges.[8]
Engine specifications
editYears | Manufacturer | Model | Engine | Power | Torque | Top Speed | 0-60 mph |
Economy |
---|---|---|---|---|---|---|---|---|
1964–1968 | Rolls-Royce IOE | 3.9 Automatic | 3,909 cc - L6 - NA | 177 PS (130 kW) | 296 N⋅m (218 lb⋅ft) | 112 mph (180 km/h) | 12.7 s | 15.0 mpg‑imp (18.8 L/100 km) |
Pricing
editThe background to the pricing was that from April 1961 tax relief on company cars was allowed only up to £2,000.[9]
The new car was priced on a par with the curvaceous Jaguar Mark X (albeit only the manual transmission model of the Jaguar[citation needed]) and 50 per cent more than its apparent predecessor the 3-litre car. It was a major change of market positioning aimed at the growing prestige and executive market in Europe and the United States. However, its close appearance to its predecessor and its pricing (near to that of the Jaguar, which was bigger with a far more advanced chassis design and more prestigious, though itself without a useful market in the United States), doomed it to failure[citation needed].
- £1,346 (discontinued Vanden Plas Princess Mark II)
- £1,994 Vanden Plas Princess 4-litre R
- £2,022 Jaguar Mark X
- £5,517 Rolls-Royce Silver Cloud III[8]
Production
editJoint production capacity of 12,000 cars a year was provided, (although actual production was never more than a fraction of this) and final assembly and hand finishing was at the Vanden Plas works in Kingsbury London.
The Vanden Plas Princess 4-litre R remained in production until 1968, just ahead of BMC's merge into British Leyland. 6,687 vehicles were produced at Kingsbury and an additional 312 C.K.D. kits were exported to South Africa bringing total production to 6,999 units.[7] It was the only mass-produced civilian vehicle from another manufacturer ever to use a Rolls-Royce engine.[4]
The late Queen Elizabeth ll owned an estate model of the Vanden Plas Princess, of which it was estimated between 4 and 7 were built.
-
Front view showing newly positioned fog lamps and wider tyres
-
Rear view showing new horizontal lighting arrangement
-
Rear three-quarter view showing revised roofline
Rolls-Royce Java
editThis car was a result of a joint BMC / Rolls-Royce project for a smaller Bentley code-named Java. Prototypes were made using the Austin-engineered central portion of the Vanden Plas, with restyled Rolls-Royce and Bentley panels front and rear. Neither of these models made it into production. Rolls-Royce withdrew from the venture. They had been covering the possibility that the survival of their motor car division might depend on providing a relatively compact mass-produced Rolls-Royce. However 1965's introduction of the Rolls-Royce Silver Shadow was a success.[12]
References
edit- ^ Vanden Plas 4 Litre R, www.uniquecarsandparts.com.au Retrieved on 6 February 2013
- ^ 1961 Austin Princess 3-Litre Saloon BMC Aussie Original Magazine Advertisement, www.flickr.com Retrieved 8 October 2019
- ^ a b c d e f g h "The Vanden Plas Three-litre Princess". The Motor. 5 April 1961.
- ^ a b c "Used Car Test: 1964 Vanden Plas Princess R". Autocar. Vol. 128 nbr 3761. 14 March 1968. pp. 50–51.
- ^ "Vanden Plas Princess 3 Litre (1960 - 1961)". The Cambridge-Oxford Owners Club. Retrieved 20 September 2019.
- ^ "Vanden Plas Princess 3 Litre MkII (1961 - 1964)". The Cambridge-Oxford Owners Club. Retrieved 20 September 2019.
- ^ a b c Vanden Plas Princess 4 Litre R, www.vpoc.info Retrieved 8 October 2019
- ^ a b c Rolls-Royce Engine In New B.M.C. 112 mph Saloon. The Times, Wednesday, 19 August 1964; pg. 5; Issue 56094
- ^ a b Rolls-B.M.C. Marriage Proving A Happy One from Our Motoring Correspondent-Crewe, Feb. 28. The Times, Monday, Mar 01, 1965; pg. 7
- ^ Display Advertising BMC. The Times, Wednesday, 19 August 1964; pg. 7; Issue 56094
- ^ Specifications: 1964 Vanden Plas Princess 4-Litre R, www.uniquecarsandparts.com.au
- ^ "When Rolls-Royce and Bentley worked with BMC on new luxury cars". AROnline. 4 December 2016. Retrieved 7 December 2020.