Victoria Dam (Sri Lanka)

(Redirected from Victoria Dam, Sri Lanka)

Victoria Dam (Sinhala: වික්ටෝරියා වේල්ල Viktoriya Vella) is an arch dam located 130 mi (209 km) upstream of the Mahaweli River's mouth and 4 mi (6 km) from Teldeniya. It is named in honour of Queen Victoria of the United Kingdom.

Victoria Dam
වික්ටෝරියා වේල්ල
The dam on 15 April 2011. Three days after its 26th anniversary of opening.
Victoria Dam (Sri Lanka) is located in Sri Lanka
Victoria Dam (Sri Lanka)
Location of Victoria Dam
වික්ටෝරියා වේල්ල in Sri Lanka
CountrySri Lanka
LocationTeldeniya
Coordinates07°14′29″N 80°47′05″E / 7.24139°N 80.78472°E / 7.24139; 80.78472
PurposePower
StatusOperational
Construction began14 August 1978; 46 years ago (1978-08-14)
Opening date14 April 1985 (1985-04-14)
Dam and spillways
Type of damArch dam
ImpoundsMahaweli River
Height (foundation)122 m (400 ft)
Length520 m (1,706 ft)
Width (base)25 m (82 ft)
Spillways8
Spillway capacity8,200 m3/s (289,580 cu ft/s)
Reservoir
CreatesVictoria Reservoir
Total capacity722,000,000 m3 (2.55×1010 cu ft)
Active capacity689,000,000 m3 (2.43×1010 cu ft)
Catchment area1,869 km2 (722 sq mi)
Surface area23 km2 (9 sq mi)
Victoria Power Station
Coordinates07°12′00″N 80°48′21″E / 7.20000°N 80.80583°E / 7.20000; 80.80583
Turbines3 × 70 MW
Installed capacity210 MW
Capacity factor42.4%
Annual generation780 GWh

Its main purposes are irrigation and hydroelectric power production. It is the tallest dam in Sri Lanka, and supports a 210 MW power station, the largest hydroelectric power station in the country. Construction of the dam commenced in 1978, funded by aid granted by the United Kingdom under the patronage of Queen Elizabeth II, was completed during the incumbency of President Junius Richard Jayewardene, and was ceremonially opened by the Prime Minister of the United Kingdom, Margaret Thatcher.

History

edit

The Victoria Dam was constructed under the Accelerated Mahaweli Development Programme (AMDP). The project had been in planning for 30 years but was accelerated in 1977 to address economic difficulties within the country. The plan is designed to irrigate 365,000 ha (901,935 acres) of land and provide 600 MW of electricity. The Victoria Dam was originally proposed in 1964 after studies were completed by Canada's Huntings Technical Services and a team from the United Nations Development ProgramFood and Agriculture Organization (UNDP-FAO).[1] Construction of the dam was inaugurated on 14 August 1978, by the then-President Jayewardene with the implementation of the main structures beginning in 1980. Its completion was marked by a ceremony on 12 April 1985. Construction of the dam and tunnel was completed by the British Joint Venture of Balfour Beatty and Edmund Nuttall, while Costain Group carried out the construction of the power station.[2] The consultant engineers on the project was Sir Alexander Gibb & Partners.[3] The dam project resettled about 30,000 people — four times the estimate.[4]

Dam and powerhouse

edit

The dam measures 122 m (400 ft) tall, with a crest length of 520 m (1,706 ft), crest width of 6 m (20 ft), and a base width of 25 m (82 ft). The dam creates the Victoria Reservoir, which has a surface area of 22.7 km2 (8.8 sq mi), gross storage capacity of 722,000,000 m3 (2.55×1010 cu ft), and a catchment area of 1,869 km2 (722 sq mi).[2]

Water from the dam is fed to the powerhouse at 07°12′00″N 80°48′21″E / 7.20000°N 80.80583°E / 7.20000; 80.80583 (Victoria Power Station) via a 5,646 m (18,524 ft) long tunnel, which houses three penstocks of 6.2 m (20.3 ft) diameter. These penstocks created a net head of 190 m (623 ft), feeding three 70 MW 12.5 kV turbines, which are capable of generating up to 780 GWh of electrical energy annually.

The dam consists of eight spillways, each with a width and height of 12.5 m (41 ft) and 6.5 m (21.3 ft), which automatically opens when water levels are high. The dam's gates, which need power only to close, won an award for "Innovative Design in Civil Engineering" by the Institution of Civil Engineers. The total effective width of the spillways is 100 m (328 ft), allowing a maximum discharge of 8,200 m3/s (289,580 cu ft/s). Two additional low-level sluices at the base of the dam allows the purging of accumulated silts behind the dam.[2]

edit
A panoramic view of the Victoria Dam and Reservoir.

See also

edit

References

edit
  1. ^ "Mahaweli Projects & Programme 1983" (PDF). USAID. Retrieved 1 May 2011.
  2. ^ a b c "Victoria Dam". Mahaweli Authority of Sri Lanka. Archived from the original on 20 February 2010. Retrieved 25 April 2011.
  3. ^ "Victoria Dam and Hydro-Electric project". Central Engineering Consultant Bureau. Retrieved 28 October 2012.
  4. ^ "Victoria Project: Sri Lanka" (PDF). UK Department for International Development. Retrieved 1 May 2011.