Wikipedia

List of laser applications

(Redirected from Weaponized lasers)

Many scientific, military, medical and commercial laser applications have been developed since the invention of the laser in 1958. The coherency, high monochromaticity, and ability to reach extremely high powers are all properties which allow for these specialized applications.

Laser pointers in different colours

Scientific

edit

In science, lasers are used in many ways, including:

Lasers may also be indirectly used in spectroscopy as a micro-sampling system, a technique termed Laser ablation (LA), which is typically applied to ICP-MS apparatus resulting in the powerful LA-ICP-MS.

The principles of laser spectroscopy are discussed by Demtröder.[3]

Spectroscopy

edit

Most types of laser are an inherently pure source of light; they emit near-monochromatic light with a very well defined range of wavelengths. By careful design of the laser components, the purity of the laser light (measured as the "linewidth") can be improved more than the purity of any other light source. This makes the laser a very useful source for spectroscopy. The high intensity of light that can be achieved in a small, well collimated beam can also be used to induce a nonlinear optical effect in a sample, which makes techniques such as Raman spectroscopy possible. Other spectroscopic techniques based on lasers can be used to make extremely sensitive detectors of various molecules, able to measure molecular concentrations in the parts-per-1012 (ppt) level. Due to the high power densities achievable by lasers, beam-induced atomic emission is possible: this technique is termed Laser induced breakdown spectroscopy (LIBS).

Heat treatment

edit

Heat treating with the lasers allows selective surface hardening against wear with little or no distortion of the component. Because this eliminates much part reworking that is currently done, the laser system's capital cost is recovered in a short time. An inert, absorbent coating for laser heat treatment has also been developed that eliminates the fumes generated by conventional paint coatings during the heat-treating process with CO2 laser beams.

One consideration crucial to the success of a heat treatment operation is control of the laser beam irradiance on the part surface. The optimal irradiance distribution is driven by the thermodynamics of the laser-material interaction and by the part geometry.

Typically, irradiances between 500 and 5000 W/cm^2 satisfy the thermodynamic constraints and allow the rapid surface heating and minimal total heat input required. For general heat treatment, a uniform square or rectangular beam is one of the best options. For some special applications or applications where the heat treatment is done on an edge or corner of the part, it may be better to have the irradiance decrease near the edge to prevent melting.

Weather

edit

Research shows that scientists may one day be able to induce rain and lightning storms (as well as micro-manipulating some other weather phenomena) using high energy lasers. Such a breakthrough could potentially eradicate droughts, help alleviate weather related catastrophes, and allocate weather resources to areas in need.[4][5]

Lunar laser ranging

edit
Main article: Lunar laser ranging experiment

When the Apollo astronauts visited the Moon, they planted retroreflector arrays to make possible the Lunar Laser Ranging Experiment. Laser beams are focused through large telescopes on Earth aimed toward the arrays, and the time taken for the beam to be reflected back to Earth measured to determine the distance between the Earth and Moon with high accuracy.

Photochemistry

edit

Some laser systems, through the process of mode locking, can produce extremely brief pulses of light - as short as picoseconds or femtoseconds (10−12 - 10−15 seconds). Such pulses can be used to initiate and analyze chemical reactions, a technique known as photochemistry. The short pulses can be used to probe the process of the reaction at a very high temporal resolution, allowing the detection of short-lived intermediate molecules. This method is particularly useful in biochemistry, where it is used to analyse details of protein folding and function.

Laser scanner

edit
Main article: Barcode reader

Laser barcode scanners are ideal for applications that require high speed reading of linear codes or stacked symbols.

Laser cooling

edit
Main article: Laser cooling

A technique that has recent success is laser cooling. This involves atom trapping, a method where a number of atoms are confined in a specially shaped arrangement of electric and magnetic fields. Shining particular wavelengths of light at the ions or atoms slows them down, thus cooling them. As this process is continued, they all are slowed and have the same energy level, forming an unusual arrangement of matter known as a Bose–Einstein condensate.

Nuclear fusion

edit
Main article: Inertial confinement fusion

Some of the world's most powerful and complex arrangements of multiple lasers and optical amplifiers are used to produce extremely high intensity pulses of light of extremely short duration, e.g. laboratory for laser energetics, National Ignition Facility, GEKKO XII, Nike laser, Laser Mégajoule, HiPER. These pulses are arranged such that they impact pellets of tritium–deuterium simultaneously from all directions, hoping that the squeezing effect of the impacts will induce atomic fusion in the pellets. This technique, known as "inertial confinement fusion", so far has not been able to achieve "breakeven", that is, so far the fusion reaction generates less power than is used to power the lasers, however; experiments at the National Ignition Facility were able to demonstrate fusion reactions that generate more energy than was contained within the lasers driving the reaction.[6]

Particle acceleration

edit
Main article: Plasma acceleration

Powerful lasers producing ultra-short (in the tens of femtoseconds) and ultra-intense (up to 1023 W/cm2) laser pulses offer much greater acceleration gradients than that of conventional accelerators. This fact is exploited in several plasma acceleration techniques used for accelerating both electrons and charged ions to high energies.

Microscopy

edit

Confocal laser scanning microscopy and Two-photon excitation microscopy make use of lasers to obtain blur-free images of thick specimens at various depths. Laser capture microdissection use lasers to procure specific cell populations from a tissue section under microscopic visualization.

Additional laser microscopy techniques include harmonic microscopy, four-wave mixing microscopy[7] and interferometric microscopy.[8]

Military

edit

Directly as an energy weapon

edit

A laser weapon is directed-energy weapon based on lasers.

Defensive countermeasures

edit

Defensive countermeasure applications can range from compact, low power infrared countermeasures to high power, airborne laser systems. IR countermeasure systems use lasers to confuse the seeker heads on infrared homing missiles.

Disorientation

edit

Some weapons simply use a laser to disorient a person. One such weapon is the Thales Green Laser Optical Warner.[9]

Guidance

edit

Laser guidance is a technique of guiding a missile or other projectile or vehicle to a target by means of a laser beam.

Target designator

edit
See also: Laser applications
Main article: Laser designator
 
A target designator

Another military use of lasers is as a laser target designator. This is a low-power laser pointer used to indicate a target for a precision-guided munition, typically launched from an aircraft. The guided munition adjusts its flight-path to home in to the laser light reflected by the target, enabling a great precision in aiming. The beam of the laser target designator is set to a pulse rate that matches that set on the guided munition to ensure munitions strike their designated targets and do not follow other laser beams which may be in use in the area. The laser designator can be shone onto the target by an aircraft or nearby infantry. Lasers used for this purpose are usually infrared lasers, so the enemy cannot easily detect the guiding laser light.

Firearms

edit

Laser sight

edit
 
Laser sight used by the Israel Defense Forces during commando training
 
Smith & Wesson revolver equipped with a laser sight mounted on the trigger guard.

The laser has in most firearms applications been used as a tool to enhance the targeting of other weapon systems. For example, a laser sight is a small, usually visible-light laser placed on a handgun or a rifle and aligned to emit a beam parallel to the barrel. Since a laser beam has low divergence, the laser light appears as a small spot even at long distances; the user places the spot on the desired target and the barrel of the gun is aligned (but not necessarily allowing for bullet drop, windage, distance between the direction of the beam and the axis of the barrel, and the target mobility while the bullet travels).

Most laser sights use a red laser diode. Others use an infrared diode to produce a dot invisible to the naked human eye but detectable with night vision devices. The firearms adaptive target acquisition module LLM01 laser light module combines visible and infrared laser diodes. In the late 1990s, green diode pumped solid state laser (DPSS) laser sights (532 nm) became available.

Eye-targeted lasers

edit

A non-lethal laser weapon was developed by the U.S. Air Force to temporarily impair an adversary's ability to fire a weapon or to otherwise threaten enemy forces. This unit illuminates an opponent with harmless low-power laser light and can have the effect of dazzling or disorienting the subject or causing them to flee. Several types of dazzlers are now available, and some have been used in combat.

There remains the possibility of using lasers to blind, since this requires relatively low power levels and is easily achievable in a man-portable unit. However, most nations regard the deliberate permanent blinding of the enemy as forbidden by the rules of war (see Protocol on Blinding Laser Weapons). Although several nations have developed blinding laser weapons, such as China's ZM-87, none of these are believed to have made it past the prototype stage.

In addition to the applications that cross over with military applications, a widely known law enforcement use of lasers is for lidar to measure the speed of vehicles.

Holographic weapon sight

edit

A holographic weapon sight uses a laser diode to illuminate a hologram of a reticle built into a flat glass optical window of the sight. The user looks through the optical window and sees a cross hair reticle image superimposed at a distance on the field of view.[10]

Medical

edit
See also: Laser medicine

Industrial and commercial

edit
 
Lasers used for visual effects during a musical performance. (A laser light show.)
 
Levelling of ceramic tiles floor with a laser device

Industrial laser applications can be divided into two categories depending on the power of the laser: material processing and micro-material processing.

In material processing, lasers with average optical power above 1 kilowatt are used mainly for industrial materials processing applications. Beyond this power threshold there are thermal issues related to the optics that separate these lasers from their lower-power counterparts.[11] Laser systems in the 50-300W range are used primarily for pumping, plastic welding and soldering applications. Lasers above 300W are used in brazing, thin metal welding, and sheet metal cutting applications. The required brightness (as measured in by the beam parameter product) is higher for cutting applications than for brazing and thin metal welding.[12] High power applications, such as hardening, cladding, and deep penetrating welding, require multiple kW of optical power, and are used in a broad range of industrial processes.

Micro material processing is a category that includes all laser material processing applications under 1 kilowatt.[13] The use of lasers in Micro Materials Processing has found broad application in the development and manufacturing of screens for smartphones, tablet computers, and LED TVs.[14]

A detailed list of industrial and commercial laser applications includes:

Entertainment and recreation

edit

Surveying and ranging

edit
Main articles: Laser rangefinder, Laser level, Laser altimetry, and Satellite laser ranging

Images

edit
  •  
    Laser models in different colours
  •  
    Q-line Lasers
  •  
    Lasers were used in the 2005 Classical Spectacular concert
  •  
    A laser harp
  •  
    The surface of a test target is instantly vaporized and bursts into flame upon irradiation by a high power continuous wave carbon dioxide laser emitting tens of kilowatts of far infrared light. Note the operator is standing behind sheets of plexiglas, which is opaque in the far infrared.

See also

edit

References

edit
  1. ^ "Laser nanofabrication inside silicon with spatial beam modulation and anisotropic seeding". Nat. Commun. 15 (5786). 2024. doi:10.1038/s41467-024-49303-z. PMC 11252398.
  2. ^ Wills, Stewart. "Cassini's Earthbound Partners". Optics and Photonics News. The Optical Society. Archived from the original on 7 July 2018. Retrieved 7 July 2018.
  3. ^ W. Demtröder, Laser Spectroscopy, 3rd Ed. (Springer, 2009)
  4. ^ "California scientists able to control the weather using lasers - www.express.co.uk". 28 September 2017. Archived from the original on 2018-10-23. Retrieved 2018-10-23.
  5. ^ "The man who wants to control the weather with lasers - www.cnn.com". CNN. 24 April 2015. Archived from the original on 2018-10-23. Retrieved 2018-10-23.
  6. ^ "Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment". Phys. Rev. Lett. 132 (6): 065102. doi:10.1103/PhysRevLett.132.065102.
  7. ^ Duarte FJ, ed. (2009). "Chapter 9". Tunable Laser Applications (2nd ed.). Boca Raton: CRC Press.
  8. ^ Duarte FJ (2016). "Tunable Laser Microscopy". In Duarte FJ (ed.). Tunable Laser Applications (3rd ed.). Boca Raton: CRC Press. pp. 315–328. ISBN 9781482261066.
  9. ^ "Thales GLOW". Thalesgroup.com. Archived from the original on 2012-03-23. Retrieved 2011-09-25.
  10. ^ "Red Dot Sights / Reflex Sights & Holosights Explained". ultimak.com. Archived from the original on 2012-12-27. Retrieved 2013-07-27.
  11. ^ "The Worldwide Market for Lasers - Market Review and Forecast 2012". Strategies Unlimited. 5th Edition: 56–85. January 2012.
  12. ^ Sparkes, M.; Gross, M.; Celotto, S.; Zhang, T.; O'Neil, W (2008). "Practical and theoretical investigations into inert gas cutting of 304 stainless steel using a high brightness fiber laser". Journal of Laser Applications. 20 (1042–346X): 59–67. Bibcode:2008JLasA..20...59S. doi:10.2351/1.2832402.
  13. ^ "The Worldwide Market for Lasers - Market Review and Forecast 2012". Strategies Unlimited. 5th Edition: 86–110. January 2012.
  14. ^ "OLED technology explained". OLED Info. OLED-info.com. Archived from the original on 15 October 2012. Retrieved 17 October 2012.
  15. ^ "Cinetyp Hollywood - film subtitles, video subtitles, DVD subtitles, film overlay, video, film, overlay, foreign subtitles, closed captioning, open captioning, spotting lists". Cinetyp.com. Archived from the original on 2009-02-28. Retrieved 2009-10-11.
  16. ^ "SM Cinema Adds Five More Christie 6P Laser Projectors". www.christiedigital.com. Archived from the original on 2017-10-18. Retrieved 2016-11-16.
edit
 
Wikimedia Commons has media related to Laser devices.
Retrieved from "https://en.wikipedia.org/w/index.php?title=List_of_laser_applications&oldid=1235960486#Military"