The Winds Italia Orbiter is a family of Italian paramotors that were designed by Randy Haney and produced by his company Winds Italia of Bologna for powered paragliding. Now out of production, when the series was available the aircraft were supplied complete and ready-to-fly.[1]

Orbiter
Role Paramotor
National origin Italy
Manufacturer Winds Italia
Designer Randy Haney
Status Production completed

Design and development

edit

The Orbiter series was designed to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. They feature a paraglider-style wing, single-place accommodation and a single engine in pusher configuration with a reduction drive and a 130 cm (51 in) diameter two-bladed wooden propeller. The fuel tank capacity is 5 litres (1.1 imp gal; 1.3 US gal).[1]

As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]

Reviewer Rene Coulon noted the Orbiter's design for both its aesthetics and robustness.[1]

Variants

edit
Orbiter
Model with a 14.5 hp (11 kW) Radne Raket 120 engine in pusher configuration with a 3.54:1 ratio reduction drive and a 130 cm (51 in) diameter two-bladed wooden propeller.[1]
Orbiter XP
Higher powered model with a 24 hp (18 kW) Cors'Air M21Y engine in pusher configuration with a 1.9:1 ratio reduction drive and a two-bladed wooden propeller. Other reduction ratios were factory available as options. The XP was supplied without an electric starter or battery to save weight. The resulting unit empty weight was 27 kg (60 lb).[1]

Specifications (Orbiter)

edit

Data from Bertrand[1]

General characteristics

  • Crew: one
  • Empty weight: 21 kg (46 lb) propulsion unit and harness only
  • Fuel capacity: 5 litres (1.1 imp gal; 1.3 US gal)
  • Powerplant: 1 × Radne Raket 120 single cylinder, two-stroke, air-cooled aircraft engine, with a 3.54:1 reduction drive, 10.8 kW (14.5 hp)
  • Propellers: 2-bladed wooden, fixed pitch, 1.30 m (4 ft 3 in) diameter

See also

edit

References

edit
  1. ^ a b c d e f g Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 77. Pagefast Ltd, Lancaster UK, 2003. ISSN 1368-485X