Mass fraction (chemistry)

(Redirected from Wt%)

In chemistry, the mass fraction of a substance within a mixture is the ratio (alternatively denoted ) of the mass of that substance to the total mass of the mixture.[1] Expressed as a formula, the mass fraction is:

Because the individual masses of the ingredients of a mixture sum to , their mass fractions sum to unity:

Mass fraction can also be expressed, with a denominator of 100, as percentage by mass (in commercial contexts often called percentage by weight, abbreviated wt.% or % w/w; see mass versus weight). It is one way of expressing the composition of a mixture in a dimensionless size; mole fraction (percentage by moles, mol%) and volume fraction (percentage by volume, vol%) are others.

When the prevalences of interest are those of individual chemical elements, rather than of compounds or other substances, the term mass fraction can also refer to the ratio of the mass of an element to the total mass of a sample. In these contexts an alternative term is mass percent composition. The mass fraction of an element in a compound can be calculated from the compound's empirical formula[2] or its chemical formula.[3]

Terminology

edit

Percent concentration does not refer to this quantity. This improper name persists, especially in elementary textbooks. In biology, the unit "%" is sometimes (incorrectly) used to denote mass concentration, also called mass/volume percentage. A solution with 1 g of solute dissolved in a final volume of 100 mL of solution would be labeled as "1%" or "1% m/v" (mass/volume). This is incorrect because the unit "%" can only be used for dimensionless quantities. Instead, the concentration should simply be given in units of g/mL. Percent solution or percentage solution are thus terms best reserved for mass percent solutions (m/m, m%, or mass solute/mass total solution after mixing), or volume percent solutions (v/v, v%, or volume solute per volume of total solution after mixing). The very ambiguous terms percent solution and percentage solutions with no other qualifiers continue to occasionally be encountered.

In thermal engineering, vapor quality is used for the mass fraction of vapor in the steam.

In alloys, especially those of noble metals, the term fineness is used for the mass fraction of the noble metal in the alloy. [4]

Properties

edit

The mass fraction is independent of temperature until phase change occurs.

edit

Mixing ratio

edit

The mixing of two pure components can be expressed introducing the (mass) mixing ratio of them  . Then the mass fractions of the components will be

 

The mass ratio equals the ratio of mass fractions of components:

 

due to division of both numerator and denominator by the sum of masses of components.

Mass concentration

edit

The mass fraction of a component in a solution is the ratio of the mass concentration of that component ρi (density of that component in the mixture) to the density of solution  .

 

Molar concentration

edit

The relation to molar concentration is like that from above substituting the relation between mass and molar concentration:

 

where   is the molar concentration, and   is the molar mass of the component  .

Mass percentage

edit

Mass percentage is defined as the mass fraction multiplied by 100.

Mole fraction

edit

The mole fraction   can be calculated using the formula

 

where   is the molar mass of the component  , and   is the average molar mass of the mixture.

Replacing the expression of the molar-mass products,

 

Spatial variation and gradient

edit

In a spatially non-uniform mixture, the mass fraction gradient gives rise to the phenomenon of diffusion.

See also

edit

References

edit
  1. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "mass fraction". doi:10.1351/goldbook.M03722
  2. ^ Formula from Mass Composition.
  3. ^ "How to Calculate Mass Percent Composition". ThoughtCo. Retrieved 2018-01-05.
  4. ^ John, Alex. "How to calculate molarity". Retrieved 28 September 2022.