Wikipedia

2-Ethyl-2-oxazoline

2-Ethyl-2-oxazoline (EtOx) is an oxazoline which is used particularly as a monomer for the cationic ring-opening polymerization to poly(2-alkyloxazoline)s.[2] This type of polymers are under investigation as readily water-soluble and biocompatible materials for biomedical applications.[3]

2-Ethyl-2-oxazoline
Names
Preferred IUPAC name
2-Ethyl-4,5-dihydro-1,3-oxazole
Other names
2-Ethyloxazoline
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.817 Edit this at Wikidata
UNII
  • InChI=1S/C5H9NO/c1-2-5-6-3-4-7-5/h2-4H2,1H3
    Key: NYEZZYQZRQDLEH-UHFFFAOYSA-N
  • CCC1=NCCO1
Properties
C5H9NO
Molar mass 99.133 g·mol−1
Density 0.982 g/mL[1]
Melting point −62 °C (−80 °F; 211 K)[1]
Boiling point 128.4 °C (263.1 °F; 401.5 K)[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Production

edit

From propionic acid and derivatives

edit

Carboxylic acids, carboxylic esters, carboxylic amides and nitriles can react with 2-amino alcohols at 200 °C upon dehydration to the corresponding N-(2-hydroxy)carbamide, which react further at 260–280 °C upon dehydration to the 2-alkyl-2-oxazoline.

 
Synthese von 2-Ethyl-2-oxazolin aus Carbonsäurederivaten

For example N-(2-hydroxyethyl)propionamide is first formed from propionic acid and ethanolamine in 74% yield which can be dehydrated to give 2-ethyl-2-oxazoline in about 75% yield.[4]

 
Synthese von 2-Ethyl-2-oxazolin über N-(2-Hydroxyethyl)propionamid

Less drastic reaction conditions require the dehydration of the N-(2-hydroxyethyl)propionamide in vacuo in the presence of iron(III)chloride, which delivers the product in 90% yield.[5] An even higher yield of 96.2% is obtained by heating with zinc acetate.[6]

An economic one-pot reaction is heating the salt of propionic acid with ethanolamine at 200 °C in vacuo in the presence of zinc chloride yielding 82% 2-ethyl-2-oxazoline.[6] From the water-containing distillate pure 2-ethyl-2-oxazoline can be isolated by extraction with diethylbenzene and subsequent distillation[6] or by distillation only after addition of diethyl phosphite or dimethyldichlorosilane. The product can be dried to a residual water content of 10 ppm.[7]

In another one-pot reaction propionic acid is converted first with 2-aminoethanol to 2-hydroxyethylamide, than reacted with boric acid at 130 °C yielding a boric acid ester which is finally thermolyzed at 280 °C in 92% yield to 2-ethyl-2-oxazoline.[8]

 
Synthese von 2-Ethyl-2-oxazolin über Boratester

From propionic acid and thionyl chloride can be obtained propanoyl chloride, which reacts with ethanolamine in the presence of an acid scavenger (for example pyridine) to N-propionyl-2-aminoethanol. With further thionyl chloride this reacts further to 2-chloroethylamide. With the chloride ion as a better leaving group, this intermediate is cyclized by simple heating to the oxazoline. Water must be excluded due to the tendency of oxazolines towards ring-opening by chloride ions during protonation of the imine nitrogen.[9]

 
Synthese von 2-Ethyl-2-oxazolin über Propionsäureäurechlorid

The direct reaction of propanoyl chloride with 2-chloroethylamine hydrochloride in the presence of triethylamine avoids the formation of water.

 
Synthese von 2-Ethyl-2-oxazolin mit Chlorethylamin

From propanal

edit

Propanal reacts with 2-aminoethanol in t-butanol to 2-ethyl-2-oxazoline in the presence of the iodinating reagent 1,3-diiodo-5,5-dimethylhydantoin (DIH) and potassium carbonate.[10]

 
Synthese von 2-Ethyl-2-oxazolin aus Propionaldehyd

Properties

edit

2-Ethyl-2-oxazoline is a readily water-soluble, colorless liquid which is also soluble in a variety of organic solvents and possesses an amine-like smell.[11] Aqueous solutions react alkaline. The compound is stable in alkaline but hydrolyses under acid action.

Applications

edit

In anhydrous form, 2-ethyl-2-oxazoline is mostly used as a monomer.[2]

The cationic ring-opening polymerization of 2-ethyl-2-oxazoline[12] can be initiated by alkylation with e.g. methyl tosylate or triflates (in particular methyl triflate) and leads to the water-soluble poly(2-ethyl-2-oxazoline) which is a propionyl-substituted linear polyethylenimine and can also be seen as a pseudo-polypeptide.[13]

 
Kationische lebende Polymerisation von 2-Ethyl-2-oxazolin

The polymerization of 2-ethyl-2-oxazoline can also be carried out as living cationic polymerization.[14]

Copolymers with other 2-alkyl-2-oxazolines[15] and other monomers[16] allow the preparation of random copolymers and block copolymers.

The copolymers obtained can be used as biocompatible drug carriers,[17] in coatings and adhesives, and in many other applications.[18]

The elimination of the propionyl group from poly (2-ethyl-2-oxazoline) yields linear polyethyleneimine.[19][20]

 
Herstellung von Linearem Polyethylenimin aus Poly(2-ethyloxazolin)

References

edit
  1. ^ a b c "2-Ethyl-2-oxazoline". Sigma-Aldrich.
  2. ^ a b T. Kagiya; S. Narisawa; T. Maeda; K. Fukui (1966), "Ring-opening polymerization of 2-substituted 2-oxazolines", J. Polym. Chem., Polym. Lett., vol. 4, no. 7, pp. 441–445, doi:10.1002/pol.1966.110040701
  3. ^ R. Hoogenboom (2009), "Poly(2-oxazoline)s: A polymer class with numerous potential applications", Angew. Chem. Int. Ed., vol. 48, no. 43, pp. 7978–7994, doi:10.1002/anie.200901607, PMID 19768817
  4. ^ H. Wenker (1935), "The synthesis of Δ2-oxazolines and Δ2-thiazolines from N-acyl-2-aminoethanols", J. Am. Chem. Soc., vol. 57, no. 6, pp. 1079–1080, doi:10.1021/ja01309a034
  5. ^ US 4203900, M.E. Kaiser, "Process for preparing 2-oxazolines", published 1980-05-20, assigned to The Dow Chemical Co. 
  6. ^ a b c US 4354029, M.E. Kaiser, D.L. Larson, "Preparation of 2-substituted 2-oxazolines with organic zinc salt catalysts", published 1982-10-12, assigned to The Dow Chemical Co. 
  7. ^ US 4281137, J.W. Sanner, P.W. Owen, "Purification of 2-oxazolines", published 1981-07-28, assigned to The Dow Chemical Co. 
  8. ^ B. Ilkgul; D. Gunes; O. Sirkecioglu; N. Bicak (2010), "Synthesis of 2-oxazolines via boron esters of N-(2-hydroxyethyl) amides", Tetrahedron Lett., vol. 51, no. 40, pp. 5313–5315, doi:10.1016/j.tetlet.2010.07.167
  9. ^ M.N. Holerca; V. Percec (2000), "1H NMR Spectroscopic Investigation of the Mechanism of 2-Substituted-2-Oxazoline Ring Formation and of the Hydrolysis of the Corresponding Oxazolinium Salts", Eur. J. Org. Chem., vol. 2000, no. 12, pp. 2257–2263, doi:10.1002/1099-0690(200006)2000:12<2257::AID-EJOC2257>3.0.CO;2-2
  10. ^ S. Takahashi; H. Togo (2009), "An Efficient Oxidative Conversion of Aldehydes into 2-Substituted 2-Oxazolines Using 1,3-Diiodo-5,5-dimethylhydantoin", Synthesis, vol. 2009, no. 14, pp. 2329–2332, doi:10.1055/s-0029-1216843
  11. ^ 2-Ethyl-2-oxazoline at AlfaAesar, accessed on 5. Juni 2016 (PDF) (JavaScript required).[dead link‍]
  12. ^ B.L. Rivas; S.I. Ananias (1987), "Ring-opening polymerization of 2-ethyl-2-oxazoline", Polym. Bull., vol. 18, no. 3, pp. 189–194, doi:10.1007/BF00255109, S2CID 94946485
  13. ^ H. Schlaad; R. Hoogenboom (2012), "Poly(2-oxazoline)s and Related Pseudo-Polypeptides", Macromol. Chem. Rapid Commun., vol. 33, no. 19, p. 1599, doi:10.1002/marc.201200571, PMID 22965791
  14. ^ Guerrero-Sanchez, Carlos; Hoogenboom, Richard; Schubert, Ulrich S. (2006). "Fast and "green" living cationic ring opening polymerization of 2-ethyl-2-oxazoline in ionic liquids under microwave irradiation". Chem. Commun. 36 (36): 3797–3799. doi:10.1039/B608364A. ISSN 1359-7345. PMID 16969461.
  15. ^ Glassner, Mathias; Lava, Kathleen; de la Rosa, Victor R.; Hoogenboom, Richard (November 2014). "Tuning the LCST of poly(2‐cyclopropyl‐2‐oxazoline) via gradient copolymerization with 2‐ethyl‐2‐oxazoline". Journal of Polymer Science Part A: Polymer Chemistry. 52 (21): 3118–3122. doi:10.1002/pola.27364. ISSN 0887-624X.
  16. ^ Motokucho, Suguru; Furukawa, Mutsuhisa; Kawashima, Masahiro; Kojio, Ken; Yoshinaga, Kohji (November 2013). "Physical properties of poly(tetrahydrofuran)-block-poly(2-ethyl-2-oxazoline) triblock copolymer". Polymer Journal. 45 (11): 1115–1119. doi:10.1038/pj.2013.39. hdl:10069/40210. ISSN 0032-3896.
  17. ^ de la Rosa, Victor R. (May 2014). "Poly(2-oxazoline)s as materials for biomedical applications". Journal of Materials Science: Materials in Medicine. 25 (5): 1211–1225. doi:10.1007/s10856-013-5034-y. ISSN 0957-4530. PMID 23975334. S2CID 1766066.
  18. ^ "Etox, 2-Ethyl-2-Oxazoline, Product Information Sheet". Polymer Chemistry Innovations, Inc. Retrieved 2016-07-19.
  19. ^ US 20100197888, A. Adib, F. Stock, P. Erbacher, "Method for manufacturing linear polyethyleneimine (PEI) for transfection purpose and linear PEI obtained with such method", published 2010-08-05, assigned to Polyplus Transfection 
  20. ^ Lambermont-Thijs, Hanneke M. L.; van der Woerdt, Friso S.; Baumgaertel, Anja; Bonami, Lies; Du Prez, Filip E.; Schubert, Ulrich S.; Hoogenboom, Richard (2010-01-26). "Linear Poly(ethylene imine)s by Acidic Hydrolysis of Poly(2-oxazoline)s: Kinetic Screening, Thermal Properties, and Temperature-Induced Solubility Transitions". Macromolecules. 43 (2): 927–933. doi:10.1021/ma9020455. ISSN 0024-9297.
Retrieved from "https://en.wikipedia.org/w/index.php?title=2-Ethyl-2-oxazoline&oldid=1224736406"