Albrecht mortars or Albrecht Schwerer Minenwerfers ('heavy mortar launchers') were a series of wooden heavy mortars used by the Imperial German Army during the First World War.

Albrecht mortar
A 25 cm sMW
TypeHeavy mortar
Place of originGerman Empire
Service history
In service1916-18
Used byGerman Empire
WarsWorld War I
Production history
DesignerAlbrecht
Designed1915
ManufacturerAlbrecht
Produced1916-18
Variants25 cm
35 cm
45 cm
Specifications
Mass289 kg (637 lb)
Length1.8 m (5 ft 11 in)
Width2.3 m (7 ft 7 in)
Height1.6 m (5 ft 3 in)[1]

ShellSeparate loading charge and 23.5 kg (52 lb) projectile
Caliber25 cm (9.8 in)
BreechMuzzle loaded
RecoilNone
CarriageTwo-wheeled
Elevation45°[1]
TraverseNone
Maximum firing range600 m (660 yd)[1]

History

edit

Although the majority of combatants had heavy field artillery prior to the outbreak of the First World War, none had adequate numbers in service, nor had they foreseen the growing importance of heavy artillery once the Western Front stagnated and trench warfare set in.[2]

Besides land mines, machine guns and trenches, barbed wire was a persistent threat to attacking infantry. Often barbed wire was used to channel attackers away from vulnerable areas of a defenders trenches and funnel attackers into predefined kill zones where overlapping fields of machine gun fire could be brought to bear. Rows of barbed wire could also be used to delay attackers allowing defenders time to man their trenches and to hold attackers at a safe distance to allow defenders to call in defensive artillery fire.[3]

What was needed to overcome the deadlock and give attackers an advantage was light, portable, simple, and inexpensive heavy firepower. A way to provide this was by designing a series of heavy trench mortars which could be brought to forward area trenches to launch heavy, short ranged preparatory bombardments to clear obstacles and neutralize enemy defenses.[4]

Design

edit

The Albrecht mortars came in a number of lengths and diameters 25–45 cm (10–18 in) each with their own projectiles. They consisted of a muzzle loaded smooth bore barrel built from wooden staves and wound with galvanized wire for reinforcement. The base of the mortar was a large wooden block and there was a crescent-shaped adjustable metal stand with a hand wheel to adjust elevation.[5]

Ammunition

edit

The propellant and projectiles were loaded separately and the projectile was a simple metal can with a reinforced wooden base and a wooden lid with handle. The projectile was filled with explosives and metal fragments. Range 50–600 m (55–656 yd) was controlled by a combination of varying elevation and amounts 50–700 g (2 oz – 1 lb 9 oz) of propellant.[6]

Projectiles weighed from 23.5 kg (52 lb) for the 25 cm, to 100 kg (220 lb) for the 35 cm, and 200 kg (440 lb) for the 45 cm model.[1] Accuracy, velocity, and range were all considered to be poor. The early projectiles also had poor aerodynamics, so later projectiles became more conical in shape. Due to poor aerodynamics, the projectiles sometimes fell on their side instead of their noses so timed fuses were used instead of impact fuses. The slow-moving projectiles were given the nickname of "coal buckets" by the French.[6]

edit

References

edit
  1. ^ a b c d "Search the Collections | Canadian War Museum". www.warmuseum.ca. Retrieved 2018-08-24.
  2. ^ Hogg, Ian (2000). Twentieth-century Artillery. New York: Barnes & Noble Books. ISBN 0-7607-1994-2. OCLC 44779672.
  3. ^ Netz, Reviel (2004). Barbed Wire: An Ecology of Modernity. Middletown, CT: Wesleyan University Press. pp. 108–127. ISBN 0-8195-6719-1. OCLC 728243601.
  4. ^ Batchelor, J. H. (1979). Land Power. New York: Exeter Books. pp. 33–34. ISBN 0-89673-010-7. OCLC 5718938.
  5. ^ "Large German mortars - what are they ?". Great War Forum. 28 December 2011. Retrieved 24 August 2018.
  6. ^ a b Bethion, Bernard (8 August 2018). "25cm Albrecht Werfer". www.passioncompassion1418.com. Retrieved 8 August 2018.