This article needs additional citations for verification. (October 2024) |
Ammonia poisoning is a common fish disease in new aquariums, especially when immediately stocked to full capacity. Ideally, the level of ammonia (NH3) and ammonium compounds (i.e. those containing NH4+) in fish tanks should be zero. Although trace amounts are generally harmless, they can still lead to problems over time.[1] Understanding the nitrogen cycle is essential for the keeping of any aquatic life.
The source of ammonia in fish tanks is fish's excretion.[1] Fish excrete ammonia as a nitrogenous waste product. A build-up of ammonia in the fish tank leads to ammonia poisoning. Species of ammonia-oxidizing bacteria (AOB) can break down the ammonia and convert it to other, less toxic, nitrogen products. Two examples of AOB are Nitrosospira and Nitrosomonas.[2]
The amount of ammonia present is usually accompanied by a rise in pH. As ammonia is a base, it is stabilized by acidic water. It can cause damage to the gills at a level as small as 0.25 mg/L.
Diagnosis
editA history of the tank, such as filter changes, power outages, excessive feeding, or the addition of microbicidal or antibiotic agents to aquarium can aid in diagnosis. An ammonia test is the most sure way of diagnosing ammonia poisoning.
Ammonia affects fish metabolism and their ability to absorb oxygen through their gills. This leads to a host of symptoms a few of which are:
- Purple, red or bleeding gills
- Fish may clamp, may appear darker in color
- Red streaking on the fins or body
- Fish may gasp for air at the surface of the tank water
- Torn and jagged fins
- Fish may appear weak and lay at the bottom of the tank.[3]
Prevention
edit
Ammonia poisoning can be prevented easily by first cycling the tank (see below). Treatments include immediately reducing the ammonia level through many small water changes. Alternatively, a chemical ammonia detoxifier can be used, though such chemicals are best used in only in emergencies and when absolutely necessary, and do not provide a substitute for adequate tank cycling. Once the ammonia is removed, the fish may recover if the damage is not too extensive. Increasing aeration may be desirable, as the fishes' gills are often damaged by ammonia. This can increase the probability of survival slightly. All other sources of stress should also be removed, and the cause of the ammonia should be addressed.
Tank cycling
editTank cycling is a process during which ammonia reducing bacteria are built up sufficiently to handle the tank bioload. Cycling refers to establishing bacterial colonies that regulate the nitrogen cycle, the conversion of ammonia to nitrite and finally to nitrate. There are two means of cycling a tank: Fish-in cycling whereby the fish produce waste and are the key ammonia source for the cycle and fishless cycling whereby liquid ammonia solution or decaying fish food is used to fuel the cycle. This process can take anywhere from six to eight weeks.[4]
See also
editReferences
edit- ^ a b Francis-Floyd R, Watson C, Petty D, Pouder D (July 2022). "Ammonia in Aquatic Systems". EDIS. 2022 (4). doi:10.32473/edis-fa031-2022. ISSN 2576-0009.
- ^ Burrell PC, Phalen CM, Hovanec TA (December 2001). "Identification of bacteria responsible for ammonia oxidation in freshwater aquaria". Applied and Environmental Microbiology. 67 (12): 5791–5800. Bibcode:2001ApEnM..67.5791B. doi:10.1128/AEM.67.12.5791-5800.2001. PMC 93373. PMID 11722936.
- ^ Irby LR, Podruzny KM (2001). Effects of highways on wildlife and fish with special reference to Montana a ProCite literature collection. Bozeman, Mont.: Fish and Wildlife Management Program, Montana State University. doi:10.5962/bhl.title.55529. OCLC 61501270.
- ^ Narten T. "What is meant by "Cycling Your Tank" and "New Tank Syndrome"?". Department of Computer Science. Duke University. Retrieved 2024-06-10.