The BSA Model 28P is an assault rifle of British origin. The weapon was considered to replace the .303 Lee–Enfield after 1945. However, the BSA 28P was outdated compared to its rival, the EM-2 and the L1A1 SLR asides the 7.62 NATO calibre.[1] The 28P rifle was tested during the summer of 1950 at Enfield but was not particularly accurate.[2] An explosion in the breech showed a fault and although a revised variant subsequently performed well, the project was abandoned.

BSA 28P
TypeAssault rifle
Place of origin United Kingdom
Production history
DesignerClaude Perry
Roger Wackrow
Designed1949–50
ManufacturerBirmingham Small Arms Company
No. built12/15
Specifications
Mass9.4 lb (4.3 kg)
Length42 in (1,100 mm)
Barrel length20 in (510 mm)

Cartridge.280 British
ActionGas-operated
Feed system15-round detachable box magazine
SightsOptical

Overview

edit

The Model 28P is gas operated, locked placing breech block into the left of the receiver. It has a squared receiver with an integral optical sight and pistol gripped half stock. The trigger section with a rack and pinion and weight device to slow its rate of fire with its radial lever selector marked A for full auto, R for single shot and S for safety, on the left side of the stock alongside the receiver. Rifling came with 5 grooves right hand. The flash hider came as a grenade launcher and could use a bayonet No5 Pattern.

References

edit
  1. ^ Hobart (1972), p. 109
  2. ^ Rifles of the World, 3rd edition, page 552

See also

edit