Wikipedia

Benchmark (surveying)

(Redirected from Bench-Mark)
For other uses, see Benchmark.
For broader coverage of this topic, see Survey marker.

The term benchmark, bench mark, or survey benchmark originates from the chiseled horizontal marks that surveyors made in stone structures, into which an angle iron could be placed to form a "bench" for a leveling rod, thus ensuring that a leveling rod could be accurately repositioned in the same place in the future. These marks were usually indicated with a chiseled arrow – specifically a broad arrow – below the horizontal line. A benchmark is a type of survey marker.

An Ordnance Survey cut mark in the UK
Occasionally a non-vertical face, and a slightly different mark, was used

The term is generally applied to any item used to mark a point as an elevation reference. Frequently, bronze or aluminum disks are set in stone or concrete, or on rods driven deeply into the earth to provide a stable elevation point. If an elevation is marked on a map, but there is no physical mark on the ground, it is a spot height.

Purpose

edit
Further information: Vertical position

The height of a benchmark is calculated relative to the heights of nearby benchmarks in a network extending from a fundamental benchmark. A fundamental benchmark is a point with a precisely known relationship to the vertical datum of the area, typically mean sea level. The position and height of each benchmark are shown on large-scale maps.

The terms "height" and "elevation" are often used interchangeably, but in many jurisdictions, they have specific meanings; "height" commonly refers to a local or relative difference in the vertical (such as the height of a building), whereas "elevation" refers to the difference from a nominated reference surface (such as sea-level, or a mathematical/geodetic model that approximates the sea level known as the geoid). Elevation may be specified as normal height (above a reference ellipsoid), orthometric height, or dynamic height which have slightly different definitions.[citation needed]

Other types of survey marks

edit
 
An Ordnance Survey flush bracket

Triangulation points, also known as trig points, are marks with a precisely established horizontal position. These points may be marked by disks similar to benchmark disks, but set horizontally, and are also sometimes used as elevation benchmarks. Prominent features on buildings such as the tip of a church spire or a chimney stack are also used as reference points for triangulation. In the United Kingdom, triangulation points are often set in large concrete markers that, as well as functioning as triangulation points, have a benchmark set into the side. With the increasing use of GPS and electronic distance measuring devices, the same techniques and equipment are used to fix the horizontal and vertical position of a survey marker at the same moment, and therefore the marks are usually regarded as "fixed in three dimensions".

Flush brackets are metal plates placed flush into the faces of buildings or other structures. Although many are attached to triangulation pillars as above, Non-Pillar Flush Brackets were also frequently located in the faces of buildings.[1]

Agencies responsible for benchmarks

edit
Further information: National mapping agency

Benchmarks are typically placed ("monumented") by a government agency or private survey firm, and many governments maintain a register of these marks so that the records are available to all. These records are usually in the form of a geographically searchable database (computer or map-based), with links to sketches, diagrams, photos of the marks, and any other technical details.

Government agencies that place and maintain records of benchmarks include:

Notable benchmarks

edit
  • The brass benchmark in the Amsterdam Stopera (combined city hall and opera house) is a tourist attraction, since the benchmark below the Dam square, which has been used for the zero level of Normaal Amsterdams Peil (NAP) in the Netherlands, is concealed by a manhole cover. The latter benchmark has been used also for the national zero level of other countries in northwest Europe as well as for the European Vertical Reference System (EVRS).
  • Benchmark A in Washington, D.C. is miniature replica of the Washington Monument. Installed in the late 1800s, this benchmark was used during the construction of the Monument and in subsequent surveys performed by the NGS. Upon completion of the monument grounds, Benchmark A was buried in a brick-lined pit and concealed by a manhole cover. In 2019, the "mini monument" was unveiled to the public for a brief time before being covered back up again.[5][6]
edit

See also

edit

References

edit
  1. ^ "Bench marks and levelling points". Heritage and History. Retrieved 27 September 2021.
  2. ^ nsgi.nl
  3. ^ "NAPinfo". Archived from the original on 2019-04-25. Retrieved 2020-03-31.
  4. ^ RDinfo
  5. ^ "Washington Mini Monument". Atlas Obscura. Retrieved 2021-05-25.
  6. ^ Sanchez, Victoria (2019-09-20). "Long hidden 'Mini Monument' unveiled for first time, will be covered up again". WJLA/ABC7. Retrieved 2021-05-25.
edit
 
Wikimedia Commons has media related to Trig points and benchmarks.
 
Wikisource has the text of the 1911 Encyclopædia Britannica article "Bench-mark".
Retrieved from "https://en.wikipedia.org/w/index.php?title=Benchmark_(surveying)&oldid=1252725591"