Bill Hall Trail

Bill Hall trail
Bill Hall trail
Location	Grand Canyon National Park, Arizona, United States
Trailheads	Colorado River
Use	Hiking
Sights	Grand Canyon
Hazards	Severe Weather; Overexertion; Dehydration; Flash Flood

The Bill Hall Trail is a hiking trail in Grand Canyon National Park, located in the U.S. state of Arizona.^[1]

Access

The trail begins at Monument Point along the north rim of the canyon on the boundary of the National Park, about 20 miles (32 km) west of the park services at North Rim, Arizona. Access to the trailhead is over 35 miles (56 km) of forest roads made of graded dirt, and a four-wheel drive vehicle is recommended for travel in the area. When roads are dry the trailhead can be accessed by a passenger car.

Description

From the dirt parking lot at the trailhead, the trail heads west and dips below the rim into the park. The trail makes several short, steep switchbacks during its descent through the upper canyon rock layers. In the Coconino Sandstone, the trail is at its steepest. There are numerous boulders, some very large, that require care to detour around or climb over. Some portions of this descent may require lowering of backpacks prior to downclimbing.

After 2 miles (3 km) of steep descent, the trail levels off along the Esplanade Sandstone until the junction with the Thunder River Trail. This junction marks the lower terminus of the trail.

The trail is named for Bill Hall who was a seasonal park ranger on the North Rim who was killed in the line of duty (automobile accident) in 1979.

References

^ Roos, Constance; Gibbons, Bob; Pritchard-Jones, Sian (2008). The Grand Canyon and the American Southwest: Trekking in the Grand Canyon, Zion and Bryce Canyon National Parks (2 ed.). Cicerone Press Limited. p. 88. ISBN 1-85284-453-1.